Analysis of recombination losses in screen-printed aluminum-alloyed back surface fields of silicon solar cells by numerical device simulation
Source abstract
Abstract
Abstract The Al-alloyed back surface field (Al-BSF) is a current topic in research and development of crystalline Si solar cells for mass production. We simulate the solar cells in full-size with numerical device modeling, based on incomplete ionization and updated parameters of the Al–O complex in the Al-BSF region, combined with SPICE circuit models. The simulations show that for full-area rear contact, the full-area Al-BSFs should optimally be about 6 μm deep; in shallower Al-BSFs, recombination at the metal contact dominates; and in deeper Al-BSFs, recombination via Al–O defects dominates. The recombination in the Al-BSF dominates the cell's total recombination in well optimized cells. The optimally attainable cell efficiency then is about 18.8% after degradation of the B–O complex in the boron-doped wafer, or 19.1% after deactivating the B–O complexes as completely as currently possible. In PERC cells, having screen-printed Al-BSF fingers and a rear Al2O3 passivation layer, cell efficiency reaches about 19.6% or 20.3% after degradation or deacivation, respectively, with an improved homogeneous emitter that is feasible for mass production, and with screen-printing front contacts. Ideally, the design strategies for PERC structure with various wafer resistivities and rear finger widths are shown. The reduction in cell efficiency due to three different types of voids (cavities) in local Al-BSFs is also quantified in detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. D.H. Neuhaus, A. Münzer, Industrial silicon wafer solar cells, Advances in Optoelectronics 2007, Article ID 24521, 1–15.10.1155/2007/24521 ↗
2. M.B. Field and L.R. Scudder, Application of Thick-Film Technology to Solar Cell Fabrication, in: Proceedings of 12th IEEE Photovoltaic Specialists Conference, Baton Rouge, USA, 1976, pp. 303–308.
3. A new electric field effect in silicon solar cells10.1063/1.1662040 ↗
4. F. Huster, Investigation of the Alloying Process of Screen Printed Aluminium Pastes for the BSF Formation on Silicon Solar Cells, in: Proceedings of 20th European Photovoltaic Solar Energy Conference, Barcelona, Spain, 2005, pp. 1466–1469.
5. Formation of aluminum–oxygen complexes in highly aluminum-doped silicon10.1088/0268-1242/25/10/105007 ↗
6. Evaluating the aluminum-alloyed p+-Layer of silicon solar cells by emitter saturation current density and optical microspectroscopy measurements10.1109/TED.2010.2093145 ↗
7. Effective passivation of highly aluminum-doped p-type silicon surfaces using amorphous silicon10.1063/1.2784193 ↗
8. P. Lölgen, C. Leguijt, J. A. Eikelboom, R.A. Steeman, W.C. Sinke, L.A. Verhoef, P.F.A. Alkemade, E. Algra. Aluminium Back-Surface Field Doping Profiles With Surface Recombination Velocities Below 200cm/s, in: Proceedings of 23rd IEEE Photovoltaic Specialists Conference, Louisville, USA, 1993, pp. 236–242.
9. S. Narasimha and A. Rohatgi. Optimized Aluminum Back surface field Techniques for Silicon Solar Cells, in: Proceedings of 26th IEEE Photovoltaic Specialists Conference, Anaheim, USA, 1997, pp. 63–66.10.1109/PVSC.1997.653925 ↗
10. S. Bowden, D.S Kim, C. Honsberg and A. Rohatgi. Rapid Thermal Processing for Front and Rear Contact Passivation, in: Proceedings of 29th IEEE Photovoltaic Specialists Conference, New Orleans, USA, 2002, pp. 410–413.10.1109/PVSC.2002.1190546 ↗
11. Contact formation and recombination at silicon solar cell base contacts10.1109/TED.2011.2161089 ↗
12. P.P. Altermatt, S. Steingrube, Y. Yang, C. Sprodowski, T. Dezhdar, S. Koc, B. Veith, S. Herrman, R. Bock, K. Bothe, J. Schmidt, R. Brendel, Highly Predictive Modeling of Entire Si Solar Cells for Industrial Applicaitons, in:Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany,2009, pp.901–906.
13. A simulation model for the density of states and for incomplete ionization in crystalline silicon. II. Investigation of Si:As and Si:B and usage in device simulation
14. Effect of incomplete ionization for the description of highly aluminum-doped silicon
15. Rosenits · Erratum on “Determining the defect parameters of the deepaluminum-related defect center in silicon” [Appl. Phys. Lett. 91, 122109 (2007)] Applied Physics Letters · 2011 · 99 · 239904
16. Recombination lifetimes in highly aluminum-doped silicon10.1063/1.3253742 ↗
17. Sentaurus Device, Version C- 2012.06, from Synopsys Inc, Mountain View, CA.
18. Models for numerical device simulations of crystalline silicon solar cells—a review10.1007/s10825-011-0367-6 ↗
19. Loss analysis and improvements of industrially fabricated Cz–Si solar cells by means of process and device simulations10.1016/j.egypro.2011.06.134 ↗
20. LTspice IV, Version 4 (2013), from Linear Technology, Milpitas, CA.
21. Simulation tool for equivalent circuit modeling of photovoltaic devices10.1109/JPHOTOV.2012.2187774 ↗
22. D.E. Kane and R.M. Swanson, Measurement of the Emitter Saturation Current by a Contactless Photoconductivity Decay Method, in: Proceedings of 18th IEEE Photovoltaic Specialists Conference, Las Vegas, USA, 1985, pp. 578–583.
