Influence of high work function ITO:Zr films for the barrier height modification in a-Si:H/c-Si heterojunction solar cells
Source abstract
Abstract
Abstract We report the influence of magnetron sputtered zirconium-doped indium tin oxide (ITO:Zr) films with high mobility and work function on the heterojunction with intrinsic thin layer (HIT) solar cell. The addition of oxygen (O2) to argon (Ar) flow ratio during the deposition process improves the Hall mobility of the ITO:Zr films while the carrier concentration decreased. The small amount of oxygen resulted in an enhancement of work function while excess amount of O2 was not suitable for the electrical and surface properties of ITO:Zr films. The increase of O2/Ar flow ratio from 0% to 0.4% improved the work function from 5.03 to 5.13 eV while the conductivity of ITO:Zr films remained about the same. The ITO:Zr films were employed as a front anti-reflection layer in a HIT solar cell and the best photo-voltage parameters were found to be Voc=710 mV, Jsc=33.66 mA/cm2, FF=72.4%, and η=17.31% for the O2/Ar flow ratio of 0.4%. The increase of ITO:Zr work function leads to an increase in open circuit voltage (Voc) and fill factor (FF) of the device. Therefore, the ITO:Zr films with high work function can be used to modify the front barrier height in the HIT solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Simulation and study of the influence of the buffer intrinsic layer, back-surface field, densities of interface defects, resistivity of p-type silicon substrate and transparent conductive oxide on heterojunction with intrinsic thin-layer (HIT) solar cell10.1016/j.solener.2010.01.029 ↗
2. Study on the ITO work function and hole injection barrier at the interface of ITO/a-Si:H(p) in amorphous/crystalline silicon heterojunction solar cells10.1016/j.materresbull.2012.04.106 ↗
3. Influence of the front contact barrier height on the indium tin oxide/hydrogenated p-doped amorphous silicon heterojunction solar cells10.1016/j.tsf.2008.02.031 ↗
4. The effect of substrate temperature on the properties of ITO thin films for OLED applications10.1088/0268-1242/21/12/043 ↗
5. Study on the electrical properties of ITO films deposited by facing target sputter deposition10.1088/0022-3727/42/7/075412 ↗
6. Electrical and optical properties of ITO and ITO:Zr transparent conducting films10.1016/j.mssp.2008.03.003 ↗
7. Performance of InSnZrO as transparent conductive oxides10.1002/pssa.200925278 ↗
8. Advantages of transparent conducting oxide thin films with controlled permittivity for thin film photovoltaic solar cells10.1016/j.tsf.2011.01.143 ↗
9. Work function modification of indium–tin oxide by surface plasma treatments using different gases10.1143/JJAP.48.021601 ↗
10. RF magnetron sputtered indium tin oxide films with high transmittance and work function for a-Si:H/c-Si heterojunction solar cells10.1016/j.vacuum.2013.07.004 ↗
11. Role of the work function of transparent conductive oxide on the performance of amorphous/crystalline silicon heterojunction solar cells studied by computer simulation10.1002/pssa.200723276 ↗
12. Role of front contact work function on amorphous silicon/crystalline silicon heterojunction solar cell performance10.1109/LED.2003.811405 ↗
13. Influence of oxygen flow rate on microstructural, electrical and optical properties of indium tin tantalum oxide films10.1016/j.mssp.2011.10.004 ↗
14. Properties of ITO:Zr films deposited by co-sputtering10.1007/s11801-008-7132-5 ↗
15. High mobility transparent conducting oxides for thin film solar cells10.1016/j.tsf.2009.09.044 ↗
16. Characteristics of zirconium-doped indium tin oxide thin films deposited by magnetron sputtering10.1016/j.solmat.2008.04.019 ↗
17. Ginley · 2010 · 126
18. Characterization of treated indium–tin-oxide surfaces used in electroluminescent devices10.1063/1.370948 ↗
19. Transparent conducting Zr-doped In2O3 thin films for organic light-emitting diodes10.1063/1.1350595 ↗
20. Application of hydrogen-doped In2O3 transparent conductive oxide to thin-film microcrystalline Si solar cells10.1016/j.tsf.2009.08.060 ↗
21. Burst · 2010 · 90
22. RF magnetron sputtered ITO:Zr thin films for the high efficiency a-Si:H/c-Si heterojunction solar cells
23. Optimization and characterization of amorphous/crystalline silicon heterojunction solar cells10.1002/pip.398 ↗
24. The physical reason of intense electroluminescence in ITO–Si heterostructures10.1016/j.tsf.2007.03.116 ↗