journal article·2009-06

Optimization of lead- and cadmium-free front contact silver paste formulation to achieve high fill factors for industrial screen-printed Si solar cells

Seong Je Jeon, Sang Man Koo, Seon Am Hwang

Publisher page

Abstract

Abstract Screen-printed n + –p–p + solar cells were fabricated on Cz single crystalline Si material, with a 45 Ω/sq emitter and PECVD SiNx antireflective coating with a thickness of 700 A, using different Ag pastes and commercial leaded reference paste (CN33-462, Ferro Corp.). Ag and Al contacts were co-fired using a mass-production line equipped with mesh belt conveyer furnace systems (Centrotherm thermal solution GmbH & Co. KG). The average results for single crystalline Si solar cells (156 cm 2 ) are: I sc =5.043 A, V oc =0.621 V, R s =0.0087 Ω, R sh =15.3 Ω, FF=0.773, and E ff =16.45%. R sh and fill factor values of fabricated cells were slightly higher when compared with the commercial leaded Ag paste, although cells were fabricated by metallizing the lead-free silver pastes. For the lead-free Ag paste used in this study, the line pattern continuity is retained with improved edge definition in sharp contrast to that of reference Ag paste. Average value of R s was also equivalent approximately to that of the leaded Ag paste.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.