23. Numerical modeling of highly doped Si:P emitters based on Fermi–Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
24. H. Mäckel and K. Varner, On the Determination of the Emitter Saturation Current Density From Lifetime Measurements of Silicon Devices, Progress in photovoltaics, online (2012), DOI:10.1002/pip.2167.10.1002/pip.2167 ↗
25. Fundamental boron-oxygen-related carrier lifetime limit in mono- and multicrystalline silicon10.1002/pip.586 ↗
26. Electronic properties of light-induced recombination centers in boron-doped Czochralski silicon10.1063/1.371186 ↗
27. Electronic properties of the metastable defect in boron-doped Czochralski silicon: unambiguous determination by advanced lifetime spectroscopy10.1063/1.1544431 ↗
28. N.P. Harder, P.P. Altermatt, A. Cuevas, G. Heiser, Numerical Modeling of Rear Junction Si Solar Cells Using Fermi-Dirac Statistics, in: Proceedings of 19th European Photovoltaic Solar Energy Conference, Paris, France, 2004, pp. 828–831.
29. E. Cornagliotti, A Uruena, J. Horzel, J. John, L. Tous, D. Hendrickx, V. Prajapati, S. Singh1, R. Hoyer, F. Delahaye, K. Weise, D. Queisser, H. Nussbaumer and J. Poortmans, How Much Rear Side Polishing is Required? A study on the Impact of Rear Side Polishing in PERC Solar Cells, in: Proceedings of 27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 2012, pp. 561–566.10.1016/j.egypro.2012.07.110 ↗
30. C. Kranz, S. Wyczanowski, S. Dorn, K. Weise, C. Klein, K. Bothe, T. Dullweber, R. Brendel, Impact of the Rear Surface Roughness on Industrial-type PERC Solar Cells, in: Proceedings of 27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 2012, pp. 557–560.
31. Effective surface passivation of crystalline silicon using ultrathin Al2O3 films and Al2O3/SiNx stacks, Phys10.1002/pssr.200903272 ↗
32. K.A. Münzer, J. Schöne, M. Hanke, M. Hein, A. Teppe, J. Maier, R.E. Schlosser, A. Yodyunyong, K. Varner, H. Habenicht, T. Friess, P. Winter, S. Keller and P. Fath, Centaurus Solar Cell Technology in Production, in: Proceedings of 27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 2012, pp. 666–671.10.1016/j.egypro.2012.07.121 ↗
33. A. Upadhyaya, V. Yelundur, S. Ramanathan, J.-H. Lai, V. Upadhyaya, A. Rohatgi, L. Koehler, Enhanced Front and Rear Dielectric Passivation for Commercially Grown Czochralski Silicon for High Efficiency Solar Cells, in: Proceedings of 34th IEEE Photovoltaic Specialists Conference, Philadelphia, USA, 2009, pp. 1754–1757.10.1109/PVSC.2009.5411457 ↗
34. Fire-through contacts—a new approach to contact the rear side of passivated silicon solar cells10.1016/j.solmat.2012.09.029 ↗
35. Rear-surface passivation technology for crystalline silicon solar cells: a versatile process for mass production10.1109/JPHOTOV.2012.2211338 ↗
36. 19%—efficient and 43µm—thick crystalline Si solar cell from layer transfer using porous silicon10.1002/pip.1129 ↗
37. Interface recombination parameters of atomic-layer-deposited Al2O3 on crystalline silicon
38. 19% efficient thin-film crystalline silicon solar cells from layer transfer using porous silicon: a loss analysis by means of three-dimensional simulations10.1109/TED.2012.2183001 ↗
39. Comparison of ICP-Alox and ALD-Al2O3 layers for the rear surface passivation of c-Si solar cells10.1016/j.egypro.2012.07.080 ↗
40. Impurity-related limitations of next-generation industrial silicon solar cells10.1109/JPHOTOV.2012.2210030 ↗
41. Rear-surface passivation technology for crystalline silicon solar cells: a versatile process for mass production10.1109/JPHOTOV.2012.2211338 ↗
42. Fischer · 1994 · 45
43. V. Meemongkolkiat, K. Nakayashiki, D.S. Kim, S. Kim, A. Shaik, A. Kuebelbeck, Investigation of Modified Screen-Printing Al Pastes for Local Back Surface Field Formation, in: Proceedings of 4th World Conference on Photovoltaic Energy Conversion, Waikaloa, USA, 2006, pp. 1338–1341.10.1109/WCPEC.2006.279678 ↗
44. Aluminum alloying in local contact areas on dielectrically passivated rear surfaces of silicon solar cells10.1109/LED.2011.2143385 ↗
45. Recombination at local aluminum-alloyed silicon solar cell base contacts by dynamic infrared lifetime mapping10.1016/j.egypro.2011.06.146 ↗
46. D. Chen, Z. Liang, Y. Yang, H. Shen, Y. Liu, Structure Simulation of Screen Printed Local Back Surface Field for Rear Passivated Silicon Solar Cells, in: Proceedings of 38th IEEE Photovoltaic Specialists Conference, Austin, USA, 2012, to be published.10.1109/PVSC.2012.6317775 ↗
47. Silicon diffusion in aluminum for rear passivated solar cells