New hybrid graphene/inorganic salt composites for thermochemical energy storage: Synthesis, cyclability investigation and heat exchanger metal corrosion protection performance
Source abstract
Abstract
Abstract Herein, new hybrid thermochemical materials (TCMs) combining MgSO4, MgCl2, and their mixture incorporated into the graphene matrix have been prepared for low to medium temperature heat storage applications. These new hybrid materials were developed to solve agglomeration, cyclability and corrosion issues during hydration/dehydration cycles. The preliminary results of X-Ray diffraction, Raman spectroscopy, and scanning electron microscopy confirmed that the inorganic salts were successfully impregnated into the matrix without providing undesirable reactions. Calorimetric analysis (DSC-TGA) revealed a significant improvement of cycling stability up to 60 hydration/dehydration cycles, and an excellent storage density of 1194.3 J/g and 890 J/g was reached for MgSO4 and MgCl2 composites respectively. In order to protect the heat exchanger metal from the TCMs behaviour, two coating films of polyurethane and polyurethane-graphene have been applied. The scanning electron microscopy showed the good dispersion of graphene into polyurethane film. The electrochemical measurements under storage reactor conditions were examined using conventional methods such as gravimetric tests, polarization techniques and electrochemical impedance spectroscopy (EIS). An inhibition efficiency up to ≈99% for coated metal was reached and suitable corrosion mechanism for uncoated and coated copper was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and Cooling Systems · Thermal Expansion and Ionic Conductivity · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. The effect of renewable energy application on Taiwan buildings: what are the challenges and strategies for solar energy exploitation?10.1016/j.rser.2013.07.018 ↗
2. Thermal energy storage with chemical reactions
3. A comprehensive review of thermal energy storage10.3390/su10010191 ↗
4. Identification of best available thermal energy storage compounds for low-to-moderate temperature storage applications in buildings
5. A systematic multi-step screening of numerous salt hydrates for low temperature thermochemical energy storage10.1016/j.apenergy.2014.02.053 ↗
6. A critical review of thermochemical energy storage systems
7. Prototype thermochemical heat storage with open reactor system10.1016/j.apenergy.2013.01.082 ↗
8. Characterization of salt hydrates for compact seasonal thermochemical storage
9. Study of the reversible water vapour sorption process of MgSO4. 7H2O and MgCl2. 6H2O under the conditions of seasonal solar heat storage
10. Structures of three dehydration products of bischofite from in situ synchrotron powder diffraction data (MgCl2· nH2O; n= 1, 2, 4)10.1107/S0108768107002558 ↗
11. Application of MgCl2· 6H2O for thermochemical seasonal solar heat storage
12. Thermochemical heat storage materials–Performance of mixed salt hydrates10.1016/j.solener.2016.07.016 ↗
13. Hydration and dehydration of salt hydrates and hydroxides for thermal energy storage-kinetics and energy release10.1016/j.egypro.2012.11.043 ↗
14. Characterization of MgSO4 hydrate for thermochemical seasonal heat storage10.1115/1.4000275 ↗
15. Synthesis and characterization of thermochemical storage material combining porous zeolite and inorganic salts10.1080/01457632.2018.1457266 ↗
16. Calorimetric studies of thermochemical heat storage materials based on mixtures of MgSO4 and MgCl210.1016/j.tca.2010.02.009 ↗
17. Composites ‘salt inside porous matrix’for adsorption heat transformation: a current state-of-the-art and new trends10.1093/ijlct/cts050 ↗
18. Sorption composite materials for solar thermal energy storage10.1016/j.egypro.2014.02.111 ↗
19. Development and characterisation of a new MgSO4− zeolite composite for long-term thermal energy storage10.1016/j.solmat.2011.01.050 ↗
20. Sorption and thermal characterization of composite materials based on chlorides for thermal energy storage10.1016/j.apenergy.2015.08.037 ↗
21. Hydrated salts/expanded graphite composite with high thermal conductivity as a shape-stabilized phase change material for thermal energy storage10.1016/j.enconman.2015.05.006 ↗
22. Effect of graphene oxide aerogel on dehydration temperature of graphene oxide aerogel stabilized MgCl2⋅ 6H2O composites10.1016/j.solener.2019.03.076 ↗
23. Facile assembly of cellulose-derived 3D-graphene/lithium hydroxide monohydrate nanocomposite for low-temperature chemical heat storage10.1007/s10570-019-02409-w ↗
24. A facile method to construct graphene oxide–based magnesium hydroxide for chemical heat storage10.1080/15567265.2016.1257673 ↗
25. Corrosion test of salt hydrates and vessel metals for thermochemical energy storage10.1016/j.egypro.2014.02.050 ↗
26. Fernández · 2020
