Materials selection for thermal energy storage systems in parabolic trough collector solar facilities using high chloride content nitrate salts
Source abstract
Abstract
The increasing role of concentrated solar power (CSP) within the renewable energy portfolio is attributed to the possibility of integrating thermal energy storage (TES) systems. Then, CSP technology has become one of the most interesting clean options to deliver dispatchable power on demand. Nowadays, commercial facilities use high quality solar salts (60%:40% NaNO3 and KNO3 by weight) as storage medium due to the attractive properties of this fluid to be applied under CSP operation conditions. Taking into account that CSP installations are designed with really large TES systems containing tens of thousands of tons, the use of lower quality nitrates salts would reduce the molten salts inventory cost and finally the investment cost of the CSP storage systems at commercial scale. The most important drawback of selecting low quality nitrates salts for high temperature CSP applications is the corrosion impact produced by impurities. Accordingly, chlorides have been identified in the state of the art as the impurity with higher effect over corrosion. This work is focused on A516 Gr70 carbon steel corrosion performance evaluation under high-chlorides content nitrates salts (1.2% and 3% by weight) at 400 °C. In addition, the feasibility of using the proposed low purity mixtures with current CSP facilities materials selection is analyzed. Results reported within this study show the critical effect of chloride content over corrosion mechanism producing lack of adherence between base metal and oxides layers in addition to corrosion products delamination and internal cracking. Then, the use of A516 Gr70 carbon steel is rejected for a long term design under solar salts containing chlorides content in the range 1.2–3% by weight being necessary a higher corrosion resistant materials selection. An improved materials selection focused on higher corrosion resistance alloys is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Phase Change Materials Research · Solar Energy Systems and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Medium-term renewable energy market report, International Energy Agency (IEA), 2015.
2. Technology roadmap Solar Thermal ElectricityInternational Energy Agency (IEA), 2014.
3. State-of-the-art of solar thermal power plants: a review10.1016/j.rser.2013.06.037 ↗
4. Concentrated solar power plants: review and design methodology10.1016/j.rser.2013.01.032 ↗
5. State of the art on high temperature thermal energy storage for power generation. Part 1 – Concepts, materials and modelization10.1016/j.rser.2009.07.035 ↗
6. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
7. Key performance indicators in thermal energy storage: survey and assessment10.1016/j.renene.2015.05.019 ↗
8. Review on sustainable thermal energy storage technologies, part I: heat storage materials and techniques10.1016/S0196-8904(98)00025-9 ↗
9. Assessment of a molten salt heat transfer fluid in a parabolic trough solar field10.1115/1.1565087 ↗
10. Two-tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
11. L. Sena-Henderson, Advantages of using molten salts, SANDIA National Laboratories, 2006.
12. The thermal stability of molten nitrite/nitrates salt for solar thermal energy storage in different atmospheres10.1016/j.solener.2012.05.025 ↗
13. Engineering aspects of a molten salt heat transfer fluid in a trough solar field10.1016/S0360-5442(03)00191-9 ↗
14. Horsman · 1983 · vol. 7
15. Lay · 2007
16. Electrochemistry of the oxygen electrode in the KNO3-KO2 system, a comparative study10.1016/0013-4686(77)85121-9 ↗
17. Cyclic voltammetric behaviour of platinum in dried and wet nitrates melt10.1016/0013-4686(93)80159-W ↗
18. A chronopotentiometric study of the stability of oxide ion in molten nitrates10.1016/0013-4686(71)85135-6 ↗
19. Abengoa solar website, Solana Generation Station description (accessed 18.05.16)
20. The effects of chlorides, hydrogen chloride, and sulfur dioxide in the oxidation of steels below deposits10.1016/0010-938X(95)00011-8 ↗
21. H. Goods H, R. Bradshaw, M. Prairie, J. Chavez, Corrosion of stainless steels and carbon steels in molten mixtures of industrial nitrates (SAND 94-8211), SANDIA National laboratories, 1994.10.2172/10141843 ↗
22. R.W. Bradshaw, W.M. Clift, Effect of chloride content of molten nitrate salt on corrosion of A516 carbon steel (SAND 2010–7594), SANDIA National Laboratories, 2010.10.2172/1002088 ↗
23. ASM Handbook Volume 13A, Corrosion: Fundamentals, Testing, and Protection (ASM International). Corrosion by Molten Nitrates, Nitrites, and Fluorides, 2003, pp. 124–128.10.31399/asm.hb.v13a.a0003587 ↗
24. Effects of halides on the corrosion of mild steel in molten NaNO3-KNO3 eutectic10.1179/000705976798319702 ↗
25. Crevice corrosion of Q235 carbon steels in a solution of NaHCO3 and NaCl10.1016/j.corsci.2010.01.006 ↗
26. Crevice corrosion behavior of A516-70 carbon steel in solutions containing inhibitors and chloride ions10.1016/S0040-6090(98)00517-3 ↗
27. The influence of ppb levels of chloride impurities on the stain-induced corrosion cracking and corrosion fatigue crack growth behavior of low-alloy steels under simulated boling water reactor conditions10.1016/j.corsci.2016.03.010 ↗
28. Effect of chloride on stress corrosion cracking susceptibility of carbon steel in simulated fuel grade ethanol10.1016/j.electacta.2013.04.112 ↗
29. Corrosion testing device for in-situ corrosion characterization in operational molten salts storage tanks: A516 Gr70 carbon steel performance under molten salts exposure10.1016/j.solmat.2016.06.005 ↗
30. The phase diagram of NaNO3–KNO310.1016/0040-6031(80)85085-4 ↗
31. ASME Boiler and pressure vessel code. Section II a: Ferrous Material Specifications, ASME, 1998.
32. Corrosion behavior of reheated CGHAZ of X80 pipeline steel in H2S-containing environments10.1016/j.matdes.2016.03.036 ↗
33. Electrochemical behavior of the simulated heat-affected zone of A516 carbon steel in H2S solution10.1016/0013-4686(95)00470-X ↗
34. The effect of NaCl addition on the corrosion of mild steel in NaNO3 melt10.1016/0010-938X(93)90045-I ↗
35. Sastri · 2007
36. Selection of materials with potential in sensible thermal energy storage10.1016/j.solmat.2010.05.035 ↗
37. Multi-objective material selection for wind turbine blade and tower: ashby's approach10.1016/j.matdes.2011.12.048 ↗
38. Materials selection for bipolar plates for polymer electrolyte membrane fuel cells using the Ashby approach10.1016/j.jpowsour.2012.01.104 ↗
39. Material selection for microelectronic heat sinks: an application of the Ashby approach10.1016/j.matdes.2009.07.013 ↗
40. Ashby · 2010 · 203
41. The characteristics of microcrack initiation process in cast iron materials under thermal shock test10.1016/j.msea.2014.05.012 ↗
42. Roberts · 1998
43. Davis · 2001
44. Effect of Ni content on the corrosion behavior of Cu–Ni alloys in neutral chloride solutions10.1016/j.electacta.2004.12.030 ↗
45. Influence of chromium and molybdenum on the corrosion of nickel-based alloys10.5006/1.3279907 ↗
46. The effect of molybdenum on the corrosion behaviour of some steel alloys10.1016/0011-9164(94)00014-X ↗