Influence of the sulphurization time on the morphological, chemical, structural and electrical properties of Cu2ZnSnS4 polycrystalline thin films
Source abstract
Abstract
Abstract The effects of the sulphurization annealing time on the morphological, chemical, structural and electrical properties of CZTS thin films were investigated by scanning electron microscopy, X-ray energy dispersive spectroscopy, Hall effect and electrical conductivity measurements in samples annealed during different time intervals. The increase of the annealing time was found to improve the chemical composition of the samples and to, slightly, increase the crystallite size. Small amounts of Na were measured in the samples. However, the concentration of Na does not increase significantly with the annealing time and should not modify the characteristics of the CZTS thin films. It was also found that at high temperature the electrical conductivity is dominated by thermal emission of carriers over the inter-grain potential barriers. As the temperature decreases different hopping conduction mechanisms start to dominate. At first with nearest-neighbour hopping and successively changing to variable range hopping conduction with a crossover from Mott and Efros–Shklovskii behavior. The electrical conductivity, the concentration of free holes, acceptors and donors, traps' density at the grain boundaries and the grain potential barriers height were found to increase with the annealing time. However, a significant drop in the compensation ratio from 0.8 to 0.5 was also detected.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Growth and characterization of Cu2ZnSn(S,Se)4 thin films for solar cells10.1016/j.solmat.2012.02.031 ↗
2. Growth pressure dependence of Cu2ZnSnSe4 properties10.1016/j.solmat.2010.07.008 ↗
3. Photoluminescence and electrical study of fluctuating potentials in Cu2ZnSnS4-based thin films10.1103/PhysRevB.84.024120 ↗
4. Study of optical and structural properties of Cu2ZnSnS4 thin films10.1016/j.tsf.2010.12.105 ↗
5. The influence of hydrogen in the incorporation of Zn during the growth of Cu2ZnSnS4 thin films10.1016/j.solmat.2011.08.008 ↗
6. Sustainability of photovoltaics: the case for thin film solar cells10.1016/j.rser.2009.05.001 ↗
7. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
8. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
9. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
10. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS410.1063/1.3275796 ↗
11. H. Katagiri, K. Jimbo, M. Tahara, H. Araki, K. Oishi, The influence of the composition ratio on CZTS-based thin film solar cells, in: A. Yamada, C. Heske, M. Contreras, M. Igalson, S.J.C. Irvine (Eds.), Thin-Film Compound Semiconductor Photovoltaics 2009, Materials Research Society Symposium Proceedings, vol. 1165, San Francisco, USA, April 13–17, 2009, pp. 1165-M04–01.
12. High-efficiency solar cell with earth-abundant liquid-processed absorber10.1002/adma.200904155 ↗
13. Grain-boundary recombination in Cu(In,Ga)Se2 solar cells10.1063/1.2133906 ↗
14. Numerical simulation of carrier collection and recombination at grain boundaries in Cu(In,Ga)Se2 solar cells10.1063/1.2917293 ↗
15. Understanding the defect physics in polycrystalline photovoltaic materials10.1016/j.physb.2007.08.106 ↗
16. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
17. Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In,Ga)Se2 thin films used in photovoltaic applications10.1103/PhysRevB.84.165324 ↗
18. Admittance spectroscopy of Cu2ZnSnS4 based thin film solar cells10.1063/1.4726042 ↗
19. Hopping conduction and persistent photoconductivity in Cu2ZnSnS4 thin films10.1088/0022-3727/46/15/155107 ↗
20. Effects of sulphurization time on Cu2ZnSnS4 absorbers and thin films solar cells obtained from metallic precursors10.1016/j.solmat.2013.03.032 ↗
21. Optical analysis of the microstructure of a Mo back contact for Cu(In,Ga)Se2 solar cells and its effects on Mo Film properties and Na diffusivity10.1016/j.solmat.2011.02.030 ↗
22. Grain size and texture of Cu2ZnSnS4 thin films synthesized by cosputtering binary sulfides and annealing: effects of processing conditions and sodium10.1007/s11664-011-1729-3 ↗
23. Effect of sodium diffusion on the structural and electrical properties of Cu2ZnSnS4 thin films10.1016/j.solmat.2010.12.012 ↗
24. Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation10.1063/1.1646758 ↗
25. Effects of NaF coevaporation on structural properties of Cu(In,Ga)Se2 thin films10.1016/S0040-6090(03)00246-3 ↗
26. Salomé · Cu(In,Ga)Se2 solar cells with varying Na content prepared on nominally alkali-free glass substrates. IEEE J. Photovolt. · 2013 · 3 · 852
27. The effect of NaF precursors on low temperature growth of CIGS thin film solar cells on polyimide substrates10.1002/pssa.200881144 ↗
28. The Scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
29. Electronic transport in polycrystalline films10.1146/annurev.ms.05.080175.001221 ↗
30. Electronic and optical properties of Cu2ZnSnS4 and Cu2ZnSnSe410.1063/1.3318468 ↗
31. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
32. 3D hopping conduction in SnO2 nanobelts10.1002/pssr.201206161 ↗
33. Hopping conduction in lightly doped semiconductors
34. Temperature dependent conductivity of polycrystalline Cu2ZnSnS4 thin films10.1063/1.4731875 ↗
35. Mott · 1979
36. Efros · 1984
37. Pollak · 1985
38. Electronic effects of sodium in epitaxial CuIn1−xGaxSe210.1063/1.366365 ↗
39. Na incorporation into Cu(In,Ga)Se2 for high-efficiency flexible solar cells on polymer foils10.1063/1.1857059 ↗
40. The effect of Mo back contact ageing on Cu(In,Ga)Se2 thin-film solar cells10.1002/pip.2360 ↗
41. Structural and morphological properties of Cu(In,Ga)Se2 thin films on Mo substrate10.1016/j.apsusc.2004.05.207 ↗
42. Intrinsic point defects and complexes in the quaternary kesterite semiconductor Cu2ZnSnS410.1103/PhysRevB.81.245204 ↗