27. Corrosion behaviours of typical metals in molten hydrate salt of Na2HPO4· 12H2O–Na2SO4· 10H2O for thermal energy storage10.1080/1478422X.2019.1595296 ↗
28. Passivity breakdown, pit initiation and propagation of pits in metallic materials–review10.1016/j.corsci.2014.10.006 ↗
29. Effect of chloride and conjoint chloride–sulfate ions on corrosion of reinforcing steel in electrolytic concrete powder solution (ECPS)10.1016/j.conbuildmat.2015.10.028 ↗
30. Evaluation of interaction effect of sulfate and chloride ions on reinforcements in simulated marine environment using electrochemical methods10.20964/2016.08.51 ↗
31. Dependence of critical pitting temperature on the concentration of sulphate ion in chloride-containing solutions10.1016/j.apsusc.2007.03.034 ↗
32. Effects of SO 4 2−, S 2 O 3 2− and HSO 4− ion additives on the pitting corrosion of pure aluminium in 1 M NaCl solution at 40–70° C10.1007/s10008-004-0629-3 ↗
33. Corrosion inhibition mechanism study of a novel yellow metal corrosion inhibitor
34. Silica nanoparticles as copper corrosion inhibitors10.1088/2053-1591/ab2270 ↗
35. Thermophysical properties and corrosion characterization of low cost lithium containing nitrate salts produced in northern Chile for thermal energy storage10.1063/1.4949112 ↗
36. Electrochemical impedance spectroscopy evaluation of corrosion protection of X65 carbon steel by halloysite nanotube-filled epoxy composite coatings in 3.5% NaCl solution10.20964/2019.05.09 ↗
37. Fan · 2019
38. Photocatalytic, corrosion protection and adhesion properties of acrylic nanocomposite coating containing silane treated nano zinc oxide: a combined experimental and simulation study10.1016/j.porgcoat.2019.06.039 ↗
39. The electrolytic ionic strength effect on corrosion resistance and crystallinity of plasma electrolytic oxidation (PEO) coating developed on Ti6Al4V10.1134/S2070205119010143 ↗
40. E. Bovero, G.S. Alabedi, A. Fihri, Hydrophobic Coating for Corrosion Protection and Method of Fabrication, in, Google Patents, 2019.
41. The role of Na-montmorillonite/cobalt ferrite nanoparticles in the corrosion of epoxy coated AA 3105 aluminum alloy10.1016/j.surfin.2019.02.006 ↗
42. Corrosion resistance of graphene-reinforced waterborne epoxy coatings10.1016/j.jmst.2015.12.017 ↗
43. Comparative corrosion resistance of graphene sheets with different structures in waterborne epoxy coatings10.1016/j.colsurfa.2018.08.045 ↗
44. Corrosion inhibition of copper in sodium chloride solution using polyetherimide/graphene composites10.1002/cjce.22439 ↗
45. A brief review of corrosion protective films and coatings based on graphene and graphene oxide10.1016/j.jallcom.2018.06.133 ↗
46. Corrosion inhibition of biomimetic super-hydrophobic electrodeposition coatings on copper substrate10.1016/j.corsci.2015.02.009 ↗
47. Comparison of barrier properties for a superhydrophobic epoxy coating under different simulated corrosion environments10.1016/j.corsci.2015.11.023 ↗
48. Effect of hydrogen peroxide on properties of graphene oxide in Hummers method10.1016/j.carbon.2018.10.009 ↗
49. Hybrid strontium bromide-natural graphite composites for low to medium temperature thermochemical energy storage: formulation, fabrication and performance investigation10.1016/j.enconman.2018.04.031 ↗
50. Copper distribution and oxidation states near corroded fasteners in treated wood10.1007/s42452-019-0249-2 ↗
51. Ni-graphene oxide composite coatings: optimum graphene oxide for enhanced corrosion resistance10.1016/j.compositesb.2019.107145 ↗
52. High surface area porous carbons produced by steam activation of graphene aerogels10.1039/c4ta01387e ↗
53. Role of interlayer spacing and functional group on the hydrogen storage properties of graphene oxide and reduced graphene oxide10.1016/j.ijhydene.2016.04.115 ↗
54. Adsorption of VOCs on reduced graphene oxide10.1016/j.jes.2017.08.022 ↗
55. Characterizing various types of defects in nuclear graphite using Raman scattering: heat treatment, ion irradiation and polishing10.1016/j.carbon.2015.07.095 ↗
56. A Raman spectroscopic investigation of graphite oxide derived graphene10.1063/1.4756995 ↗
57. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
58. Characterization of graphite oxide and reduced graphene oxide obtained from different graphite precursors and oxidized by different methods using Raman spectroscopy10.3390/ma11071050 ↗
59. Synthesis of graphene oxide and reduced graphene oxide by needle platy natural vein graphite10.1016/j.apsusc.2016.10.008 ↗
60. Thermal and mechanical properties of copper-graphite and copper-reduced graphene oxide composites10.1016/j.compositesb.2018.11.004 ↗
61. A hierarchical porous Fe-N impregnated carbon-graphene hybrid for high-performance oxygen reduction reaction10.1016/j.carbon.2018.12.066 ↗
62. Enhancing the heat storage density of silica–alumina by addition of hygroscopic salts (CaCl2, Ba (OH) 2, and LiNO3)10.1016/j.solmat.2015.04.032 ↗
