journal article·2021-01Open access

Characterization and testing of solid particles to be used in CSP plants: Aging and fluidization tests

Minerva Díaz-Heras, Alejandro Calderón, Mónica Navarro, J.A. Almendros-Ibáñez, A. Inés Fernández, C. Barreneche

Abstract

The main limitation of Concentrated Solar Power (CSP) is its maximum operating temperature, since the main fluid used as heat transfer fluid (HTF) and thermal storage media (TES) is molten salts, which degrade around 565 ◦C. Therefore, there is great interest in developing HTFs that allow the maximum working temperature to be increased to more than 565 ◦C. This increase in the maximum operating temperature of the HTFs will, in turn, allow CSP plant efficiency to be enhanced. Different studies have proposed using particles as a medium to capture and store solar energy, but very little is known about the effect on the particles after resisting several cycles of cooling and heating and what happens to the particles' physical properties when they are fluidized. It is true that a variety of solid particles permit high performance to be achieved at high temperatures and with low material costs, but not all particles are valid for this purpose. This work focuses on different materials considered promising candidates for use as alternative HTF and storage materials in CSP plants, which were characterized and tested: sand, carbo Accucast ID50 and silicon carbide. The properties of the particles before and after being fluidized (assessing their resistance to abrasion) and before and after high temperature (900 ◦C) thermal treatments (aging treatment) are the main finding of this paper. This work highlights the considerable advantages of SiC and carbo over sand. This study also determines that the combination of high temperature and several hours of fluidization does not affect the diameter of the particles: However, the fluidized samples vary considerably in diameter. In this way, SEM and DSC techniques highlight the problem of the fine appearance associated with sand during fluidization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar Energy Systems and Technologies · Phase Change Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Bandyopadhyay · 2019 · 227
2. Li · 2017
3. International Energy Agency
4. 2014
5. Status of power system transformation
6. A review of solar thermal energy storage in beds of particles: packed and fluidized beds10.1016/j.solener.2018.05.047 ↗
7. Advances in central receivers for concentrating solar applications10.1016/j.solener.2017.03.048 ↗
8. A review of high-temperature particle receivers for concentrating solar power10.1016/j.applthermaleng.2016.04.103 ↗
9. Technology advancements for next generation falling particle receivers10.1016/j.egypro.2014.03.043 ↗
10. High performance integrated receiver-storage system for concentrating solar power beam-down system10.1016/j.solener.2019.05.041 ↗
11. CSP on fluidized particles with a beam-down reflector: comparative study of different fluidization technologies10.1016/j.solener.2019.09.006 ↗
12. High temperature systems using solid particles as TES and HTF material: a review10.1016/j.apenergy.2017.12.107 ↗
13. SolarPACES · 2018
14. Review of solid particle materials for heat transfer fluid and thermal energy storage in solar thermal power plants10.1002/est2.63 ↗
15. Study on solar absorptance and thermal stability of solid particles materials used as TES at high temperature on different aging stages for CSP applications10.1016/j.solmat.2019.110088 ↗
16. Dense suspension of solid particles as a new heat transfer fluid for concentrated solar thermal plants: on-sun proof of concept10.1016/j.ces.2013.08.051 ↗
17. Characterization of desert sand to be used as a high-temperature thermal energy storage medium in particle solar receiver technology10.1016/j.apenergy.2018.02.106 ↗
18. Accucast
19. Krause · U.S. Patent Appl. · 2019 · 16/167 · 317
20. New proposed methodology for specific heat capacity determination of materials for thermal energy storage (TES) by DSC10.1016/j.est.2017.02.002 ↗
21. Instituto de Diagnóstico Ambiental y Estudios del Agua
22. Kunii · 2013
23. A variable-thickness two-dimensional bed for investigating gas—solid fluidized bed hydrodynamics10.1016/0032-5910(87)85002-7 ↗
24. Characterization of desert sand to be used as a high-temperature thermal energy storage medium in particle solar receiver technology10.1016/j.apenergy.2018.02.106 ↗
25. Experimental study of different materials in fluidized beds with a beam-down solar reflector for CSP applications
26. Theoretical and experimental study of radiant heat transfer in a solar fluidized-bed receiver10.1002/aic.690280402 ↗
27. High temperature solar gas heating comparison between packed and uidized bed receivers10.1016/0038-092X(83)90050-6 ↗
28. A review of solar thermal energy storage in beds of particles: packed and fluidized beds10.1016/j.solener.2018.05.047 ↗
29. Heat transfer in directly irradiated fluidized beds10.1016/j.solener.2016.01.057 ↗
30. Beam-down linear fresnel reflector: BDLFR10.1016/j.renene.2019.07.017 ↗
31. Types of gas fluidization10.1016/0032-5910(73)80037-3 ↗
32. Flow characteristics in a bubbling fluidized bed at elevated temperature10.1016/S0255-2701(02)00071-5 ↗
33. Minimum fluidization velocity at elevated temperatures for geldart's group-b powders10.1016/j.expthermflusci.2007.03.003 ↗
34. Characterization of particle flow in a free-falling solar particle receiver10.1115/1.4035258 ↗
35. A method for experimental thermo-mechanical aging of materials submitted to concentrated solar irradiation10.1016/j.solmat.2018.12.017 ↗