journal article·2018-01

High-temperature air-stable solar selective coating based on MoSi2–Si3N4 composite

Adrián Rodríguez-Palomo, Eva Céspedes, David Hernández-Pinilla, Carlos Prieto

Publisher page

Abstract

The thermal stability in air of solar selective coatings based on the novel MoSi2–Si3N4 hybrid composite has been investigated here for the first time. Although thermal stability of solar absorbers is typically examined under vacuum, high temperature air stability is required for practical applications in concentration solar power (CSP) technologies: solar tower systems receivers operate in air and, on the other hand, air stability is highly preferred in parabolic trough collector systems due to occasionally undesired losses of vacuum conditions. In this work, the effect of different layers combination, prepared by sputtering, on the optical performance after high temperature annealing has been investigated. Two different standard substrates (stainless steel and Inconel) have been explored. It is shown that silver layer, typically used in SSC as IR reflector, strongly affects the stack thermal stability in air, leading to important degradation. For SSC stacks with the Inconel/MoSi2-Si3N4/Si3N4 structure (onto Inconel substrate), a good thermal stability in air is obtained, leading to just a slight variation of the absorptivity after air annealing at 600 °C, probably due to partial Si3N4 oxidation. Best optical performance is achieved for the Inconel substrate, using and additional Al2O3 barrier on top, comprising the stack the following structure: Inconel/MoSi2-Si3N4/Si3N4/Al2O3. This combination exhibits very good optical performance, even after annealing at 700 °C in air. The Performance Criterion (PC) according to the International Energy Agency, evaluated after successive air annealing cycles of 100 h at 600 °C, gets 0.02, which is considerably smaller than 0.05, fulfilling this material the PC for practical applications. Our results evidence that the MoSi2–Si3N4 absorber deposited onto Inconel substrate and capped with a Si3N4/Al2O3 layer on top (acting as antireflective and protective barrier) is a very promising selective coating for solar receivers operating in air at temperatures about 600 °C
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- to high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. Coatings for concentrating solar systems – a review10.1016/j.rser.2015.01.015 ↗
3. Parabolic-trough solar collectors and their applications10.1016/j.rser.2010.03.012 ↗
4. Review of mid- to high- temperature solar selective absorber materials, NREL/TP-520–31267
5. Ultrafine chromium particles for photothermal conversion of solar-energy10.1063/1.325263 ↗
6. New cermet film structures with much improved selectivity for solar thermal applications10.1063/1.106602 ↗
7. High solar performance selective surface using bi-sublayer cermet film structures10.1016/0927-0248(92)90089-8 ↗
8. Towards understanding the superior properties of transition metals oxynitrides prepared by reactive DC magnetron sputtering10.1016/j.tsf.2005.07.280 ↗
9. Solar energy conversion: solid state physics aspects
10. Fabrication and optimization of highly efficient cermet-based spectrally selective coatings for high temperature10.1016/j.tsf.2009.03.191 ↗
11. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
12. High-temperature optical properties and stability of AlxOy–AlNx–Al solar selective absorbing surface prepared by DC magnetron reactive sputtering10.1016/S0927-0248(02)00361-6 ↗
13. Polychromic Al–AlN cermet solar absorber coating with high absorption efficiency and excellent durability10.1016/j.solmat.2015.07.049 ↗
14. Novel Mo–Si3N4 based selective coating for high temperature concentrating solar power applications10.1016/j.solmat.2013.12.005 ↗
15. Performance and stability of some new high-temperature selective absorber systems based on metal/dielectric multilayers10.1016/0927-0248(94)90001-9 ↗
16. Preparation and spectral properties of solar selective absorbing MoSi2–Al2O3 coating10.1002/pssa.201330658 ↗
17. Effects of the LMVF and HMVF absorption layer thickness and metal volume fraction on optical properties of the MoSi2-Al2O3 solar selective absorbing coating10.1016/j.vacuum.2014.01.022 ↗
18. MoSi2–Si3N4 absorber for high temperature solar selective coating10.1016/j.solmat.2016.04.001 ↗
19. Effect of the optical properties of the coating of a concentrated solar power central receiver on its thermal efficiency10.1016/j.solmat.2016.08.031 ↗
20. Characterization of pyromark 2500 paint for high temperature solar receivers10.1115/1.4024031 ↗
21. Levelized cost of energy (LCOE) metric to characterize solar absorber coatings for the CSP industry10.1016/j.renene.2015.06.059 ↗
22. Ni-Al2O3 selective cermet coatings for photothermal conversión up to 500°C10.1016/0040-6090(89)90914-0 ↗
23. Optical properties of selectively absorbing r.f. sputtered Ni-Al2O3 composite films10.1016/0040-6090(91)90256-W ↗
24. Study of the stability of a selective solar absorber coating under air and high temperature conditions10.1016/j.egypro.2015.03.107 ↗
25. Optical properties and thermal stability of pulsed sputter deposited AlxOy/Al/Al2O3 multilayer absorber coatings10.1016/j.solmat.2008.11.005 ↗
26. Preparation and thermal stability on non-vacuum high temperature solar selective absorbing coatings10.1007/s11434-009-0159-6 ↗
27. Structure and thermal stability of spectrally selective absorber based on AlCrON coating for solar-thermal conversion applications10.1016/j.solmat.2016.05.035 ↗
28. Spectral reflectance data of a high temperature stable solar selective coating based on MoSi2–Si3N410.1016/j.dib.2016.04.040 ↗
29. W. Theiss, Hard- and Software for Optical Spectroscopy 〈www.mtheiss.com〉 (Accessed December).
30. Deposition of silicon oxynitride thin-films by remote plasma enhanced chemical vapor-deposition10.1116/1.574902 ↗
31. Mechanical properties of sputtered silicon nitride thin films10.1063/1.1626799 ↗
32. Advanced procedure for the assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
33. EN 12975-3-1, Thermal solar systems and components – solar collectors – Part 3-1: Qualification of solar absorber surface durability, November, 2011.
34. ISO 22975-3 Solar energy – collector components and materials – Part 3: absorber surface durability, 2014.