journal article·2015-01

Influence of random pyramid surface texture on silver screen-printed contact formation for monocrystalline silicon wafer solar cells

Ankit Khanna, Prabir K. Basu, Aleksander Filipovic, Vinodh Shanmugam, Christian Schmiga, Armin G. Aberle, Thomas Mueller

Publisher page

Abstract

Abstract Most industrial monocrystalline silicon wafer (mono-Si) solar cells are metallised by screen printing. Silver (Ag) pastes are commonly used to form electrodes to phosphorus-doped n+ Si. However, there is still ambiguity about the influence of the random-pyramid surface texture on Ag screen-printed contacts for mono-Si solar cells. We present an experimental study to investigate this influence using screen-printed p-type mono-Si cell groups fabricated with a controlled variation in the alkaline surface texturisation process. It is observed that cell groups fabricated on Czochralski (Cz) wafers with smaller pyramids achieve higher average fill factor (FF) and lower average specific contact resistance than cell groups fabricated on Cz wafers with larger pyramids. To explain these observations, the pyramid texture height distributions are characterised statistically and the distribution statistics are correlated to electrical solar cell measurements and microstructure investigations of the Ag/n+ Si contact interface. Microstructure investigations reveal that most Ag crystallite growth is concentrated around the upper part of the pyramids and hence pyramid density is identified as an important parameter influencing contact formation. The influence of average pyramid height and pyramid height uniformity within a pyramid texture height distribution is also clarified with regards to contact formation. It is further observed that direct Ag crystallite contacts to the bulk Ag metallisation are not a prerequisite for achieving high FF (>80%). Based on the study, guidelines are developed for tailoring random-pyramid surface textures to optimise Ag screen-printed contact formation to n+ Si for mono-Si solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Physical understanding of printed thick-film front contacts of crystalline Si solar cells—review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
2. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
3. Investigation of Ag-bulk/glassy-phase/Si heterostructures of printed Ag contacts on crystalline Si solar cells10.1016/j.solmat.2008.02.032 ↗
4. Ag-based thick-film front metallization of silicon solar cells10.1155/1989/27954 ↗
5. Electron microscopy study of front-side Ag contact in crystalline Si solar cells10.1063/1.3086663 ↗
6. Microstructural comparison of silicon solar cells’ front-side Ag contact and the evolution of current conduction mechanisms10.1063/1.3642956 ↗
7. The nature of screen printed front side silver contacts—results of the project MikroSol10.1016/j.egypro.2013.11.085 ↗
8. Investigation of the mechanism resulting in low resistance Ag thick-film contact to Si solar cells in the context of emitter doping density and contact firing for current-generation Ag paste10.1109/JPHOTOV.2013.2285621 ↗
9. Electrical and microstructural analysis of contact formation on lightly doped phosphorus emitters using thick-film Ag screen printing pastes10.1109/JPHOTOV.2013.2291313 ↗
10. Study of dielectric layers for bifacial n-type silicon solar cells with regard to optical properties, surface passivation quality, and contact formation10.1109/JPHOTOV.2013.2296374 ↗
11. High-temperature contact formation on n-type silicon: basic reactions and contact model for seed-layer contacts10.1002/adfm.200901305 ↗
12. Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells10.1007/s11664-006-0311-x ↗
13. Effect of Ag particle size in thick-film Ag paste on the electrical and physical properties of screen printed contacts and silicon solar cells10.1149/1.2126579 ↗
14. Liquid silicate additive for alkaline texturing of mono-Si wafers to improve process bath lifetime and reduce IPA consumption10.1016/j.solmat.2013.01.037 ↗
15. Improved anisotropic etching process for industrial texturing of silicon solar cells10.1016/S0927-0248(98)00180-9 ↗
16. J. Krümberg, I. Melnyk, M. Schmidt, M. Michel, T. Fidler, M. Kagerer, P. Fath, L. Heiliger, H. Nussbaumer, New innovative alkaline texturing process for CZ silicon wafers, in: 24th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, 2009, 1748-1750.
17. K. Wijekoon, T. Weidman, S. Paak, K. MacWilliams, Production ready noval texture etching process for fabrication of single crystalline silicon solar cells, in: Photovoltaic Specialists Conference (PVSC), 2010 35th IEEE, 2010, pp. 003635-003641.10.1109/PVSC.2010.5614441 ↗
18. M. Moynihan, C. O’Connor, B. Barr, S. Tiffany, W. Braun, G. Allardyce, J. Rentsch, K. Birmann, In-line and vertical texturing of mono-crystalline solar cells, in: Photovoltaic Specialists Conference (PVSC), 2010 35th IEEE, 2010, pp. 001028-001033.10.1109/PVSC.2010.5614629 ↗
19. K. Mayer, D. Kray, T.O. Perez, M. Shumann, S.W. Glunz, New Surfactants for combined cleaning and texturing of mono-crystalline silicon wafers after wire-sawing, in: 23rd European Photovoltaic Solar Energy Conference and Exhibition, Valenica, 2008.
20. Influence of surface topography on the glass coverage in the contact formation of silver screen-printed Si solar cells10.1109/JPHOTOV.2012.2209406 ↗
21. Formation of various pyramidal structures on monocrystalline silicon surface and their influence on the solar cells10.1155/2013/716012 ↗
22. Experimental evidence of direct contact formation for the current transport in silver thick film metallized silicon emitters10.1063/1.3665718 ↗
23. N. Ximello, A. Dastgeheib-Shirazi, S. Scholz, G. Hahn, Influence of pyramid size of chemically textured silicon wafers on the characteristics of industrial solar cells, in: 25th European Photovoltaic Solar Energy Conference and Exhibition, Valencia, 2010, 1332-1336.
24. P.K. Basu, A. Khanna, Z. Hameiri, The effect of front pyramid heights on the efficiency of homogeneously textured inline-diffused screen-printed monocrystalline silicon wafer solar cells, Manuscript submitted.
25. 18.7% Efficient inline-diffused screen-printed silicon wafer solar cells with deep homogeneous emitter etch-back10.1016/j.solmat.2013.06.046 ↗
26. Schroder · 2006 · 144
27. Statistical approach to the description of random pyramid surfaces using 3D surface profiles10.1016/j.egypro.2011.06.114 ↗
28. V. Velidandla, X. Jim, H. Zhen, K. Wijekoon, D. Tanner, Texture process monitoring in solar cell manufacturing using optical metrology, in: 37th IEEE Photovoltaic Specialists Conference, Seattle, 2011, pp. 1744-1747.10.1109/PVSC.2011.6186291 ↗
29. K. Birmann, M. Demant, S. Rein, Optical characterization of random pyramid texturization, in: 26th European PV Solar Energy Conference, Hamburg, 2011, pp. 1454-1458.
30. Microscopic parameters to describe homogeneity of alkaline texture on Si-wafers10.1016/j.egypro.2013.07.355 ↗
31. Determination of kilovolt electron energy dissipation vs penetration distance in solid materials10.1063/1.1660019 ↗
32. CASINO v2.42-a fast and rasy-to-use modeling tool for scanning electron microscopy and microanalysis users10.1002/sca.20000 ↗
33. Impact of excess phosphorus doping and Si crystalline defects on Ag crystallite nucleation and growth in silver screen-printed Si solar cells
34. Horteis · 2009 · 143
35. Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating10.1002/pip.855 ↗
36. Schubert · 2006 · 56
37. Abnormal dopant distribution in POCl3 diffused n+ emitter of textured silicon solar cells10.1109/LED.2010.2098840 ↗
38. Influence of texture feature size on the optical performance of silicon solar cells10.1002/pip.571 ↗