journal article·2015-01

Optimizing CO2 reduction conditions to increase carbon atom conversion using a Pt-RGO||Pt-TNT photoelectrochemical cell

Jun Cheng, Meng Zhang, Gai Wu, Xin Wang, Junhu Zhou, Kefa Cen

Publisher page

Abstract

Abstract This study aimed to determine the optimum conditions required to increase the carbon atom conversion rate in a Pt-RGO||Pt-TNT photoelectrochemical cell. The effects of Pt-RGO reduction time on CO 2 conversion, voltage applied through the cell, catholyte pH, and pore size of nickel foam as a catalyst support were investigated. The conversion rate of C atoms initially increased and then decreased with increasing Pt-RGO reduction time, increasing electrolyte pH, and decreasing nickel foam pore size. Although carbon atom conversion showed sustainable growth as the applied voltage increased, the current efficiency of CO 2 reduction products decreased because of enhanced proton interference when the voltage applied through the cell exceeds 2 V. A maximum carbon atom conversion rate of 1500 nmol/(cm 2 h) was obtained by Pt-RGO reduction for 24 h when a 2 V voltage was applied through the cell, the catholyte pH was 8.8, and nickel foam with an average pore size of 160 μm was used as a support. Under optimum conditions, the liquid product selectivity of CO 2 reduction reached 99%. The results of the study indicate that RGO-based catalysts have potential use as blueprints for CO 2 reduction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · CO2 Reduction Techniques and Catalysts · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Sustainable hydrocarbon fuels by recycling CO2 and H2O with renewable or nuclear energy10.1016/j.rser.2010.07.014 ↗
2. Recent progress in the electrochemical conversion and utilization of CO210.1039/C1CY00314C ↗
3. Toward solar fuels: photocatalytic conversion of carbon dioxide to hydrocarbons10.1021/nn9015423 ↗
4. Photochemical and photoelectrochemical reduction of CO210.1146/annurev-physchem-032511-143759 ↗
5. Photoelectrochemical reduction of aqueous carbon dioxide on p-type gallium phosphide in liquid junction solar cells10.1038/275115a0 ↗
6. Photoelectrochemical production of formic acid and methanol from carbon dioxide on metal-decorated CuO/Cu2O-layered thin films under visible light irradiation10.1016/j.apcatb.2014.04.021 ↗
7. Photoelectrochemical reduction of CO2 in water under visible-light irradiation by a p-type InP photocathode modified with an electropolymerized ruthenium complex10.1039/c0cc02061c ↗
8. Selective CO2 conversion to formate conjugated with H2O oxidation utilizing semiconductor/complex hybrid photocatalysts10.1021/ja204881d ↗
9. Electro and photoelectrochemical reduction of carbon dioxide on multimetallic porphyrins/polyoxotungstate modified electrodes10.1016/j.electacta.2013.10.142 ↗
10. Photoelectrocatalytic reduction of CO2 in LiOH/methanol at metal-modified p-InP electrodes10.1016/j.apcatb.2005.11.012 ↗
11. Photoelectrocatalytic reduction of CO2 into chemicals using Pt-modified reduced graphene oxide combined with Pt-modified TiO2 nanotube10.1021/es500364g ↗
12. A review of the aqueous electrochemical reduction of CO2 to hydrocarbons at copper10.1016/j.jelechem.2006.05.013 ↗
13. Inside cover picture: Cu2O/reduced graphene oxide composites for the photocatalytic conversion of CO2
14. A noble metal-free reduced graphene oxide-CdS nanorod composite for the enhanced visible-light photocatalytic reduction of CO2 to solar fuel10.1039/c3ta14493c ↗
15. Reduced graphene oxide-TiO2 nanocomposite as a promising visible-light-active photocatalyst for the conversion of carbon dioxide10.1186/1556-276X-8-465 ↗
16. Rapid microwave synthesis of CO tolerant reduced graphene oxide-supported platinum electrocatalysts for oxidation of methanol10.1021/jp107872z ↗
