Heat pipe flat plate solar collectors operating with nanofluids
Source abstract
Abstract
Abstract The aim of this work is to characterize numerically the performance of a heat pipe flat plate solar collector operating with nanofluids. A mathematical formulation under a 1-dimensional transient heat transfer model was introduced for this purpose. Spatio-temporal temperature variation of each collector subelement was predicted for a typical sunny day in the Moroccan city, Fez. CuO, Al2O3 and TiO2-based nanofluids were compared energetically and exergetically under various operating modes. The nanoparticle loading and mass flow rate of the working fluid were varied in the range of 0–3% and 0.018–0.036 kg/s, respectively. For the flow regime under focus, the decreased specific heat of nanofluids is the main thermal property responsible for the performance enhancement when nanofluids are used. CuO-based nanofluid was found to engender the highest relative enhancements in the energetic and exergetic efficiencies which were estimated at 2.7% and 11.1%, respectively compared to the base fluid (water). Using nanofluids for this collector class can ensure up to 2.95% surplus daily thermal energy generation compared to the base fluid. Moreover, the use of CuO-based nanofluid caused the largest increase in the pressure drop across the collector with a maximum value of 13.26% predicted for 3% nanoparticle loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Nanofluid Flow and Heat Transfer · Heat Transfer Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Energetic, exergetic, economic and environmental (4 E) assessment process of wind power generation10.1016/j.jclepro.2019.06.299 ↗
2. Management of photovoltaic excess electricity generation via the power to hydrogen concept: a year-round dynamic assessment using artificial neural networks10.1016/j.ijhydene.2020.05.262 ↗
3. A review on exergy analysis of solar parabolic collectors10.1016/j.solener.2020.01.025 ↗
4. Solar PV integration in commercial buildings for self-consumption based on life-cycle economic/environmental multi-objective optimization10.1016/j.jclepro.2020.122375 ↗
5. Yearly performance of low-enthalpy parabolic trough collectors in MENA region according to different sun-tracking strategies10.1016/j.applthermaleng.2017.09.099 ↗
6. Advances on solar thermal cogeneration processes based on thermoelectric devices: a review10.1016/j.solmat.2019.109954 ↗
7. Exergy analysis of solar thermal collectors and processes10.1016/j.pecs.2016.05.002 ↗
8. Thermal performance of an evacuated tube heat pipe solar water heating system in cold season10.1016/j.applthermaleng.2018.12.078 ↗
9. Forced-circulation solar water heating system using heat pipe-flat plate collectors: energy and exergy analysis10.1016/j.energy.2019.05.063 ↗
10. Progress and latest developments of evacuated tube solar collectors10.1016/j.rser.2015.07.016 ↗
11. Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications10.1016/j.apenergy.2018.06.067 ↗
12. Thermal performance of phase change material integrated heat pipe evacuated tube solar collector system: an experimental assessment10.1016/j.enconman.2019.112205 ↗
13. Optimum number and arrangement of evacuated-tube solar collectors under various operating conditions10.1016/j.enconman.2019.112032 ↗
14. A new version of a low concentration evacuated tube solar collector: optical and thermal investigation10.1016/j.solener.2019.01.039 ↗
15. Thermal performance analysis of a co-axial evacuated tube collector with single and two-phase flow consideration under North-eastern India climatic condition10.1016/j.solener.2019.11.097 ↗
16. Applications of nanotechnology in renewable energies—a comprehensive overview and understanding10.1016/j.rser.2014.10.027 ↗
17. Demonstration of plausible application of gallium nano-suspension in microchannel solar thermal receiver: experimental assessment of thermo-hydraulic performance of microchannel10.1016/j.icheatmasstransfer.2018.03.013 ↗
18. Experimental studies of flow boiling heat transfer by using nanofluids10.1007/s10973-019-08333-2 ↗
19. Thermal performance analysis of a microchannel heat sink cooling with copper oxide-indium (CuO/In) nano-suspensions at high-temperatures10.1016/j.applthermaleng.2018.04.024 ↗
20. The use of nanofluids for enhancing the thermal performance of stationary solar collectors: a review10.1016/j.rser.2016.05.063 ↗
21. Applications of nanotechnology to improve the performance of solar collectors–Recent advances and overview10.1016/j.rser.2016.04.050 ↗
22. Thermodynamic evaluation and optimization of a flat plate collector operating with alumina and iron mono and hybrid nanofluids