63. Raman spectroscopic study of crystallization from solutions containing MgSO4 and Na2SO4: Raman spectra of double salts10.1021/jp200142n ↗
64. Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application10.1093/ijlct/ctx017 ↗
65. Structure and hydration state characterizations of MgSO4-zeolite 13x composite materials for long-term thermochemical heat storage10.1016/j.solmat.2019.110047 ↗
66. Feasibility study of MgSO4+ zeolite based composite thermochemical energy stores integrated with vacuum flat plate solar thermal collectors for seasonal thermal energy storage
67. Experimental studies for the cyclability of salt hydrates for thermochemical heat storage10.1016/j.est.2015.11.005 ↗
68. Sorption heat storage for long-term low-temperature applications: a review on the advancements at material and prototype scale10.1016/j.apenergy.2016.12.148 ↗
69. Medical-grade PCL based polyurethane system for FDM 3D printing—characterization and fabrication10.3390/ma12060887 ↗
70. Synthesis and properties of castor oil-based waterborne polyurethane/sodium alginate composites with tunable properties10.1016/j.carbpol.2018.12.090 ↗
71. Effect of natural melanin nanoparticles on a self-healing cross-linked polyurethane10.1038/s41428-018-0153-4 ↗
72. A comparison of thermoplastic polyurethane incorporated with graphene oxide and thermally reduced graphene oxide: reduction is not always necessary10.1002/app.47745 ↗
73. Polyurethane nanocomposites containing reduced graphene oxide, FTIR, Raman, and XRD Studies
74. The influence of cerium dioxide functionalized reduced graphene oxide on reducing fire hazards of thermoplastic polyurethane nanocomposites10.1016/j.jcis.2018.10.052 ↗
75. Realizing the flexible and transparent highly-hydrophobic film through siloxane functionalized polyurethane-acrylate micro-pattern10.1016/j.cej.2019.04.197 ↗
76. Preparation of carbon nanotube and polyurethane‐imide hybrid composites by sol–gel reaction10.1002/pc.25193 ↗
77. Thermal degradation behavior and X-ray diffraction studies of chitosan based polyurethane bio-nanocomposites using different diisocyanates10.1016/j.ijbiomac.2018.05.209 ↗
78. Mechanical and thermal conductivity properties of hemp fiber reinforced polyurethane composites10.1016/j.cscm.2018.02.001 ↗
79. Enhanced electrothermal efficiency of flexible graphene fabric Joule heaters with the aid of graphene oxide10.1016/j.matlet.2018.09.078 ↗
80. Preparation and properties of modified graphene oxide incorporated waterborne polyurethane acrylate10.1002/pi.5799 ↗
81. Study on corrosion kinetics of 310H in different simulated MSW combustion environment. The influence of SO2 and H2O on NaCl assisted corrosion10.1016/j.corsci.2019.04.013 ↗
82. Corrosion behaviour of a quenched and partitioned medium carbon steel in 3.5 wt.% NaCl solution10.1016/j.corsci.2017.10.027 ↗
83. Electrochemical characterization of plasma coatings on printed circuit boards10.1016/j.porgcoat.2019.105256 ↗
84. Review on corrosion behavior of copper–brass weldment samples during welding with the different corrosive environment
85. Electrochemical surface oxidation of copper studied by in situ grazing incidence X-ray diffraction10.1021/acs.jpcc.9b00282 ↗
86. Pitting corrosion inhibition of sprinkler copper tubes via forming of Cu-BTA film on the inner surface of corrosion pits
87. In-Situ Raman characterization of initial corrosion behavior of copper in neutral 3.5%(wt.) NaCl solution10.3390/ma12132164 ↗
88. New insights into synthetic copper greens: the search for specific signatures by Raman and infrared spectroscopy for their characterization in medieval artworks10.3390/heritage2020099 ↗
89. Teague · 2018
90. Diktas · 2018
91. Superhydrophobic corrosion inhibition polymer coatings
92. Tan · 2019
93. Electrochemical and chemical corrosion behaviors of the in-situ Zr-based metallic glass matrix composites in chloride-containing solutions10.1016/j.jallcom.2018.08.174 ↗
94. Surface characterization and corrosion behavior of 90/10 copper-nickel alloy in marine environment10.3390/ma12111869 ↗
95. Groysman · 2019 · 261
96. Corrosion of high purity copper in solutions containing NaCl, Na2SO4 and NaHCO3 at different temperatures10.1016/j.mspro.2015.05.017 ↗
97. Electrochemical and structural properties of a polyurethane coating on steel substrates for corrosion protection10.1016/j.corsci.2007.03.018 ↗
98. Effect of SO42− and Cl− anionic attack on the localized corrosion resistance and morphology of 409 ferritic stainless steel10.1016/j.rinp.2018.12.031 ↗
99. Computation of corrosion rates of steel with variation of Cl-, SO4 2-, CO3 2-, HCO3-, O2, CO2, pH and temperature, developed by modeling with artificial neural network, innovations in corrosion and materials science
100. Corrosion polarization behavior and microstructural analysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations10.1080/23311916.2017.1422229 ↗