journal article·2014-01

Evaluation of implantation annealing for highly-doped selective boron emitters suitable for screen-printed contacts

Ralph Müller, Jan Benick, Nicholas Bateman, Jonas Schön, Christian Reichel, Armin Richter, Martin Hermle, Stefan W. Glunz

Publisher page

Abstract

Ion implantation is a technology suitable for the formation of high quality junctions in silicon solar cell processing. As screen-printing is the state of the art metallization technique for industrial solar cells, the compatibility of ion implanted boron emitters with this metallization technique will be investigated. The fact that selective emitter structures can be in situ formed allows a high freedom in the design of the final emitter structure to meet the different demands of the metallized and passivated part of the emitter. In this work we investigate high dose implantations for the metallized area and low dose implantations for the passivated area that subsequently receive a short furnace anneal at 950 or 1050 °C. Applying a high dose in the range of 3e15 cm −2 high surface concentrations of around 6e19 cm −3 can be reached, allowing for a good contact of the screen-printed metallization. The passivated part of the emitter can be realized by implanting a lower dose (<1e15 cm −2). The sheet resistance is in the range of 110–160 Ω/sq resulting in very low emitter saturation current densities between 10 and 40 fA/cm 2. Those experimental results demonstrate that ion implantation of selective boron emitters is compatible with industrial screen-printing technology and enables high cell efficiencies.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Developing novel low-cost, high-throughput processing techniques for 20%-efficient monocrystalline silicon solar cells
2. C.E. Dubé, B. Tsefrekas, D. Buzby, R. Tavares, W. Zhang, A. Gupta, R.J. Low, W. Skinner, J.B. Mullin, High efficiency selective emitter cells using patterned ion implantation, in: Proceedings of the 1st International Conference on Silicon Photovoltaics, Freiburg, Germany, Energy Procedia 8 (2011) 706–71110.1016/j.egypro.2011.06.205 ↗
3. J. Benick, N. Bateman, M. Hermle, Very low emitter saturation current densities on ion implanted boron emitters, in: Proceedings of the 25th European PV Solar Energy Conference, Valencia, Spain, (2010).
4. J. Benick, R. Müller, N. Bateman, M. Hermle, Fully implanted PERT solar cells, in: Proceedings of the 27th European PV Solar Energy Conference, Frankfurt, Germany, (2012).
5. High-throughput ion-implantation for low-cost high-efficiency silicon solar cells10.1016/j.egypro.2012.02.002 ↗
6. M. Sheoran, M. Emsley, M. Yuan, D. Ramappa, P. Sullivan, Ion-implant Doped Large-area n-type Czochralski high-efficiency industrial solar cells, in: Proceedings of the 38th IEEE photovoltaics specialists conference, Austin, Texas, (2012).10.1109/PVSC.2012.6318046 ↗
7. n-Type, ion-implanted silicon solar cells and modules10.1109/JPHOTOV.2011.2169944 ↗
8. Y.W. Ok, A. Upadhyaya, Y. Tao, F. Zimbardi, S. Ning, A. Rohatgi, Ion-implanted and screen-printed large area 19.6% efficient n-type bifacial Si solar cells, in: Proceedings of the 38th IEEE photovoltaics specialists conference, Austin, Texas, (2012).10.1109/PVSC.2012.6318042 ↗
9. A. Kalio, A. Richter, M. Glatthaar, J. Wilde, Study of contact formation of printed contacts through different passivation layers on lowly doped emitters, in: Proceedings of the 3rd International Conference on Silicon Photovoltaics, Hamelin, Germany, Energy Procedia (2013).
10. Synopsys, ,.Synopsys TCAD, release G-2012.06, in: 〈http://www.synopsys.com〉, 2012.
11. J. Schön, A. Abdollahinia, R. Müller, J. Benick, M. Hermle, W. Warta, M.C. Schubert, Predictive simulation of doping processes for silicon solar cells, in: Proceedings of the 3rd International Conference on Silicon Photovoltaics, Hamelin, Germany, Energy Procedia (2013).
12. M. Hermle, J. Benick, N. Bateman, S.W. Glunz N-type Silicon solar cells with implanted emitter, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, (2011).
13. H. Ryssel, I. Ruge, Ionenimplantation, Akademische Verlagsgesellschaft Geest & Portig K.G., Leipzig, 1978.10.1007/978-3-663-05668-3 ↗
14. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method (silicon solar cells), in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, Las Vegas, Nevada, USA, (1985).
15. K.R. McIntosh, P.P. Altermatt, A freeware 1D emitter model for silicon solar cells, in: Proceedings of the 35th IEEE photovoltaics specialists conference, Honolulu, (2010).10.1109/PVSC.2010.5616124 ↗
16. General parameterization of Auger recombination in crystalline silicon10.1063/1.1432476 ↗
17. Evolution of boron-interstitial clusters in crystalline Si studied by transmission electron microscopy10.1063/1.2757145 ↗
18. Extended defects in shallow implants10.1007/s00339-002-1944-0 ↗
19. Experimental evidences for two paths in the dissolution process of B clusters in crystalline Si10.1063/1.2126128 ↗
20. Thermal evolution of extended defects in implanted Si: impact on dopant diffusion10.1016/S1369-8001(00)00043-3 ↗