journal article·2017-02

Synthesis, characterization and thermal performance of Fe/N co-doped MgTiO3 as a novel high near-infrared reflective pigment

Rui Yang, Aijun Han, Mingquan Ye, Xingxing Chen, Lin Yuan

Publisher page

Abstract

Abstract To obtain cool materials as inorganic and nontoxic pigments with high near-infrared reflectance, nano-powder of Fe/N co-doped MgTiO 3 (FNM), were synthesized by the sol-gel method. The substitution of Fe/N changed the color from white to dark-red due to the point defect equilibrium theory, while the band gap decreased from 2.11 ev to 1.89 ev. Ammonolysis reaction can promote the particle dispersion and increase the particle size. Furthermore, the FNM pigments exhibit high NIR reflectance (>65%) and the NIR solar reflectance (>53.51%) in the range of 700–2500 nm. After the prepared pigments (N-doped Mg 1−x Fe x TiO 3+δ , x=0.3) and conventional brown pigments used as building roof materials, the temperature difference of coatings could reach 2.4 °C (the inner surface temperature of substrate plates) and 2.0 °C (the interior temperature of the two boxes), respectively. Moreover, the surface temperature distribution of the coatings was recorded by infrared images and the difference (ΔT) varied at 0–12 °C. According to the maximum value of coatings (x=0.3), energy savings would reduce annual emissions of 1379.35 t carbon dioxide, 41.65 t nitrogen oxides and 34.30 t sulfur oxides. Owing to the wide range of color and good chemical stability, which meets reflectance of solar radiation energy and cooling energy needs, these FNM materials are considered as novel color pigments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pigment Synthesis and Properties · Transition Metal Oxide Nanomaterials · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The development and validation of a thermal model for the cabin of a vehicle10.1016/j.applthermaleng.2014.02.054 ↗
2. A v-shaped cavity camouflage coating10.1016/j.optlastec.2012.05.014 ↗
3. Ultraviolet light-emitting diodes based on group three nitrides10.1038/nphoton.2007.293 ↗
4. Inorganic pigments based on fluorite-type oxynitrides10.1557/jmr.2006.0177 ↗
5. The vast colour spectrum of ternary metal oxynitride pigments10.1016/j.dyepig.2006.08.029 ↗
6. Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions10.1016/j.solener.2010.12.023 ↗
7. On the development, optical properties and thermal performance of cool colored coatings for the urban environment10.1016/j.solener.2006.08.005 ↗
8. Surface heat budget on green roof and high reflection roof for mitigation of urban heat island10.1016/j.buildenv.2006.06.017 ↗
9. Cool colored roofs to save energy and improve air quality
10. Near-infrared reflectance properties of perylene derivatives10.1016/j.dyepig.2011.06.011 ↗
11. Cool black roof impacts into the cooling and heating load demand of a residential building in various climates10.1016/j.solmat.2016.03.023 ↗
12. Inorganic yellow-red pigments without toxic metals10.1038/35010082 ↗
13. The stability of textile azo dyes in soil and their impact on microbial phospholipid fatty acid profiles10.1016/j.ecoenv.2015.06.004 ↗
14. Effect of salinity on metal-complex dye biosorption by Rhizopus arrhizus10.1016/j.jenvman.2010.02.026 ↗
15. Synthesis and characterization of inorganic pigments based on transition metal oxynitrides10.1557/jmr.2006.0272 ↗
16. Preparation and characterization of Fe3+ doped Y2Ce2O7 pigments with high near-infrared reflectance10.1016/j.solener.2013.08.007 ↗
17. Solar spectral optical properties of pigments Part I: model for deriving scattering and absorption coefficients from transmittance and reflectance measurements10.1016/j.solmat.2004.11.012 ↗
18. Solar spectral optical properties of pigments Part II: survey of common colorants10.1016/j.solmat.2004.11.013 ↗
19. Near infrared reflectance properties of metal oxide nanoparticles10.1021/jp066363o ↗
20. Highly solar radiation reflective Cr2O3-3TiO2 orange nanopigment prepared by a polymer-pyrolysis method10.1021/sc400363b ↗
21. Comparison between aesthetic and thermal performances of copper oxide and titanium dioxide nano-particulate coatings10.1016/j.jqsrt.2010.08.032 ↗
22. Colored cool colorants based on rare earth metal ions10.1016/j.solmat.2008.06.008 ↗
23. Brilliant yellow color and enhanced NIR reflectance of monoclinic BiVO4 through distortion in VO43− tetrahedra10.1016/j.solmat.2013.01.022 ↗
24. Hierarchically porous monoliths based on N-doped reduced titanium oxides and their electric and electrochemical properties10.1021/cm401933a ↗
25. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics10.1111/j.1551-2916.2010.03876.x ↗
26. Synthesis of nanocrystalline magnesium titanate by an auto-igniting combustion technique and its structural, spectroscopic and dielectric properties10.1016/j.materresbull.2010.03.019 ↗
27. ASTM G159-98 · 1998
28. CIE. Recommendations on Uniform Colour Spaces, Colour Difference Equations, Psychometrics Colour Terms. Supplement No. 2 of CIE Publ. No. 715 (E1-131)1971, Bureau Central de la CIE, Paris, 1978.10.1002/j.1520-6378.1977.tb00102.x ↗
29. Lanthanume-strontium copper silicates as intense blue inorganic pigments with high near-infrared reflectance10.1016/j.dyepig.2013.04.013 ↗
30. Smart optically active VO2 nanostructured layers applied in roof-type ceramic tiles for energy efficiency10.1016/j.solmat.2016.02.001 ↗
31. Optical properties of the perovskite solid solution LaTiO2N–ATiO3 (A=Sr, Ba)10.1002/ejic.200500743 ↗
32. Carbon quantum dots decorated N-doped ZnO: synthesis and enhanced photocatalytic activity on UV, visible and daylight sources with suppressed photocorrosion10.1016/j.jece.2015.06.029 ↗
33. Preparation of a La/N co-doped TiO2 film electrode with visible light response and its photoelectrocatalytic activity on a Ni substrate10.1016/j.dyepig.2015.10.044 ↗
34. Thermal oxidation of oxynitride perovskites in different atmospheres10.1016/j.tca.2008.02.021 ↗
35. Ross · 1972
36. Multiferroic magnetoelectric composites: historical perspective, status, and future directions10.1063/1.2836410 ↗
37. Investigations of the electronic structure of d0 transition metal oxides belonging to the perovskite family10.1016/S0022-4596(03)00289-5 ↗
38. Fox · 2001
39. S. Maruyama, Light Energy Engineering, Yokendo, Tokyo, 2004.
40. Sole · 2005
41. H. Akbari, A. Desjarlais. Cooling down the house: residential roofing products soon will boast "cool" surfaces, Professional Roofing, March 2005, pp. 32–38
42. Cooler tile-roofed buildings with near-infrared-reflective non-white coatings10.1016/j.buildenv.2006.06.005 ↗
43. Sol-gel synthesis, characterization and luminescence properties of SrMgAl2SiO7: eu2+ as a novel nanocrystalline phosphor10.1002/bio.1251 ↗