journal article·2017-04

Photoelectrochromic devices based on sputtered WO3 and TiO2 films

Shankar Bogati, Andreas Georg, Wolfgang Graf

Publisher page

Abstract

Abstract The photoelectrochromic (PEC) device, a combination of a dye solar cell and an electrochromic film, can be used for the dynamic solar control of buildings under illumination or with an external voltage. Typically, titanium oxide (TiO 2 ) and tungsten oxide (WO 3 ) films are being prepared from colloids or sol-gel chemistry with high porosity and high surface area as functional layers for a photoelectrochromic device in lab scale. We have, for the first time, successfully developed a PEC device with conventionally sputter deposited TiO 2 and WO 3 films. This coating technique is attractive due to the well documented upscaling capability and industrial viability for window applications. The functional layers WO 3 and TiO 2 were deposited onto fluorine doped oxide (F:SnO 2 ) coated glass . Characterization of WO 3 and TiO 2 was performed in an electrochromic cell and in a dye solar cell, respectively. Three types of PEC devices with different layer configuration were constructed and their performance based on visual transmissions was compared. In best case, the visual transmission could be switched from 61 down to 15% in 30 min under 1.5 A.M. illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · TiO2 Photocatalysis and Solar Cells · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Comparison of photoelectrochromic devices with different layer configurations10.1149/1.1496487 ↗
2. Rate-determining processes in photoelectrochromic devices
3. New photoelectrochromic device10.1016/S0013-4686(01)00391-7 ↗
4. Performance of a solid-state photoelectrochromic device10.1016/j.solmat.2004.01.043 ↗
5. Preparation and characterisation of nano-structured WO3-TiO2 layers for photoelectrochromic devices10.1007/s10971-005-4794-3 ↗
6. Performance of a solid-state photoelectrochromic window
7. Photoelectrochromic windows and displays10.1038/383608a0 ↗
8. Switchable windows with tungsten oxide10.1016/j.vacuum.2007.10.020 ↗
9. A. Georg, A. Georg, U. Opara Krašovec, V. Wittwer, Sixth International Meeting on Electrochromism, August 29th - September 2nd 2004, in: j. Vondrák, V. Novák, J. Reiter (Eds.) Sixth international meeting on electrochromism, 2004, pp. 146-149.
10. Dye-sensitized sputtered titanium oxide films for photovoltaic applications: influence of the O2/Ar gas flow ratio during the deposition10.1016/S0927-0248(02)00215-5 ↗
11. Nanocrystalline Ti-oxide-based solar cells made by sputter deposition and dye sensitization: efficiency versus film thickness10.1016/S0927-0248(99)00167-1 ↗
12. Photoelectrochemical studies of dye-sensitized polycrystalline titanium oxide thin films prepared by sputtering10.1016/S0040-6090(98)01482-5 ↗
13. High Rate Reactive sputter deposition of TiO2 films for photocatalyst and dye-sensitized solar cells10.7567/JJAP.50.045802 ↗
14. Investigation of sputter-deposited TiO2 thin film for the fabrication of dye-sensitized solar cells10.1016/j.tsf.2007.12.022 ↗
15. Columnar rutile TiO2 based dye-sensitized solar cells by radio-frequency magnetron sputtering10.1016/j.jpowsour.2008.05.089 ↗
16. Preparation of anatase TiO2 thin films for dye-sensitized solar cells by DC reactive magnetron sputtering technique10.1016/j.tsf.2010.08.027 ↗
17. Electrochromic device with a redox electrolyte10.1016/j.solmat.2009.02.009 ↗
18. Tetramethylthiourea (TMTU) as an alternative redox mediator for electrochromic devices10.1016/j.solmat.2016.07.023 ↗
19. Sputtered Si3N4 and SiO2 electron barrier layer between a redox electrolyte and the WO3 film in electrochromic devices10.1016/j.solmat.2016.08.023 ↗
20. Properties of sputtered TiO2 thin films as a function of deposition and annealing parameters10.1016/j.physb.2015.01.037 ↗
21. Phase Transitions of the WO3 Layer in Photoelectrochromic Devices
22. The dependence of the chemical potential of WO3 films on hydrogen insertion10.1016/S0927-0248(01)00034-4 ↗
23. Theory and measurement of the change in chemical potential of hydrogen in amorphous HxWO3 as a function of the stoichiometric parameter x10.1016/0038-1098(76)90357-4 ↗
24. Li+ ion insertion in TiO2 (anatase). 2. Voltammetry on nanoporous films10.1021/jp970490q ↗
25. Electrochemical lithium incorporation into WO3 and MoO3 thin films10.1016/0167-2738(82)90075-3 ↗