journal article·2013-07

Facile hot solvent vapor annealing for high performance polymer solar cell using spray process

Yu-Ching Huang, Hou-Chin Chia, Chih-Min Chuang, Cheng-Si Tsao, Charn-Ying Chen, Wei-Fang Su

Publisher page

Abstract

Abstract In this paper, the use of hot solvent vapor (HSV) annealing is demonstrated to improve the performance of polymer solar cells (PSCs) fabricated by the spray process. The blend of poly(3-hexylthiophene) and [6,6]-phenyl-C61-butyric acid methyl ester (P3HT/PCBM) is used as a photoactive layer of the solar cell. Compared to the conventional solvent vapor annealing, the HSV annealing can eliminate the formation of intra-droplet boundary during the spray process and optimize the nanostructure of the film quickly (≤5 min). The study of conducting atomic force microscopy (C-AFM) reveals that the HSV annealed film exhibits smooth film surface and homogenous conductivity distribution. Moreover, an enhanced light harvesting and increased crystallinity of P3HT in the active layer are observed by UV–vis absorption and X-ray diffraction (XRD). With subsequent thermal annealing, the power conversion efficiency of solar cell made from the HSV annealed film is reached at 3.61%. This HSV annealing technique can be implemented into the fabrication of high efficient large-area PSCs using the spray process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
2. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
3. Patternable solution process for fabrication of flexible polymer solar cells using PDMS10.1016/j.solmat.2011.09.012 ↗
4. Spray-coated organic solar cells with large-area of 12.25cm210.1016/j.solmat.2010.10.033 ↗
5. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
6. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
7. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
8. High-yield synthesis and electrochemical and photovoltaic properties of dndene-C70 bisadduct10.1002/adfm.201001122 ↗
9. Efficiency enhancement of polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct via methylthiophene additive10.1002/aenm.201100378 ↗
10. A simple and effective way of achieving highly efficient and thermally stable bulk-heterojunction polymer solar cells using amorphous fullerene derivatives as electron acceptor10.1021/cm9009282 ↗
11. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
12. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
13. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%
14. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
15. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
16. Investigation of energy transfer in organic photovoltaic cells and impact on exciton diffusion length measurements10.1002/adfm.201001928 ↗
17. Solvent-induced morphology in polymer-based systems for organic photovoltaics10.1002/adfm.201100945 ↗
18. A new model for the morphology of P3HT-PCBM organic photovoltaics from small-angle neutron scattering rivers and streams10.1021/nn200744q ↗
19. Sequential processing: control of nanomorphology in bulk heterojunction solar cells10.1021/nl202320r ↗
20. The nanoscale morphology of a PCDTBT:PCBM photovoltaic blend10.1002/aenm.201100144 ↗
21. Moving through the phase diagram: morphology formation in solution cast polymer–fullerene blend films for organic solar cells10.1021/nn2036279 ↗
22. Morphology control in solution-processed bulk-heterojunction solar cell mixtures10.1002/adfm.200900775 ↗
23. Evolution of structure, optoelectronic properties, and device performance of polythiophene:fullerene solar cells during thermal annealing10.1002/adfm.201002300 ↗
24. In situ measurement of power conversion efficiency and molecular ordering during thermal annealing in P3HT:PCBM bulk heterojunction solar cells10.1039/c1jm12677f ↗
25. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
26. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
27. Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer–fullerene solar cells10.1016/j.solmat.2011.09.059 ↗
28. Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
29. Solvent-annealed crystalline squaraine: PC70BM (1:6) solar cells10.1002/aenm.201100045 ↗
30. Precise construction of PCBM aggregates for polymer solar cells via multi-step controlled solvent vapor annealing10.1039/B917533D ↗
31. The role of mesoscopic PCBM crystallites in solvent vapor annealed copolymer solar cells10.1021/nn800878c ↗
32. Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing10.1039/B713926H ↗
33. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
34. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
35. Airbrush spray-coating of polymer bulk-heterojunction solar cells10.1016/j.solmat.2011.01.047 ↗
36. Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality10.1364/OE.18.00A272 ↗
37. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
38. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
39. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
40. High-performance organic solar cells with spray-coated hole-transport and active layers10.1002/adfm.201001562 ↗
41. Multi-source/component spray coating for polymer solar cells10.1021/nn901758p ↗
42. Facile external treatment for efficient nanoscale morphology control of polymer solar cells using a gas-assisted spray method10.1039/c0jm03899g ↗
43. Effective variables to control the fill factor of organic photovoltaic cells10.1021/am900155y ↗
44. Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy10.1016/j.solmat.2008.10.027 ↗
45. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
46. Simultaneous use of small- and wide-angle X-ray techniques to analyze nanometerscale phase separation in polymer heterojunction solar cells10.1002/adma.200703097 ↗