How the amount of copper influences the formation and stability of defects in CdTe solar cells
Source abstract
Abstract
With a 22.1% efficiency record and the successful results in terms of production yield, CdTe based thin film solar cells are today a competing technology with traditional silicon solar cells. Despite different copper-free back contacts have been applied, Cu is present in all the most performing CdTe devices. On the other hand, it is well known that Cu is a fast diffuser in CdTe, and it heavily influences the devices degradation; thus controlling its concentration is very important. In this paper a study of the influence of copper quantity on the performance of the devices and stability at the back contact is presented. CdTe cells fabricated with a 0.1 nm thick Cu layer are compared to devices fabricated with 2.0, 1.0 and 0.5 nm thick Cu layers. The amount of copper affects the performance and aging of the samples. Moreover an inversion of the bias dependency (solar cells in open circuit or in short circuit under current flow), during the aging, occurs in samples containing a copper layer below a certain thickness, suggesting that another degradation mechanism predominates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Silicon and Solar Cell Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Krum · 2016 · 1
2. First solar achieves world record 18.6 % thin film module conversion efficiency, (n.d.). http://investor.firstsolar.com/releasedetail.cfm?ReleaseID=917926.
3. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
4. Structural and compositional dependence of the CdTe x Se 1-x alloy layer photoactivity in CdTe-based solar cells
5. Co-sublimation of CdSexTe1−xlayers for CdTe solar cells10.1016/j.solmat.2016.09.025 ↗
6. Development of Cu‐doped ZnTe as a back‐contact interface layer for thin‐film CdS/CdTe solar cells10.1116/1.580394 ↗
7. A photoemission determination of the band diagram of the Te/CdTe interface10.1063/1.359444 ↗
8. CdS/CdTe solar cells with MoOx as back contact buffers10.1063/1.3489414 ↗
9. Copper inclusion and migration from the back contact in CdTe solar cells
10. Copper migration in CdTe heterojunction solar cells10.1007/BF02659909 ↗
11. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil10.1038/ncomms3306 ↗
12. Properties of ZnTe:Cu thin films and CdS/CdTe/ZnTe solar cells
13. The roles of Cu impurity states in CdTe thin film solar cells
14. Study of thin film poly-crystalline CdTe solar cells presenting high acceptor concentrations achieved by in-situ arsenic doping10.1016/j.solmat.2019.02.025 ↗
15. Stability of CdTe solar cells at elevated temperatures: bias, temperature, and Cu dependence10.1063/1.57895 ↗
16. Optimization of processing and modeling issues for thin film solar cell devices including concepts for the development of polycrystalline multijunctions
17. Analysis of stress-induced degradation in CdS/CdTe solar cells
18. Junction spectroscopy techniques and deep-level defects in semiconductors10.1063/1.5011327 ↗
19. Weiss · 1988
20. Improved stability of CdTe solar cells by absorber surface etching10.1016/j.solmat.2016.12.044 ↗
21. Photoluminescence study of Cu diffusion and electromigration in CdTe10.1063/1.124375 ↗
22. Stability of CdTe/CdS thin-film solar cells10.1016/S0927-0248(00)00014-3 ↗
23. Approach toward high efficiency CdTe/CdS heterojunction solar cells10.1016/0254-0584(95)01626-6 ↗
24. An innovative process suitable to produce high-efficiency CdTe/CdS thin-film modules10.1016/j.solmat.2009.06.001 ↗
25. Romeo · 2013 · 1178
26. Formation Of ZnTe: Cu/Ti contacts at high temperature for CdS/CdTe devices
27. Phase control of CuxTe film and its effects on CdS/CdTe solar cell10.1016/j.tsf.2006.12.151 ↗
28. Analysis of a novel CuCl 2 back contact process for improved stability in CdTe solar cells
29. Theoretical analysis of effects of deep level, back contact, and absorber thickness on capacitance-voltage profiling of CdTe thin-film solar cells10.1016/j.solmat.2012.01.003 ↗
30. J.T. Heath, J.D. Cohen, W.N. Shafarman, Bulk and Metastable Defects in CuIn 1Àx Ga X Se 2 Thin Films Using Drive-Level Capacitance Profiling, (n.d.). doi:10.1063/1.1633982͔.10.1063/1.1633982 ↗
31. Characterization of CdS/CdTe thin-film solar cells by admittance spectroscopy and deep-level transient spectroscopy10.1063/1.333917 ↗
32. Back contact formation in thin cadmium telluride solar cells10.1016/j.tsf.2010.12.144 ↗
33. A comprehensive picture of Cu doping in CdTe solar cells10.1063/1.4828484 ↗
34. Effect of copassivation of Cl and Cu on CdTe grain boundaries10.1103/PhysRevLett.101.155501 ↗
35. TEM study of locations of Cu in CdTe solar cells10.1557/PROC-1012-Y04-09 ↗
36. Deep-level impurities in CdTe/CdS thin-film solar cells10.1063/1.1326465 ↗
37. Copper impurity behaviour in CdTe films10.1002/pssa.2210590112 ↗
38. Role of copper in the performance of CdS/CdTe solar cells
39. Cu profiles in CdTe solar cells
40. Electrical characterization of Cu composition effects in CdS/CdTe thin-film solar cells with a ZnTe: Cu back contact preprint10.1109/JPHOTOV.2013.2257919 ↗
41. Carrier density and compensation in semiconductors with multi dopants and multi transition energy levels: the case of Cu impurity in CdTe
42. Trefny · 1999
43. New perspective on the performance stability of CdTe solar cells10.1016/j.solmat.2015.11.017 ↗
44. Photoluminescence of Cu-doped CdTe and related stability issues in CdS/CdTe solar cells10.1063/1.1287414 ↗
45. Optical study of complex formation in Ag-doped CdTe10.1103/PhysRevB.33.1134 ↗