17. Platinum supported on reduced graphene oxide as a catalyst for hydrogenation of nitroarenes10.1016/j.carbon.2011.09.017 ↗
18. A new application for nickel foam in alkaline fuel cells10.1016/j.ijhydene.2009.06.035 ↗
19. PH-driven dissolution-precipitation: a novel route toward ultrathin Ni(OH)2 nanosheets array on nickel foam as binder-free anode for Li-ion batteries with ultrahigh capacity10.1039/c3ce41069b ↗
20. Hierarchical mesoporous NiCo2O4–MnO2 core–shell nanowire arrays on nickel foam for aqueous asymmetric supercapacitors10.1039/c3ta14647b ↗
21. Nickel foam based polypyrrole-Ag composite film: a new route toward stable electrodes for supercapacitors10.1039/C2NJ40590C ↗
22. Effects of pore size on the mechanical properties of three-dimensionally ordered macroporous nickel10.1016/j.matdes.2012.09.009 ↗
23. Effects of nickel foam dimensions on catalytic activity of supported Co–Mn–B nanocomposites for hydrogen generation from stabilized borohydride solutions10.1007/s10853-006-0786-0 ↗
24. Electrocatalytic conversion of CO2 to long carbon-chain hydrocarbons10.1039/b615275a ↗
25. Preparation of graphitic oxide10.1021/ja01539a017 ↗
26. Layer-by-layer assembly of ultrathin composite films from micron-sized graphite oxide sheets and polycations10.1021/cm981085u ↗
27. TiO2 nanotubes: synthesis and applications10.1002/anie.201001374 ↗
28. Progress on free-standing and flow-through TiO2 nanotube membranes10.1016/j.solmat.2011.11.004 ↗
29. The Scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
30. The production of graphene nanosheets decorated with silver nanoparticles for use in transparent, conductive films10.1016/j.carbon.2010.12.022 ↗
31. Stabilization of platinum oxygen-reduction electrocatalysts using gold clusters10.1126/science.1134569 ↗
32. Efficient reduction of graphite oxide by sodium borohydride and its effect on electrical conductance10.1002/adfm.200900167 ↗
33. Electrical and mechanical properties of carbon nanofiber/graphene oxide hybrid papers10.1016/j.compscitech.2014.06.012 ↗
34. A review on the electrochemical reduction of CO2 in fuel cells, metal electrodes and molecular catalysts10.1016/j.cattod.2013.11.037 ↗
35. Photo-electrochemical hydrogen generation from water using solar energy: materials-related aspects10.1016/S0360-3199(02)00022-8 ↗
36. TiO2 nanotubes: synthesis and applications10.1002/anie.201001374 ↗
37. TiO2 nanotubes for hydrogen generation by photocatalytic water splitting in a two-compartment photoelectrochemical cell10.1016/j.ijhydene.2011.08.112 ↗
38. A review on highly ordered, vertically oriented TiO2 nanotube arrays: fabrication, material properties, and solar energy applications10.1016/j.solmat.2006.04.007 ↗
39. Graphene-based ultracapacitors10.1021/nl802558y ↗
40. Fine structure constant defines visual transparency of graphene10.1126/science.1156965 ↗
41. Effects of NaOH concentration on CO2 reduction via hydrothermal water10.1063/1.2207074 ↗
42. The teraton challenge: a review of fixation and transformation of carbon dioxide10.1039/B912904A ↗
43. The effect of pore size and porosity on thermal management performance of phase change material infiltrated microcellular metal foams10.1016/j.applthermaleng.2013.11.072 ↗
44. Effects of pore size on the mechanical properties of three-dimensionally ordered macroporous nickel10.1016/j.matdes.2012.09.009 ↗
45. Electrocatalytic properties of Ni–S–Co coating electrode for hydrogen evolution in alkaline medium10.1016/S1003-6326(07)60170-8 ↗
46. Amorphous cobalt–boron/nickel foam as an effective catalyst for hydrogen generation from alkaline sodium borohydride solution10.1016/j.jpowsour.2007.11.023 ↗
47. Toluene removal by a DBD-type plasma combined with metal oxides catalysts supported by nickel foam10.1016/j.cattod.2007.06.025 ↗