journal article·2018-03

Rheology of Solar-Salt based nanofluids for concentrated solar power. Influence of the salt purity, nanoparticle concentration, temperature and rheometer geometry

Belén Muñoz-Sánchez, Javier Nieto-Maestre, Elisabetta Veca, Raffaele Liberatore, Salvatore Sau, Helena Navarro, Yulong Ding, Nuria Navarrete, J. Enrique Juliá, Ángel G. Fernández, Ana García-Romero

Publisher page

Abstract

Abstract Solar Salt-based nanofluids have attracted significant scientific interest in recent years due to their improved thermal properties, making them strong candidates as thermal energy storage materials and/or heat transfer fluids in CSP plants. There have been reports on increased specific heat due to the addition of nanoparticles, however, there is a lack of comprehensive information on other essential properties affecting the heat transfer, such as the viscosity. This article concerns the rheological behaviour of nanofluids made of Solar Salt (mass percentage at 60% NaNO3 – 40% KNO3) as the base fluid and silica or alumina nanoparticles as additives. The evolution of these nanofluids viscosity as a function of the shear rate (1–1000 s−1) at a temperature range of 250–400 °C was measured and analysed. The impact of the salt purity (refined or industrial grade), the nanoparticle concentration (0.5–1.5 wt%) and the rheometer measuring configuration (coaxial cylinder or parallel plate) are examined. The results showed in general a Newtonian behaviour of the nanofluids with independency of the rheometer configuration. The relationship between the viscosity and the temperature follows an Arrhenius model. The influence of the nanoparticle concentration on the viscosity of the refined grade Solar Salt is analysed according to the Maron-Pierce and Kriegher-Dougherty models for the nanofluids containing alumina and silica nanoparticles respectively, due to their different shape.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems · Phase Change Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Review and comparison of different solar energy technologies, annual report
2. Solar thermal energy production: guidelines and future programmes of Enea
3. Economic assessment of concentrated solar power technologies: a review10.1016/j.rser.2017.01.006 ↗
4. R. Musi, B. Grange, S. Sgouridis, R. Guedez, P. Armstrong, A. Slocum, N. Calvet, Techno-Economic Analysis of Concentrated Solar Power Plants in Terms of Levelized Cost of Electricity, 160018, 2017, p. 160018. 〈http://dx.doi.org/10.1063/1.4984552〉.10.1063/1.4984552 ↗
5. Concentrating solar thermal technologies
6. Estela, Greenpeace, SolarPACES, Solar Thermal Electricity – Global Outlook 2016, 2016, p. 114.
7. Solar thermal gains in UAE, Spain, and California
8. Concentrating solar thermal power and thermochemical fuels10.1039/c2ee21275g ↗
9. Annual comparative performance and cost analysis of high temperature, sensible thermal energy storage systems integrated with a concentrated solar power plant10.1016/j.solener.2017.05.044 ↗
10. FactSage thermochemical software and databases, 2010–201610.1016/j.calphad.2016.05.002 ↗
11. Thermodynamic evaluation of phase equilibria in NaNO3-KNO3 system10.1361/105497103770330091 ↗
12. Thermal energy storage – overview and specific insight into nitrate salts for sensible and latent heat storage10.3762/bjnano.6.154 ↗
13. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
14. Improving the thermal properties of ternary carbonates for concentrating solar power through simple chemical modifications by adding sodium hydroxide and nitrate10.1016/j.solmat.2014.01.025 ↗
15. Improving the thermal properties of NaNO3-KNO3 for concentrating solar power by adding additives10.1016/j.solmat.2016.10.013 ↗
16. Techno-economic comparison between CSP plants presenting two different heat transfer fluids10.1016/j.apenergy.2016.01.066 ↗
17. An investigation into the thermophysical and rheological properties of nanofluids for solar thermal applications10.1016/j.rser.2015.10.065 ↗
18. Specific heat control of nanofluids: a critical review10.1016/j.ijthermalsci.2016.03.024 ↗
19. Increment of specific heat capacity of solar salt with SiO2 nanoparticles10.1186/1556-276X-9-582 ↗
20. R. Mondragon, L. Hernandez, L. Cabedo, S. Torro, J.E. Julia, Increment of specific heat of Solar Salt with SiO2 and Al2O3 nanoparticles, in: Proceedings of the Eurotherm Semin, #99. Adv. Therm. Energy Storage, 2014, pp. 1–9.10.1186/1556-276X-9-582 ↗
21. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
22. Specific heat of nanofluids synthesized by dispersing alumina nanoparticles in alkali salt eutectic10.1016/j.ijheatmasstransfer.2014.02.066 ↗
23. Lasfargues · 2014
24. A comparative review on the specific heat of nanofluids for energy perspective10.1016/j.rser.2014.05.081 ↗
25. Enhancement of specific heat capacity of high-temperature silica-nanofluids synthesized in alkali chloride salt eutectics for solar thermal-energy storage applications10.1016/j.ijheatmasstransfer.2010.11.017 ↗
26. Effect of formation of “long range” secondary dendritic nanostructures in molten salt nanofluids on the values of specific heat capacity10.1016/j.ijheatmasstransfer.2015.05.072 ↗
27. Heat capacity of nanofluids for solar energy storage produced by dispersing oxide nanoparticles in nitrate salt mixture directly at high temperature10.1016/j.solmat.2017.04.011 ↗
28. Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage10.1016/j.solmat.2008.11.057 ↗
29. Preparation and thermal properties of quaternary mixed nitrate with low melting point10.1016/j.solmat.2014.03.056 ↗
30. Novel low melting point binary nitrates for thermal energy storage applications10.1016/j.solmat.2017.02.021 ↗
31. Jung · 2012
32. Viscosity measurements of multi-walled carbon nanotubes-based high temperature nanofluids10.1016/j.matlet.2014.02.032 ↗
33. Rheological Analysis of Binary Eutectic Mixture of Sodium and Potassium Nitrate and the Effect of Low Concentration CuO Nanoparticle Addition to Its Viscosity
34. B. Jo, S. Jung, D. Shin, D. Banerjee, Anomalous rheological behavior of complex fluids (nanofluids), in: Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, 2011, pp. 1–6. 〈http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1643833〉. (Accessed 14 January 2016).10.1115/IMECE2011-64091 ↗
35. Triantafillopoulos · 2000
36. Tadros · 2010
37. Nanofluids for heat transfer enhancement – a review
38. Viscosity of nanofluids: a review of recent experimental studies10.1016/j.icheatmasstransfer.2016.02.005 ↗
39. Comment on “Viscosity measurements of multi-walled carbon nanotubes-based high temperature nanofluids”10.1016/j.matlet.2014.09.139 ↗
40. Viscosity of binary mixtures of molten nitrates as a function of ionic radius—II10.1016/0013-4686(69)87037-4 ↗
41. Molten salts: volume 3, nitrates, nitrites and mixtures10.1063/1.3253103 ↗
42. Thermophysical properties of the equimolar mixture NaNO3-KNO3 from 300 to 600°C10.1021/je00029a012 ↗
43. K. Coscia, S. Neti, A. Oztekin, S. Nelle, S. Mohapatra, T. Elliott, The thermophysical properties of the NaNO3-KNO3, LiNO3-NaNO3, and LiNO3-KNO3 systems, in: Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2012.10.1115/IMECE2011-64465 ↗
44. Accurate viscosity measurement of nitrates/nitrites salts for concentrated solar power10.1016/j.solener.2016.08.037 ↗
45. Molten salts database for energy applications10.1016/j.cep.2013.07.008 ↗
46. A.B. Zavoico, Solar Power Tower – Design Basis Document, Tech. Rep. SAND2001-2100, 2001, p. 148. 〈http://dx.doi.org/10.2172/786629〉.10.2172/786629 ↗
47. L. Kawaken Fine Chemicals Co., Main features of Alumisol - 10A, (n.d.).
48. Preparation of nanofluids based on solar salt and boehmite nanoparticles: Characterization of starting materials10.1063/1.4949128 ↗
49. W.R.G.& Co.-Conn., LUDOX® Colloidal Silica in Catalyst Applications, 2015.
50. The influence of mixing water on the thermophysical properties of nanofluids based on solar salt and silica nanoparticles10.1063/1.4949129 ↗
51. B.E. Laboratories, Brookfield DV-III Ultra Instructions, n.d.
52. Errors in parallel-plate and cone-plate rheometer measurements due to sample underfill10.1088/0957-0233/26/1/015301 ↗
53. R. Shaw, Dynamic Light Scattering Training: Achieving Reliable Nano Particle Sizing, 2013. 〈http://scholar.google.com/scholar?hl=en&btnG=Search&q=intitle:Dynamic+Light+Scattering+Training+Achieving+reliable+nano+particle+sizing#0〉. (Accessed 27 December 2016).
54. Chhabra · 2008
55. The effect of Brownian motion on the bulk stress in a suspension of spherical particles10.1017/S0022112077001062 ↗
56. Molten salts: volume 3 nitrates, nitrites, and mixtures: electrical conductance, density, viscosity, and surface tension data10.1063/1.3253103 ↗