journal article·2011-03

Nitrogen doped amorphous chromium oxide: Stability improvement and application for the hole-transporting layer of organic solar cells

Pingli Qin, Guojia Fang, Qin He, Nanhai Sun, Xi Fan, Qiao Zheng, Fei Chen, Jiawei Wan, Xingzhong Zhao

Publisher page

Abstract

Abstract Efficient organic solar cells (OSCs) based on the blends of poly(3-hexylthiophene): fullerene derivative [6,6]-phenyl-C61 butyric acid methyl ester composites have been fabricated on fluorine-doped tin oxide coated glass substrates using the sputtered nitrogen doped amorphous chromium oxide (NACO) film as a hole-transporting layer (HTL). Optimized parameters for p-type NACO layer fabrication have been obtained through argon/oxygen/nitrogen flow ratio variations. Based on the HTL, the power conversion efficiency up to 3.17% has been achieved. With the help of X-ray photoelectron spectroscopy and Hall-effect measurements, we come to a conclusion that CrN in amorphous chromium oxide (ACO) film could prevent water dissociation and hydroxylation at defect sites on the ACO film surface, and reduce the electrical resistivity of films. The stability of NACO as HTL has been improved compared with that of ACO as HTL, which can improve the performance of OSC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
2. Solubility-driven thin film structures of regioregular poly (3-hexyl thiophene) using volatile solvents10.1063/1.2734387 ↗
3. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
4. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
5. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
6. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
7. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
8. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
9. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
10. Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering10.1016/j.apsusc.2008.08.057 ↗
11. 1994
12. Computer simulation studies of perfect and defective surfaces in Cr2O310.1111/j.1151-2916.1988.tb06401.x ↗
13. The crystal structure of chromium trioxide10.3891/acta.chem.scand.04-1131 ↗
14. CrO2—a new half-metallic ferromagnet?10.1103/PhysRevLett.59.2788 ↗
15. Production and magnetotransport properties of CrO2 films10.1063/1.364682 ↗
16. Chromia supported on titania: V. Preparation and characterization of supported CrO2, CrOOH, and Cr2O310.1006/jcat.1995.1295 ↗
17. Interconversion of CrO2 formed by decomposition of chromium(III) nitrate nonahydrate10.1016/0022-4596(95)80004-9 ↗
18. Growth of the Cr oxides via activated oxygen reactive molecular beam epitaxy: comparison of the Mo and W oxides10.1063/1.1355286 ↗
19. P. Qin, G. Fang, N. Sun, X. Fan, Q. Zheng, F. Chen, X. Zhao. P-type amorphous chromium oxide thin films by reactive magnetron sputtering applied for organic solar cell as hole-transporting layer, Thin Solid Films, accepted for publication.
20. Hydroxylation of ultra-thin films of a-Cr2O3 (0001) formed on Cr (110)10.1016/S0039-6028(00)00880-3 ↗
21. Characterization of sputter-deposited chromium nitride thin films for hard coatings10.1016/S0257-8972(97)00443-X ↗
22. Band gap in epitaxial NaCl-structure CrN(001) layers10.1063/1.1466528 ↗
23. Patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
24. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
25. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
26. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
27. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
28. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
29. XPS, LEED and STM study of thin oxide films formed on Cr (110)10.1016/S0039-6028(00)00439-8 ↗
30. 1979
31. An X-ray photoelectron spectroscopic study of some chromium–oxygen systems10.1002/sia.740130210 ↗
32. The X-ray photo-electron spectra of several oxides of iron and chromium10.1016/S0010-938X(77)80002-4 ↗
33. Characterization of water exposed plasma sprayed oxide coating materials using XPS10.1016/j.apsusc.2008.03.168 ↗
34. Pankove · 1971
35. XPS study of the interaction of water with the a-Cr2O3(001) surface10.1016/S0039-6028(99)01246-7 ↗
36. Hydroxyl groups on oxide surface: NiO (100), NiO (111) and Cr2O3 (111)10.1016/0301-0104(93)80031-4 ↗
37. Embedded cluster study of water adsorption at Cr2O3(0001)10.1016/S0039-6028(97)00913-8 ↗
38. Influence of nitrogen content on the structural, electrical and mechanical properties of CrNX thin films10.1016/j.msea.2007.01.149 ↗