journal article·2014-08

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Shiyong Liu, Xinwei Niu, Wei Shan, Wei Lu, Jiayi Zheng, Yunfeng Li, Haibin Duan, Weijuan Quan, Weizhi Han, C.R. Wronski, Deren Yang

Publisher page

Abstract

Abstract The reactive ion etching in combination with acidic etching (acidic+RIE) is applied to form the front surface texturing of 156×156 mm2 multicrystalline silicon (mc-Si) wafers in order to improve the cell efficiency. The scanning electron microscope (SEM) analyses indicate that the RIE process produces dense nanoscale ridge-like structures based on the acidic textured surfaces, and these structures generate an excellent antireflection effect. The matching processes including the post-cleaning, the phosphorus diffusion, and the deposition of silicon nitride (SiNX) antireflection coating are optimized. The acidic+RIE textured surfaces in combination with high sheet resistance emitters result in a remarkable enhancement in short wavelength response and then improve the short circuit current density (JSC) significantly. The absolute conversion efficiency of acidic+RIE textured solar cells is improved 0.51% on average compared to the acidic textured solar cells in mass production, and a maximum full-area cell efficiency of 18.49% is achieved on the mc-Si solar cell with a conventional cell structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Relation between solar cell efficiency and crystal defect etching induced by acidic texturization on multicrystalline silicon material10.1016/j.solmat.2012.05.023 ↗
2. Efficiency improved by acid texturization for multi-crystalline silicon solar cells10.1016/j.solener.2010.10.020 ↗
3. Experimental studies on the mechanism of wet chemical etching of silicon in HF/HNO3 mixtures10.1149/1.2116727 ↗
4. A cost-effective alkaline multicrystalline silicon surface polishing solution with improved smoothness10.1016/j.solmat.2009.05.024 ↗
5. Novel low cost chemical texturing for very large area industrial multi-crystalline silicon solar cells10.1088/0268-1242/20/9/009 ↗
6. Alkaline etching for reflectance reduction in multicrystalline silicon solar cells10.1149/1.1738137 ↗
7. Reduction of absorption loss in multicrystalline silicon via combination of mechanical grooving and porous silicon10.1002/pssc.201000153 ↗
8. C. Gerhards, C. Marckmann, R. Toelle, M. Spiegel, P. Fath, G. Willeke, E. Bucher, Mechanically V-textured low cost multicrystalline silicon solar cells with a novel printing metallization, in: Proceedings of the 26th IEEE Photovoltaic Specialists Conference, Anaheim, CA, USA, 1997, pp. 43–46.10.1109/PVSC.1997.653920 ↗
9. Enhanced carrier collection observed in mechanically structured silicon with small diffusion length10.1063/1.371809 ↗
10. Optical and electrical properties of laser texturing for high-efficiency solar cells10.1002/pip.667 ↗
11. Laser surface treatment of multicrystalline silicon for enhancing optical properties10.1016/j.jmatprotec.2007.11.278 ↗
12. Large-area multicrystalline silicon solar cell fabrication using reactive ion etching (RIE)10.1016/j.solmat.2010.03.029 ↗
13. Study of SF6/N2O microwave plasma for surface texturing of multicrystalline (<150μm) solar substrates10.1143/JJAP.51.10NA01 ↗
14. Texturisation of multicrystalline silicon wafers for solar cells by reactive ion etching through colloidal masks10.1016/S0927-0248(02)00214-3 ↗
15. The black silicon method. VIII. A study of the performance of etching silicon using SF6/O2-based chemistry with cryogenical wafer cooling and a high density ICP source10.1016/S0026-2692(01)00039-8 ↗
16. High-efficiency (19%) screen-printed textured cells on low-resistivity float-zone silicon with high sheet-resistance emitters10.1002/pip.688 ↗
17. Characterization of PIII textured industrial multicrystalline silicon solar cells10.1016/j.solener.2012.07.006 ↗
18. Surface recombination velocity of phosphorus-diffused silicon solar cell emitters passivated with plasma enhanced chemical vapor deposited silicon nitride and thermal silicon oxide10.1063/1.1350633 ↗
19. Realization of ultra shallow junctions by PIII: application to solar cells10.1016/j.surfcoat.2004.04.046 ↗
20. Formation of shallow junctions in gallium and phosphorus compensated silicon for cell performance improvement10.1016/j.scriptamat.2011.07.052 ↗