23. Energy and exergy analyses of a parabolic trough collector operated with nanofluids for medium and high temperature applications10.1016/j.enconman.2017.10.059 ↗
24. Performance assessment of linear Fresnel solar reflector using MWCNTs/DW nanofluids10.1016/j.renene.2019.10.137 ↗
25. A review of nano fluid role to improve the performance of the heat pipe solar collectors10.1016/j.egypro.2017.03.044 ↗
26. Diurnal thermal evaluation of an evacuated tube solar collector (ETSC) charged with graphene nanoplatelets-methanol nano-suspension10.1016/j.renene.2019.04.091 ↗
27. Improving the performance of heat pipe-evacuated tube solar collector experimentally by using Al2O3 and CuO/acetone nanofluids10.1016/j.solener.2018.08.013 ↗
28. Assessment of the thermal performance of a thermosyphon heat pipe using zirconia-acetone nanofluids10.1016/j.renene.2019.01.035 ↗
29. Experimental investigation of heat pipe solar collector using MgO nanofluids10.1016/j.solmat.2018.10.025 ↗
30. Thermal performance of a thermosyphon heat pipe evacuated tube solar collector using silver-water nanofluid for commercial applications10.1016/j.renene.2018.01.031 ↗
31. Numerical simulation investigation on thermal performance of heat pipe flat-plate solar collector10.1016/j.applthermaleng.2017.02.089 ↗
32. Effect analysis on energetic, exergetic and financial performance of a flat plate collector with heat pipes10.1016/j.enconman.2019.04.081 ↗
33. Long‐wave radiation from clear skies10.1002/qj.49708938105 ↗
34. A comparative review on the specific heat of nanofluids for energy perspective10.1016/j.rser.2014.05.081 ↗
35. Review on thermal properties of nanofluids: recent developments10.1016/j.cis.2015.08.014 ↗
36. Comprehensive study on nanofluid and ionanofluid for heat transfer enhancement: a review on current and future perspective10.1016/j.molliq.2020.112787 ↗
37. Measurement and model validation of nanofluid specific heat capacity with differential scanning calorimetry10.1155/2012/181079 ↗
38. The effect of Brownian motion on the bulk stress in a suspension of spherical particles10.1017/S0022112077001062 ↗
39. Thermal performance analysis of a parabolic trough collector using water-based green-synthesized nanofluids10.1016/j.solener.2018.06.012 ↗
40. Thermal conductivity of heterogeneous two-component systems10.1021/i160003a005 ↗
41. Energy, efficiency, economic impact, and heat transfer aspects of solar flat plate collector with Al2O3 nanofluids and wire coil with core rod inserts
42. Optimization and thermal performance of evacuated tube solar collector with various nanofluids10.1016/j.ijheatmasstransfer.2020.119496 ↗
43. Numerical analysis of evacuated tube solar collectors using nanofluids10.1016/j.solener.2019.08.074 ↗
44. Influence of particle size on the effective thermal conductivity of nanofluids: a critical review10.1016/j.apenergy.2020.114684 ↗
45. Churchill · 1977
46. Hydraulic and heat transfer study of SiO2/water nanofluids in horizontal tubes with imposed wall temperature boundary conditions10.1016/j.ijheatfluidflow.2011.01.003 ↗
47. Thermal and power performance analysis for heat transfer applications of nanofluids in flows around cylinder10.1016/j.applthermaleng.2016.10.008 ↗
48. Thermal enhancement of solar parabolic trough collectors by using nanofluids and converging-diverging absorber tube10.1016/j.renene.2016.03.062 ↗
49. Heat transfer and pressure drop correlations of nanofluids: a state of art review10.1016/j.rser.2018.03.108 ↗
50. Convective heat transfer and friction factor correlations of nanofluid in a tube and with inserts: a review10.1016/j.rser.2012.11.041 ↗
51. Theoretical and experimental investigation of wickless heat pipes flat plate solar collector with cross flow heat exchanger10.1016/j.enconman.2006.09.021 ↗
52. Performance analysis of hybrid nanofluids in flat plate solar collector as an advanced working fluid10.1016/j.solener.2018.04.017 ↗
53. An experimental study on β-cyclodextrin modified carbon nanotubes nanofluids for the direct absorption solar collector (DASC): specific heat capacity and photo-thermal conversion performance10.1016/j.solmat.2019.110240 ↗
54. Energy, economic and environmental analysis of metal oxides nanofluid for flat-plate solar collector10.1016/j.enconman.2013.07.038 ↗
55. Improvement in the performance of solar collectors with nanofluids—a state-of-the-art review10.1016/j.nanoso.2019.100276 ↗
56. Investigation of the stability of MgO nanofluid and its effect on the thermal performance of flat plate solar collector10.1016/j.renene.2019.09.126 ↗
57. Thermal performance of a nanofluid-based flat plate solar collector: a transient numerical study10.1016/j.applthermaleng.2017.10.166 ↗