journal article·2020-03Open access

Design, characterization, and fabrication of solar-retroreflective cool-wall materials

Ronnen Levinson, Sharon Chen, Jonathan Slack, Howdy Goudey, Tatsuya Harima, Paul Berdahl

Abstract

Abstract Raising urban albedo increases the fraction of incident sunlight returned to outer space, cooling cities and their buildings. We evaluated the angular distribution of solar radiation incident on exterior walls in 17 U S. climates to develop performance parameters for solar-retroreflective walls, then applied first-principle physics and ray-tracing simulations to explore designs. Our analysis indicates that retroreflective walls must function at large incidence angles to reflect a substantial portion of summer sunlight, and that this will be difficult to attain with materials that rely on total internal reflection. Gonio-spectrophotometer measurements of the solar spectral bi-directional reflectivity of a bicycle reflector showed little to no retroreflection at large incidence angles. Visual comparisons of retroreflection to specular first-surface reflection for four different retroreflective safety films using violet and green lasers suggest their retroreflection to be no greater than 0.09 at incidence angles up to 45°, and no greater than 0.30 at incidence angles of up to 70°. Attempts to produce a two-surface retroreflector with orthogonal mirror grooves by cutting and polishing an aluminum block indicate that residual surface roughness impedes retroreflection. Ongoing efforts focus on forming orthogonal surfaces with aluminized Mylar film, a material with very high specular reflectance across the solar spectrum. We investigated (1) folding or stamping a free film; (2) adhering the film to a pre-shaped substrate; or (3) attaching the film to a flat ductile substrate, then shaping. The latter two methods were more successful but yielded imperfect right angles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Urban Heat Island Mitigation · Building Energy and Comfort Optimization · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Cooling the cities - a review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments10.1016/j.solener.2012.07.003 ↗
2. Systematic comparison of the influence of cool wall versus cool roof adoption on urban climate in the Los Angeles basin10.1021/acs.est.8b00732 ↗
3. Global cooling: increasing world-wide urban albedos to offset CO210.1007/s10584-008-9515-9 ↗
4. Global cooling updates: reflective roofs and pavements10.1016/j.enbuild.2012.02.055 ↗
5. The long-term effect of increasing the albedo of urban areas
6. Revisiting the climate impacts of cool roofs around the globe using an Earth system model10.1088/1748-9326/11/8/084014 ↗
7. Regional climate consequences of large-scale cool roof and photovoltaic array deployment10.1088/1748-9326/6/3/034001 ↗
8. Modeling the climate impacts of deploying solar reflective cool pavements in California cities10.1002/2017JD026845 ↗
9. Observational evidence of neighborhood scale reductions in air temperature associated with increases in roof albedo10.3390/cli6040098 ↗
10. Energy and environmental consequences of a cool pavement campaign10.1016/j.enbuild.2017.03.051 ↗
11. Residential cooling loads and the urban heat island-the effects of albedo10.1016/0360-1323(88)90033-9 ↗
12. Potential benefits of cool roofs on commercial buildings: conserving energy, saving money, and reducing emission of greenhouse gases and air pollutants10.1007/s12053-008-9038-2 ↗
13. Potential benefits of cool walls on residential and commercial buildings across California and the United States: conserving energy, saving money, and reducing emission of greenhouse gases and air pollutants10.1016/j.enbuild.2019.02.028 ↗
14. Influence of street setbacks on solar reflection and air cooling by reflective streets in urban canyons10.1016/j.solener.2016.12.026 ↗
15. Using solar availability factors to adjust cool-wall energy savings for shading and reflection by neighboring buildings10.1016/j.solener.2019.01.023 ↗
16. Potential for application of retroreflective materials instead of highly reflective materials for urban heat island mitigation10.1155/2016/3626294 ↗
17. A side by side comparison of the cooling effect of building blocks with retro-reflective and diffuse-reflective walls10.1016/j.solener.2016.03.067 ↗
18. Beneficial effects of retroreflective materials in urban canyons: results from seasonal monitoring campaign10.1088/1742-6596/655/1/012012 ↗
19. Experimental evaluation of urban heat island mitigation potential of retro-reflective pavement in urban canyons10.1016/j.enbuild.2016.05.036 ↗
20. Method for measuring solar reflectance of retroreflective materials using emitting-receiving optical fiber
21. Application of glass beads as retro-reflective facades for urban heat island mitigation: experimental investigation and simulation analysis10.1016/j.buildenv.2016.05.039 ↗
22. Optical analysis of glass bead retro-reflective materials for urban heat island mitigation10.1016/j.solener.2016.03.011 ↗
23. Analysis of retro-reflective surfaces for urban heat island mitigation: a new analytical model10.1016/j.apenergy.2013.10.038 ↗
24. Retroreflective façades for urban heat island mitigation: experimental investigation and energy evaluations10.1016/j.apenergy.2015.01.129 ↗
25. Development and characterization of retro-reflective colored tiles for advanced building skins10.1016/j.enbuild.2017.08.078 ↗
26. Evaluation methods for retroreflectors and quantitative analysis of near-infrared upward reflective solar control window film—Part II: optical properties evaluation and verification results10.1016/j.solener.2017.03.025 ↗
27. Evaluation methods for retroreflectors and quantitative analysis of near-infrared upward reflective solar control window film—Part I: theory and evaluation methods10.1016/j.solener.2017.02.016 ↗
28. Effect of retro-reflecting transparent window on anthropogenic urban heat balance10.1016/j.enbuild.2017.01.051 ↗
29. Optic-energy performance improvement of exterior paints for buildings10.1016/j.enbuild.2017.01.060 ↗
30. Optimized retro-reflective tiles for exterior building element10.1016/j.scs.2017.11.007 ↗
31. Retroreflective materials for building's façades: experimental characterization and numerical simulations10.1016/j.solener.2018.06.073 ↗
32. Reduction of reflected heat of the sun by retroreflective materials
33. A method to measure retro-reflectance and durability of retro-reflective materials for building outer walls10.1177/1744259113517208 ↗
34. A study on the accuracy of determining the retro-reflectance of retro-reflective material by heat balance10.1016/j.solener.2015.08.040 ↗
35. Methods and instrumentation to measure the effective solar reflectance of fluorescent cool surfaces10.1016/j.enbuild.2016.11.007 ↗
36. ASTM International · 2017
37. Effect of retro-reflective materials on building indoor temperature conditions and heat flow analysis for walls10.1016/j.enbuild.2016.05.094 ↗
38. Development of a retro-reflective material as building coating and evaluation on albedo of urban canyons and building heat loads10.1016/j.enbuild.2015.06.055 ↗
39. Geometrical-optics analysis of reflective glass beads applied to building coatings10.1016/j.solener.2015.10.015 ↗
40. A study on the durability of a glass bead retro-reflective material applied to building facades10.1016/j.porgcoat.2018.03.009 ↗
41. Development of two new types of retroreflective materials as countermeasures to urban heat islands10.1007/s10765-017-2266-y ↗
42. Measuring solar reflectance—Part I: defining a metric that accurately predicts solar heat gain10.1016/j.solener.2010.04.018 ↗
43. Duffie · 2006
44. National Renewable Energy Laboratory · 2018
45. National Renewable Energy Laboratory · 2018
46. Tu · 2018
47. ASTM International · 2012
48. Levinson · 2018
49. Georgia State University · 2018
50. ASTM International · 2018
51. Polyanskiy · 2018
52. International Organization for Standardization · 2003
53. ASTM International · 2015