Grain size dependence of degradation of aluminium/calcium cathodes in organic solar cells following exposure to humid air
Source abstract
Abstract
Cross-sectional TEM and SEM have been used to study the degradation of organic solar cells when exposed to a high humidity environment. Two obvious effects were caused by this exposure: voids at the aluminium/calcium interface and large bubble like protrusions on the top surface. Water ingress was found to occur mainly from the edge rather than through pinholes or defects in the aluminium film. The grain size of the aluminium used in the cathode was varied and small grained devices were found to have degraded faster. The importance of minimising water ingress into devices through cathode design and choice of materials is highlighted.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
2. Recyclable organic solar cells on cellulose nanocrystal substrates
3. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
4. Delineation of the effects of water and oxygen on the degradation of organic photovoltaic devices10.1016/j.solmat.2012.06.028 ↗
5. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
6. Polymer solar cells with enhanced lifetime by improved electrode stability and sealing10.1016/j.solmat.2013.05.013 ↗
7. Electrical characterization of organic solar cell contact degradation resulting from ambient exposure10.1016/j.orgel.2013.08.007 ↗
8. Accelerated lifetime measurements of P3HT10.1016/j.synthmet.2005.06.016 ↗
9. Flexible organic P3HT10.1016/j.solmat.2008.01.004 ↗
10. A setup for studying stability and degradation of polymer solar cells10.1016/j.solmat.2008.02.008 ↗
11. A simple miniature controlled-atmosphere chamber for optoelectronic characterizations10.1016/j.solmat.2010.03.017 ↗
12. Multiple stress degradation analysis of the active layer in organic photovoltaics10.1016/j.solmat.2013.10.016 ↗
13. Degradation mechanism of organic solar cells with aluminum cathode10.1016/j.solmat.2011.07.020 ↗
14. Effect of buffer layers on stability of polymer-based organic solar cells10.1143/JJAP.49.01AC02 ↗
15. Pathways for the degradation of organic photovoltaic P3HT10.1016/j.solmat.2008.01.020 ↗
16. Observation of degradation processes of Al electrodes in organic electroluminescence devices by electroluminescence microscopy, atomic force microscopy, scanning electron microscopy, and Auger electron spectroscopy10.1063/1.357224 ↗
17. Morphological change in the degradation of Al electrode surfaces of electroluminescent devices by fluorescence microscopy and AFM10.1016/0040-6090(95)06781-7 ↗
18. Degradation of nonencapsulated polymer-based light-emitting diodes10.1063/1.120332 ↗
19. Investigation of aged organic solar cell stacks by cross-sectional transmission electron microscopy coupled with elemental analysis10.1007/s10853-012-7020-z ↗
20. Focused ion beam assisted investigations of Al interface in polythiophene10.1016/j.solmat.2012.09.022 ↗
21. D.J. McClure, N. Copeland, Evaporated aluminum on polyester: optical, electrical, and barrier properties as a function of thickness and time (Part II), in: Proceedings of AIMCAL Fall Technical Conference, 2010.
22. Growth and morphology of sputtered aluminum thin films on P3HT surfaces10.1021/am101195m ↗
23. Impact of contact evolution on the shelf life of organic solar cells10.1039/b910213b ↗
24. Lifetimes of organic photovoltaics10.1016/j.solmat.2005.03.004 ↗
25. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
26. Spatially resolved photocurrent measurements of organic solar cells10.1016/j.solmat.2012.10.027 ↗
27. Influence of cathode oxidation via the hole extraction layer in polymer10.1016/j.orgel.2011.01.025 ↗
28. Water ingress into and climate dependent lifetime of organic photovoltaic cells investigated by calcium corrosion tests10.1016/j.solmat.2013.10.023 ↗
29. Electrical calcium test for moisture barrier evaluation for organic devices10.1063/1.3633956 ↗
30. Carbazole and thienyl benzo[1,2,5]thiadiazole based polymers with improved open circuit voltages and processability for application in solar cells10.1039/c1jm12089a ↗
31. Lide · 1991
32. Novel scheme for the preparation of transmission electron microscopy specimens with a focused ion beam10.1116/1.586537 ↗
33. The deformation and ageing of mild steel10.1088/0370-1301/64/9/303 ↗
34. The cleavage strength of polycrystals
35. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
36. Differential resistance analysis of charge carrier losses in organic bulk heterojunction solar cells10.1002/aenm.201100196 ↗