Transition metal based CuxNiyCoz-x-yO4 spinel composite solar selective absorber coatings for concentrated solar thermal applications
Source abstract
Abstract
Abstract Solar selective absorber coatings, combining of nanostructured, ternary transition metal spinel structure and composite oxides were prepared by a series of transition metal (Co, Ni and Cu) based nitrate salts. A single-layered structure of crystalline phase spinel-type oxide AB2O4 in the framework of simple wet chemical route and dip coating method was prepared in the crystalline structure of CuxNiyCoz-x-yO4. The X-ray diffraction profile of the oxide film was found to coincide with that of crystalline [Cu2+0.31Co3+0.16Co2+0.53]A[Cu2+0.17Ni3+0.16Co3+1.67]BO4 in the ICDD database. Precursor salts were heated at a particular temperature to form hydroxy nitrate solution followed by suitable solvent with different binders to form adherent sol for dip coating technique. By optimizing sol concentration, withdrawal speed and annealing temperature, uniform absorber layer with solar absorptance of 0.91 and emittance of 0.14 were achieved in a single layer coating with a composite oxide formation. The optical, structural and morphological properties of the optimized coatings of single layer CuxNiyCoz-x-yO4 spinel and composite oxide have been characterized by UV–Vis–NIR spectrophotometer, emissometer, X-ray diffraction, field emission - scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. A review of solar photovoltaic technologies10.1016/j.rser.2010.11.032 ↗
2. A review of solar parabolic trough collector10.1016/j.rser.2015.10.043 ↗
3. Review of Mid- to high- temperature solar selective absorber
4. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
5. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
6. Design of particles by spray pyrolysis and recent progress in its application10.1007/s11814-010-0402-5 ↗
7. Fundamentals of sol-gel dip coating10.1016/0040-6090(91)90158-T ↗
8. A highly thermally stable Mn-Cu-Fe composite oxide based solar selective absorber layer with low thermal loss at high temperature10.1016/j.jallcom.2015.05.038 ↗
9. Solar absorber coatings based on CoCuMnOx spinels prepared via the sol-gel process: structural and optical properties10.1016/S0927-0248(02)00457-9 ↗
10. Structural and IR spectroscopic analysis of sol-gel processed CuFeMnO4spinel and CuFeMnO4/silica films for solar absorbers10.1023/A:1008728717617 ↗
11. Novel black selective coating for tubular solar absorbers based on a sol-gel method10.1016/j.solener.2013.05.009 ↗
12. Cu1.5Mn1.5O4-based ceramic spectrally selective coatings for efficient solar absorber applications10.1016/j.jallcom.2016.03.081 ↗
13. Zirconia nanoparticles embedded spinel selective absorber coating for high performance in open atmospheric condition10.1016/j.solmat.2017.09.032 ↗
14. Optical, electrical and magnetic properties of Co3O4 nanocrystallites obtained by thermal decomposition of sol-gel derived oxalates10.1016/j.mseb.2009.06.002 ↗
15. Anti-reflection coatings for solution-chemically derived nickel-alumina solar absorbers10.1016/j.solmat.2003.12.015 ↗
16. Effect of annealing temperature on the structural, morphological, optical and electrical properties of Co3O4 thin film by nebulizer spray pyrolysis technique10.1007/s10854-015-4234-2 ↗
17. Optical investigation of charge-transfer transitions in spinel Co3O410.1016/S0038-1098(03)00373-9 ↗
18. Computations of the optical properties of metal/insulator-composites for solar selective absorbers10.1016/S0960-1481(02)00033-2 ↗
19. Synthesis and cation distribution of the spinel cobaltites CuxMyCo3-(x+y)O4 (M = Ni, Zn) obtained by pyrolysis of layered hydroxide nitrate solid solutions10.1021/cm990331e ↗
20. Determination of the Cu 2p primary excitation spectra for Cu, Cu2O and CuO10.1016/j.susc.2013.10.009 ↗
21. Cu/TiO2 thin films prepared by reactive RF magnetron sputtering10.1007/s00339-015-9254-5 ↗
22. Spectroscopic studies of Nickel (II) and nickel (III) species generated upon thermal treatments of nickel/ceria-supported materials
23. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
24. XPS characterisation of catalysts during production of multiwalled carbon nanotubes10.1039/b007279f ↗
25. Controlled cobalt oxide from two-dimensional films to one-dimensional nanorods and zero-dimensional nanoparticles: morphology-dependent optical carbon monoxide gas-sensing properties10.1021/jp905715g ↗
26. Bipolar resistive switching in p-type Co3O4 nanosheets prepared by electrochemical deposition10.1186/1556-276X-8-36 ↗