journal article·2017-11Open access

Life Cycle Assessment of heat transfer fluids in parabolic trough concentrating solar power technology

E. Batuecas, C. Mayo, R. Díaz, F.J. Pérez

Abstract

The majority of parabolic trough concentrating solar power plants consist of an indirect system where the heat transfer fluid (typically synthetic oil) exchanges energy with a secondary circuit which is connected to the power cycle. Synthetic oil has a technical limitation by the maximum operating temperature. This results in the search for new fluids. On the other hand, with the aim of having energy when there is no sun shining, it has increased the use of thermal storage. Thermal energy storage systems are composed of molten salts and presents higher operating temperatures than synthetic oil. Thus, direct systems, in which thermal storage and heat transfer fluid are unified and normally molten salts, emerge to improve the power cycle performance. To determine the future potential of direct systems, this paper evaluates the environmental damage of two types of molten salts and synthetic oil in order to decide whether the use of salts is better than synthetic oil, from an environmental point of view by using the Life Cycle Assessment (LCA) techniques. LCA results showed greater impacts in the syntheticoil case than the molten salts
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Phase Change Materials Research · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. International Energy Agency (IEA), WorldEnergy Outlook, OECD/IEA, Paris, 2013, 2013.
2. Decarbonizing the electric sector: combining renewable and nuclear energy using thermal storage10.1016/j.enpol.2012.01.055 ↗
3. International Energy Agency (IEA), WorldEnergy Outlook 2016. OECD/IEA, Paris, 2016.
4. Theoretical study on thermal stability of molten salt for solar thermal power10.1016/j.applthermaleng.2013.01.023 ↗
5. Corrosion of metals and salt hydrates used for thermochemical energy storage10.1016/j.renene.2014.09.059 ↗
6. A review on global solar energy policy10.1016/j.rser.2011.01.007 ↗
7. Reliability, availability and maintenance optimization of heat exchanger networks10.1016/j.applthermaleng.2009.02.013 ↗
8. Numerical study and optimization of mirror gap effect on wind load on parabolic trough solar collector10.1016/j.egypro.2015.03.027 ↗
9. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies, Renew10.1016/j.rser.2015.09.026 ↗
10. Comparative LCA Between Current and Alternative Waste-Based TES for CSP10.1007/s12649-016-9549-6 ↗
11. Molten salts database for energy applications10.1016/j.cep.2013.07.008 ↗
12. Thermal energy storage for solar power production
13. 2050 LCOE improvement using new molten salts for thermal energy storage in CSP plants10.1016/j.rser.2015.12.148 ↗
14. Heat transfer fluids for concentrating solar power systems–A review10.1016/j.apenergy.2015.01.125 ↗
15. Assessment of liquid metal technology status and research paths for their use as efficient heat transfer fluids in solar central receiver systems10.1016/j.solener.2013.03.025 ↗
16. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
17. E. Zarza Moya, Innovative working fluids for parabolic trough collectors, in: Advances in Concentrating Solar Thermal Research and Technology, Woodhead Publishing Series inEnergy, pp. 75–106, 2017. 〈http://dx.doi.org/10.1016/B978-0-08-100516-3.00005-8〉.10.1016/B978-0-08-100516-3.00005-8 ↗
18. Prospects and problems of concentrating solar power technologies for power generation in the desert regions, Renew10.1016/j.rser.2015.09.015 ↗
19. R. Cable, D. Blake, B. Kelly, D. Kearny, H. Price, P. Nava, N. Potrovitza, Overview on use of a Molten Salt HTF in a Trough Solar Field, NREL/PR-550-40028. 〈http://www.nrel.gov/docs/fy03osti/40028.pdf〉.
20. Experimental study on the heat transfer characteristics of a low melting point salt in a parabolic trough solar collector system10.1016/j.applthermaleng.2015.06.054 ↗
21. A. Maccari, Innovative Heat Transfer Concepts in Concentrating Solar Fields, ENEA Solar Thermodynamic Energy. 〈http://ec.europa.eu/energy/res/events/doc/maccari_enea.pdf〉.
22. Technical challenges and opportunities for concentrating solar power with thermal energy storage10.1115/1.4024143 ↗
23. Thermal performance of ionic liquids for solar thermal applications10.1016/j.expthermflusci.2014.08.002 ↗
24. D.M. Blake, L. Moens, M.J. Hale, H. Price, D. Kearney, U. Herrmann, New heat transfer and storage fluids for parabolic trough solar thermal electric plants, in: Proceedings of the 11th SolarPACES International Symposium On concentrating Solar Power and Chemical Energy Technologies, Zurich, Switzerland, September 4–6, 2002.
25. Molten salt mixture properties in RELAP5 code for thermodynamic solar applications10.1016/j.ijthermalsci.2008.01.007 ↗
26. High-temperature thermal stability of molten salt materials10.1002/er.1453 ↗
27. Central receiver system solar power plant using molten salt as heat transfer fluid
28. Direct steam generation in parabolic-trough collectors: a review about the technology and a thermo-economic analysis of a hybrid system10.1016/j.rser.2017.01.176 ↗
29. Advanced thermal storage fluids for solar parabolic trough systems10.1115/1.1531644 ↗
30. J.C. Gomez, High-Temperature Phase Change Materials (PCM) Candidates for Thermal Energy Storage (TES) Applications, NREL 303-275-3000. 〈http://www.nrel.gov/docs/fy11osti/51446.pdf〉.
31. Testing method of phase change temperature and heat of inorganic high temperature phase change materials10.1016/j.expthermflusci.2012.09.010 ↗
32. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants10.1016/j.apenergy.2013.12.061 ↗
33. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
34. Assessment of a molten salt heat transfer fluid in a parabolic trough solar field10.1115/1.1565087 ↗
35. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
36. Techno-economic comparison between CSP plants presenting two different heat transfer fluids10.1016/j.apenergy.2016.01.066 ↗
37. Archimede Solar Energy molten salt parabolic trough demo plant: a step ahead towards the new frontiers of CSP10.1016/j.egypro.2015.03.122 ↗
38. Overview on use of a molten salt HTF in a Trough solar field
39. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
40. Dynamic simulation of the operation of a molten salt parabolic trough plant, comprising draining procedures10.1016/j.egypro.2014.03.142 ↗
41. Molten salt receivers operated on parabolic trough demo plant and in laboratory conditions10.1016/j.egypro.2015.03.056 ↗
42. Object-oriented modeling for the transient performance simulation of parabolic trough collectors using molten salt as heat transfer fluid10.1016/j.solener.2013.05.015 ↗
43. D. Grogan, Development of Molten-Salt Heat Transfer Fluid Technology for Parabolic Trough Solar Power Plants-Public Final Technical Report, No. DOE/08GO18038 Abengoa Solar, 〈https://www.osti.gov/scitech/servlets/purl/1090096〉, 2013.10.2172/1090096 ↗
44. P. Viebahn, S. Kronshage, Y. Lechon, Deliverable n 12.2-RS Ia. Final report on technical data, costs, and life cycle inventories of solar thermal power plants. New Energy Externalities Developments for Sustainability (NEEDS). 〈http://www.needs-project.org/2009/Deliverables/RS1a%20D12.2%20Final%20report%20concentrating%20solar%20thermal%20power%20plants.pdf〉 (accessed 21 April 2017).
45. Life cycle environmental impacts of electricity production by solarthermal power plants in Spain10.1115/1.2888754 ↗
46. Exergetic and environmental life cycle assessment analysis of concentrated solar power plants10.1016/j.rser.2015.11.066 ↗
47. Chemisana, concentrating solar systems: life cycle assessment (LCA) and environmental issues10.1016/j.rser.2017.04.065 ↗
48. Corrosion of stainless steels and low-Cr steel in molten Ca(NO3)2–NaNO3–KNO3 eutectic salt for direct energy storage in CSP plants10.1016/j.solmat.2015.05.004 ↗
49. Corrosion properties of a ternary nitrate/nitrite molten salt in concentrated solar technology10.1016/j.renene.2015.01.072 ↗
50. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗
51. Improvement of the corrosion properties in ternary molten nitrate salts for direct energy storage in CSP plants10.1016/j.solener.2016.05.030 ↗
52. Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants10.1016/j.solmat.2016.12.002 ↗
53. Directly absorbing Therminol-Al2O3 nano heat transfer fluid for linear solar concentrating collectors10.1016/j.solener.2016.08.007 ↗
54. Experimental and numerical investigation on heat transfer of Therminol heat transfer fluid in an internally four-head ribbed tube10.1016/j.ijthermalsci.2017.01.020 ↗
55. Life cycle assessment as a tool in environmental impact assessment10.1016/S0195-9255(99)00045-1 ↗
56. ISO 14040 Environmental Management – Life Cycle Assessment - Principles and Framework, 2006.
57. ISO 14044 Environmental Management – Life Cycle Assessment – Requirements and Guidelines, 2006.
58. Scoping organizational LCA—challenges and solutions10.1007/s11367-015-0883-x ↗
59. B.P. Weidema, C. Bauer, R. Hischier, C. Mutel, T. Nemecek, J. Reinhard, G. Wernet, The Ecoinvent database: Overview and methodology, Data quality guideline for the Ecoinvent database version 3, 〈http://www.ecoinvent.org/files/dataqualityguideline_ecoinvent_3_20130506.pdf〉.
60. B.P. Weidema, Market information in life cycle assessment, No. 863. Miljøprojekt, 〈http://lca-net.com/files/Market-information-in-life-cycle-assessment.pdf〉.
61. TRACI 2.0: the tool for the reduction and assessment of chemical and other environmental impacts 2.010.1007/s10098-010-0338-9 ↗
62. Therminol 55. Heat Transfer Fluid by Eastman. 〈https://www.therminol.com/products/Therminol-55〉 (accessed 10 November 2016), 2016.
63. A review thermal energy storage technologies and control approaches for solar cooling10.1016/j.rser.2014.08.062 ↗
64. V.A. Kalichevsky, J.W. Payne, R. Frederick, Treatment of heat transfer salts, US Pattent Office 2375759 A. 〈http://www.google.com.na/patents/US2375759〉.
65. G. Picard, T. Flament, B. Tremillon, P. Saint-Paul, Process for stabilizing a mixture of molten alkali metal nitrates and alkali metal nitrites usable particularly as a heat transfer fluid and stabilized mixture thus obtained, U.S. Patent Office 4559993A, 〈https://patents.google.com/patent/US4559993A〉, 1985.
66. Normalisation figures for environmental life-cycle assessment: the Netherlands (1997/1998), Western Europe (1995) and the world (1990 and 1995)10.1016/S0959-6526(02)00132-4 ↗
67. PRé, various authors, SimaPro database manual methods library. PRé, Reported version 2.9, 〈https://www.pre-sustainability.com/download/DatabaseManualMethods.pdf〉, 2016.
68. The value debate: weighting of life cycle assessments in a global context: global diversity exists and has to be valued
69. Weighting in life cycle assessments in a global context10.1007/BF02978904 ↗
70. Normalisation and weighting in life cycle assessment: quo vadis?
71. Handbook on life cycle assessment operational guide to the ISO standards