Heat and mass transportation properties of binary chloride salt as a high-temperature heat storage and transfer media
Source abstract
Abstract
Abstract Molten binary chloride salts are considered as promising heat transfer and storage mediums in a Concentrating Solar Power (CSP) Station. The properties of them over the entire operating temperature are required to be calculated, since they are difficult to be measured under high-temperature conditions. Reliable numerical method is an alternative tool to accurately predict thermal properties of molten salts from the viewpoint of micro-structure. Based on the effective Born-Mayer-Huggins (BMH) pair potential model, the local structures and thermodynamic properties of lithium-potassium chloride were computed by using Molecular Dynamics simulations (MD) and the results are consistent with available experimental literature data. The simulation results prove that BMH force field is reasonable to be adopted to predict the properties of various molten chloride salts and their mixtures. The minimum errors of thermal properties above are all within 11.1%, which is accurate and reliable. The results show that Li+ promotes the diffusion of the system efficiently. In addition, the specific heat capacity and thermal conductivity are significantly improved with the increase of Li+. The database of thermal properties and structures of this work are significant for accurate design of material structure and regulation of thermal storage system performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. A review on solar thermal syngas production via redox pair–based water/carbon dioxide splitting thermochemical cycles10.1016/j.rser.2014.09.039 ↗
2. Concentrated solar power plants: review and design methodology10.1016/j.rser.2013.01.032 ↗
3. Analysis and comparison between a concentrating solar and a photovoltaic power plant10.1016/j.apenergy.2013.07.046 ↗
4. Electrochemistry of MgCl2 in LiCl-KCl eutectic melts10.3866/PKU.WHXB201305102 ↗
5. Solar thermal electric power systems in Japan10.1016/0038-092X(80)90464-8 ↗
6. Screening of high melting point phase change materials (PCM) in solar thermal concentrating technology based on CLFR10.1016/j.solener.2004.04.023 ↗
7. Thermal energy storage using chloride salts and their eutectics10.1016/j.applthermaleng.2016.07.046 ↗
8. Purification of used eutectic (LiCl–KCl) salt electrolyte from pyroprocessing10.1016/j.jnucmat.2013.01.344 ↗
9. A reactive distillation process for the treatment of LiCl-KCl eutectic waste salt containing rare earth chlorides10.1016/j.jnucmat.2016.07.063 ↗
10. Electrochemical study on various types of anode materials in LiCl–KCl eutectic salt used in the electro-winning process10.1007/s10967-012-1894-8 ↗
11. Electrochemical behaviour of dysprosium in the eutectic LiCl-KCl at W and Al electrodes10.1016/j.electacta.2005.07.004 ↗
12. Pulse radiolysis study of transient species in LiCl-KCl melt
13. Williams · 2006
14. Electrochemical studies on the redox mechanism of uranium chloride in molten LiCl-KCl eutectic10.1016/j.electacta.2004.02.002 ↗
15. J. Electrodeposition of magnesium from the eutectic LiCl–KCl melt10.1007/s10800-004-1761-6 ↗
16. Barney · 1980
17. Electrical conductance and density of molten salt systems: KCl-LiCl, KCl-NaCl and KCl-KI10.1021/j150524a007 ↗
18. Heat of fusion, entropy of fusion and cryoscopic constant of the LiCl–KCl eutectic mixture10.1021/j150560a027 ↗
19. Design and thermal properties of a novel ternary chloride eutectics for high-temperature solar energy storage10.1016/j.apenergy.2015.07.022 ↗
20. Thermal conductivities and characteristics of ternary eutectic chloride/expanded graphite thermal energy storage composites10.1016/j.apenergy.2015.03.020 ↗
21. Thermal properties and thermal stability of the ternary eutectic salt NaCl-CaCl2-MgCl2 used in high-temperature thermal energy storage process10.1016/j.apenergy.2017.03.096 ↗
22. Corrosion behavior of Ni-based alloys in molten NaCl-CaCl2-MgCl2 eutectic salt for concentrating solar power10.1016/j.solmat.2017.05.050 ↗
23. Computational investigations of the liquid lithium/(LiCl-KCl eutectic melt) interface10.1016/S0166-1280(97)00323-0 ↗
24. Structural and transport characteristics of UCl3 in molten LiCl-KCl mixture: a molecular dynamics simulation study10.1007/s40242-015-4331-z ↗
25. Molecular dynamics investigation on the local structures and transport properties of uranium ion in LiCl-KCl molten salt10.1016/j.jnucmat.2018.08.052 ↗
26. A Monte Carlo calculation of thermodynamic properties for the liquid NaCl + KCl mixture10.1080/00268977300102671 ↗
27. J. Phys. C., Molten alkali-halide mixtures: a molecular-dynamics study of Li/KCl mixtures10.1088/0022-3719/13/10/009 ↗
28. Chemla effect in molten LiCl/KCl and LiF/KF mixtures10.1021/jp027261a ↗
29. Ionic dynamics in the LiCl–KCl system at liquid state10.1063/1.444192 ↗
30. Molecular dynamics study of the transport properties and local structures of molten binary systems (Li, Na)Cl, (Li, K)Cl and (Na, K)Cl10.1016/j.molliq.2015.06.021 ↗
31. Ion mobilities and microscopic dynamics in liquid (Li, K)Cl10.1063/1.1629076 ↗
32. Molecular simulations of the thermal and transport properties of alkali chloride salts for high-temperature thermal energy storage10.1016/j.ijheatmasstransfer.2016.07.042 ↗
33. Theoretical prediction of the local structures and transport properties of binary alkali chloride salts for concentrating solar power10.1016/j.nanoen.2017.07.020 ↗
34. Ionic sizes and born repulsive parameters in the NaCl-type alkali halides—I: the Huggins-Mayer and Pauling forms10.1016/0022-3697(64)90159-3 ↗
35. Ionic sizes and born repulsive parameters in the NaCl-type alkali halides—II: the generalized Huggins-Mayer form10.1016/0022-3697(64)90160-X ↗
36. Dispersion and polarizability and the van der Waals potential in the alkali halides10.1063/1.1749283 ↗
37. Allen · 1987
38. Application of the molecular dynamics method to a liquid system with long range forces (Molten NaCl)10.1080/00268977400102791 ↗
39. A simple nonequilibrium molecular dynamics method for calculating the thermal conductivity10.1063/1.473271 ↗
40. The shear viscosity of molecular fluids: a calculation by reverse nonequilibrium molecular dynamics10.1063/1.1436124 ↗
41. Molten salts: volume 4, part 2, chlorides and mixtures—electrical conductance, density, viscosity, and surface tension data10.1063/1.555527 ↗
42. Heats of fusion and heat capacities of lithium chloride-potassium chloride eutectic and potassium nitrate10.1021/je60056a023 ↗
43. Selbstdiffusion in geschmolzenem LiCl/self-diffussion in molten LiCl10.1515/zna-1973-0608 ↗
44. Self-diffusion and structure in molten group II Chlorides110.1021/j100889a031 ↗
45. Experimental determination of the thermal diffusivity of molten alkali halides by the forced Rayleigh scattering method. I. Molten LiCl, NaCl, KCl, RbCl, and CsCl10.1007/BF00501941 ↗
46. Thermal conductivity of molten alkali halides from equilibrium molecular dynamics simulations10.1063/1.1691735 ↗