journal article·2020-08

Evolutionary PERC+ solar cell efficiency projection towards 24% evaluating shadow-mask-deposited poly-Si fingers below the Ag front contact as next improvement step

Thorsten Dullweber, Maximilian Stöhr, Christian Kruse, Felix Haase, Martin Rudolph, Birgit Beier, Philip Jäger, Verena Mertens, Robby Peibst, Rolf Brendel

Publisher page

Abstract

Abstract Monofacial PERC and bifacial PERC + solar cells have become the mainstream solar cell technology exhibiting conversion efficiencies around 22.5% in mass production. We determine a specific saturation current density J0,Ag = 1400 fA/cm2 of the screen-printed Ag front contact. When weighted with the contact area fraction of 3.0% the Ag metal contacts contribute 42 fA/cm2 to the total J0,total = 130 fA/cm2 thereby being a main limitation of the Voc. We investigate carrier selective poly-Si on oxide (POLO) fingers below the screen-printed Ag contacts of PERC + solar cells in order to minimize contact recombination. We name this solar cell PERC + POLO. Numerical simulations reveal that PERC + POLO cells exhibit an efficiency potential up to 24.1% which is 0.3%abs. higher compared to PERC + solar cells. In order to enable low-cost manufacturing of poly-Si fingers, we investigate for the first time the deposition of suitable a-Si fingers by plasma-enhanced chemical vapour deposition (PECVD) through a shadow mask in a vacuum chamber. We demonstrate a-Si fingers as narrow as 70 μm and as high as 250 nm. The parasitic deposition below the mask increases the a-Si finger width by less than 30 μm compared to the mask opening width. First test wafers demonstrate an implied Voc up to 716 mV of PECVD a-Si layers which are crystalized and doped in a subsequent POCl3 diffusion. Applying this process sequence, PERC + POLO cells could be manufactured with the established industrial PERC + process only adding the PECVD deposition of a-Si fingers through a shadow mask.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. PERC+: industrial PERC solar cells with rear Al grid enabling bifaciality and reduced Al paste consumption10.1002/pip.2712 ↗
2. Exceeding 23% and mass production of p-Cz Quantum bifacial solar cells
3. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
4. 18.9% efficient full area laser doped silicon solar cell10.1063/1.3232208 ↗
5. Key aspects for fabrication of p-type Cz-Si PERC solar cells exceeding 22% conversion efficiency
6. Recent progress and options for future crystalline silicon solar cells
7. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
8. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
9. Large area TOPCon cells realized by a PECVD tube process
10. Approaching 23% with large‐area monoPoly cells using screen‐printed and fired rear passivating contacts fabricated by inline PECVD10.1002/pip.3097 ↗
11. Deng · 2019 · 259
12. Jin · 2018
13. The roadmap to > 24% of PERC
15. Novel method for preparation of interdigitated back contacted a-Si:H/c-Si heterojunction solar cells
16. Optimization of tunnel-junction IBC solar cells based on a series resistance model10.1016/j.solmat.2019.110036 ↗
17. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
18. PERC+POLO solar cells minimizing carrier recombination at the Ag front contact with simulated efficiency potential up to 23.8%
19. 2018
20. High efficiency industrial PERC solar cells for monofacial and bifacial applications
21. Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells10.1002/pip.1198 ↗
22. Void formation in screen-printed local aluminum contacts modeled by surface energy minimization10.1016/j.solmat.2016.06.039 ↗
23. Industrial screen-printed n-PERT-RJ solar cells: efficiencies beyond 22% and open-circuit voltages approaching 700 mV10.1109/JPHOTOV.2019.2919117 ↗
24. Fine line Al printing on narrow point contact opening for front side metallization10.1063/1.5123846 ↗
25. Impact of the rear surface roughness on industrial-type PERC solar cells
26. Status of selective emitter technology
27. Ion-implanted PERC solar cells with Al2O3/SiNx rear passivation10.1016/j.egypro.2013.07.300 ↗
28. 22.61% efficient fully screen printed PERC solar cell
29. Impact of the thermal budget of the emitter formation on the pFF of PERC+ solar cells10.1063/1.5123892 ↗
30. Simplified front surface field formation for back contacted silicon solar cells10.1016/j.egypro.2013.07.278 ↗
31. Low pressure diffusions for high quality emitter formation in advanced p- and n-type solar cells
32. Emitter saturation current densities of 22 fA/cm2 applied to industrial PERC solar cells approaching 22% conversion efficiency10.1002/pip.2806 ↗
33. Surface recombination velocity of highly doped n-type silicon10.1063/1.363250 ↗
34. Screen printed thick film metallization of silicon solar cells – recent developments and future perspectives
35. The multi-busbar design: an overview10.1016/j.egypro.2013.11.092 ↗
36. Analysis of the emitter saturation current density of industrial type silver screen-printed front contacts
37. 22.13% efficient industrial p-type mono PERC solar cell
38. Impact of the phosphorus emitter doping profile on metal contact recombination of silicon wafer solar cells10.1016/j.solmat.2015.12.006 ↗
39. Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts10.1016/j.solmat.2018.12.026 ↗
40. Silicon wafer material options for highly efficient p-type PERC solar cells Proc
41. LID-free PERC+ cells with stable efficiencies up to 22.1%
42. Industrial silicon solar cells applying the Passivated Emitter and Rear Cell (PERC) concept—a review10.1109/JPHOTOV.2016.2571627 ↗
43. Present status and future perspectives of bifacial PERC+ solar cells and modules10.7567/JJAP.57.08RA01 ↗
44. Modeling solar cells with the dopant‐diffused layers treated as conductive boundaries10.1002/pip.954 ↗
45. A free and fast three-dimensional/two-dimensional solar cell simulator featuring conductive boundary and quasi-neutrality approximations10.1109/TED.2012.2231415 ↗
46. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions10.1016/j.egypro.2016.07.057 ↗
47. Increasing the photo‐generated current in solar cells with passivating contacts by reducing the poly‐Si deposition temperature10.1063/1.5049278 ↗
48. Inductively coupled plasma chemical vapour deposited AlOx/SiNy layer stacks for applications in high-efficiency industrial-type silicon solar cells10.1016/j.solmat.2013.01.036 ↗
49. Singular – a novel static inline PECVD-deposition concept for silicon cell production
50. For none, one, or two polarities—how do POLO junctions fit best into industrial Si solar cells?