Experimental study on the cycling stability and corrosive property of Al-Si alloys as phase change materials in high-temperature heat storage
Source abstract
Abstract
Abstract Cycling stability and corrosive property of Al-Si alloys with different silicon mass ratios are experimentally investigated for high-temperature latent heat storage purpose, respectively. Melting temperatures, latent heat, thermal diffusivities of Al-Si alloys after 0, 50 and 100 melting-solidification cycles are measured and their thermal conductivities are calculated. Microstructures of Al-Si alloys after 0, 50 and 100 melting-solidification cycles are observed and the relations between thermophysical parameters and microstructures are discussed. Six kinds of common engineering ceramics are adopted to examine the corrosive property of molten Al-Si alloys. The microstructures and element distributions at the interfaces are detected. It is concluded that the microstructures of Al-Si alloys all changes after cycles; the melting temperatures of Al-Si alloys remain relatively stable after cycles, but the variation of latent heat is only found small for AlSi12 alloy and AlSi20 alloy; due to the microstructure variation, the heat transfer performance of Al-Si alloys changes significantly after cycles except AlSi12 alloy; Al2O3 ceramics and AlN ceramics show excellent corrosion resistance in molten Al-Si alloys; the corrosion resistance of SiC ceramics increases with the silicon mass ratio of Al-Si alloys; corrosion exists between Si3N4/ BN/ ZrO2 and Al-Si alloys, which however remains to be studied further.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Thermal properties of materials · Thermodynamic and Structural Properties of Metals and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. 2017
2. Estimating the global waste heat potential10.1016/j.rser.2015.12.192 ↗
3. Topology optimization for heat transfer enhancement in latent heat thermal energy storage10.1016/j.ijheatmasstransfer.2017.05.098 ↗
4. Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite10.1016/j.solmat.2010.09.032 ↗
5. Dynamic tuning of optical absorbers for accelerated solar-thermal energy storage10.1038/s41467-017-01618-w ↗
6. High temperature latent heat thermal energy storage using heat pipes10.1016/j.ijheatmasstransfer.2010.03.035 ↗
7. Cascaded latent heat storage for parabolic trough solar power plants10.1016/j.solener.2006.09.008 ↗
8. Thermal storage in metals
9. Heat storage in eutectic alloys10.1007/BF02653497 ↗
10. New eutectic alloys and their heats of transformation10.1007/BF02814330 ↗
11. GOLDSCHMIDT · 1958
12. Experimental research on a kind of novel high temperature phase change storage heater10.1016/j.enconman.2005.12.004 ↗
13. Aluminum and silicon based phase change materials for high capacity thermal energy storage10.1016/j.applthermaleng.2015.05.037 ↗
14. Cyclic properties of thermal storage/discharge for Al-Si alloy in vacuum for solar thermochemical fuel production10.1016/j.egypro.2015.03.145 ↗
15. Thermal reliability of Al-Si eutectic alloy for thermal energy storage10.1016/j.materresbull.2017.07.040 ↗
16. Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage10.1016/j.apenergy.2016.02.106 ↗
17. Microencapsulation of metal-based phase change material for high-temperature thermal energy storage10.1038/srep09117 ↗
18. Development of a microencapsulated Al–Si phase change material with high-temperature thermal stability and durability over 3000 cycles10.1039/C8TA04708A ↗
19. Nanoconfined phase change materials for thermal energy applications10.1039/C7EE03587J ↗
20. Thermal analysis of Al-Si alloys as high-temperature phase-change material and their corrosion properties with ceramic materials10.1016/j.apenergy.2015.10.164 ↗
21. Specific heat of aluminum from zero to its melting temperature and beyond. Equation for representation of the specific heat of solids10.1021/je60047a035 ↗
22. Thermodynamic properties of iron and silicon10.1063/1.555761 ↗
23. Grain boundaries and dislocations10.1126/science.1071040 ↗
24. Electron mean-free-path calculations using a model dielectric function10.1103/PhysRevB.35.482 ↗
25. Electron effective mean free path and thermal conductivity predictions of metallic thin films10.1063/1.2917454 ↗
26. Broadband phonon mean free path contributions to thermal conductivity measured using frequency domain thermoreflectance10.1038/ncomms2630 ↗
27. Choy · 2015
28. Transactions and communications10.1002/jctb.5000630501 ↗
29. Review Durability of materials in molten aluminum alloys10.1023/A:1004843621542 ↗
30. Standard free energy change of formation per unit volume: a new parameter for evaluating nucleation and growth of oxides, sulphides, carbides and nitrides10.1007/s100190050034 ↗
31. Hydrolysis behavior of aluminum nitride in various solutions10.1023/A:1004718329003 ↗
32. Wettability of aluminum nitride by molten metals10.1007/BF01328834 ↗
33. Degradation of SiC particles in aluminium-based composites10.1007/BF01151086 ↗
34. Berry · 1938
35. Prediction of Si contents to suppress the interfacial reaction in the SiCp 2014 Al composite10.1016/S1359-6454(97)00465-5 ↗
36. Formation of an interfacial AlN layer in an Al/Si3N4thin‐film system10.1063/1.101418 ↗
37. BN/Al composite formation by high-energy ball milling10.1016/S1359-6462(96)00335-1 ↗
38. Structural evolution of Al/BN mixture during mechanical alloying10.1016/j.jallcom.2005.03.087 ↗
39. Tensile properties and microstructures of Al composite reinforced with BN particles10.1016/S1359-835X(02)00011-8 ↗
40. Investigation of interaction of metal melts and zirconia10.1007/s10853-005-1928-5 ↗
41. Reactive synthesis of in-situ ZrAl3-Al2O3-Al composites10.1007/s11661-003-0247-1 ↗