Interplay between surface preparation and device performance in CZTSSe solar cells: Effects of KCN and NH4OH etching
Source abstract
Abstract
Abstract Despite the many similarities between Cu2ZnSn(S,Se)4 (CZTSSe) and Cu(In,Ga)(S,Se)2 materials and device architecture, open questions remain about the optimal surface preparation steps for CZTSSe absorbers, including whether differences exist for absorber layers deposited by different methods. In this work, we investigate KCN etching and NH4OH treatment as surface preparation methods for the absorber/CdS interface for two-stage processed CZTSSe and co-evaporated CZTSe absorber layers. Ambient-exposed, thus oxidized and contaminated, thin film absorbers are utilized to examine the effectiveness of these surface preparation methods and to elucidate their effects on device performance. Topography and surface potential images simultaneously obtained by Kelvin probe force microscopy (KPFM) show the existence of an overlayer on the ambient-exposed absorbers. Moreover, KPFM results also demonstrate that although NH4OH treatment removes much of the overlayer from the CZTSSe surface, KCN etching removes the overlayer completely. In addition, differences in the deposited CdS layer and depletion region width result depending on the surface preparation method, with the NH4OH-treated solar cells having narrower depletion region. This is reflected in device results in which KCN-etched solar cells outperform their NH4OH-treated counterparts due to increases in external quantum efficiency at long wavelengths and in open circuit voltage. KPFM measurements also demonstrate that grain boundaries (GBs) in the KCN-etched two-stage processed CZTSSe thin films are either negatively charged or neutral. On the other hand, KCN etching makes the surface almost equipotential in the co-evaporated CZTSe thin film by causing disappearance of positively charged GBs that existed before etching.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. Preparation and evaluation of Cu2ZnSnS4 thin films by sulfurization of E-B evaporated precursors10.1016/S0927-0248(97)00119-0 ↗
3. Existence and removal of Cu2Se second phase in coevaporated Cu2ZnSnSe4 thin films10.1063/1.3691964 ↗
4. Cu2−xS surface phases and their impact on the electronic structure of CuInS2 thin films-a hidden parameter in solar cell optimization10.1002/aenm.201200946 ↗
5. Development of a Selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
6. Cu-rich precursors improve kesterite solar cells10.1002/aenm.201300543 ↗
7. Electronic properties of grain boundaries in Cu(In,Ga)Se2 thin films with various Ga-contents10.1016/j.solmat.2012.04.002 ↗
8. K. Timmo, M. Altosaar, J. Raudoja, M. Grossberg, M. Danilson, O. Volobujeva, E. Mellikov, Chemical etching of Cu2ZnSn(S,Se)4 monograin powder, in: Proceedings of the Photovoltaic Specialists Conference (PVSC), 2010 35th IEEE. (2010) 001982–001985.10.1109/PVSC.2010.5616411 ↗
9. Impact of KCN etching on the chemical and electronic surface structure of Cu2ZnSnS4 thin-film solar cell absorbers10.1063/1.3650717 ↗
10. Cliff-like conduction band offset and KCN-induced recombination barrier enhancement at the CdS/Cu2ZnSnS4 thin-film solar cell heterojunction10.1063/1.3663327 ↗
11. Scheer · 2011
12. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
13. Influence of S/Se ratio on series resistance and on dominant recombination pathway in Cu2ZnSn(SSe)4 thin film solar cells10.1016/j.tsf.2012.11.111 ↗
14. The state and future prospects of kesterite photovoltaics10.1039/c3ee41781f ↗
15. Valence band offset at the CdS/Cu2ZnSnS4 interface probed by x-ray photoelectron spectroscopy10.1088/0022-3727/46/17/175101 ↗
16. Compositional dependence of structural and electronic properties of Cu2ZnSn(S,Se)4 alloys for thin film solar cells10.1103/PhysRevB.83.125201 ↗
17. Band alignments of different buffer layers (CdS, Zn(O,S), and In2S3) on Cu2ZnSnS410.1063/1.4873715 ↗
18. The band offset at CdS/Cu2ZnSnS4 heterojunction interface10.1007/s13391-012-2023-0 ↗
19. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
20. Efficiency limitations for wide-band-gap chalcopyrite solar cells10.1016/j.tsf.2004.11.018 ↗
21. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
22. Cu(InGa)Se2 Solar Cells
23. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
24. Dielectric function spectra and critical-point energies of Cu2ZnSnSe4 from 0.5 to 9.0eV10.1063/1.3681814 ↗
25. V. Chawla, B. Clemens, Effect of composition on high efficiency CZTSSe devices fabricated using co-sputtering of compound targets, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference (PVSC), 2012 .(2012) 002990-002992.10.1109/PVSC.2012.6318212 ↗
26. Veeco, Instruction Manual, Dimension Icon with ScanAsyst, 004-1023-000, Revision F, 2010.
27. Experimental technique and working modes
28. Electrical modification in Cu(In,Ga)Se2 thin films by chemical bath deposition process of CdS films10.1063/1.1856217 ↗
29. Veeco, User Guide, diNanoScope Software 8.10, 004-1025-000, Revision C, (2010).
30. Influence of KCN treatment on CuInS2 thin films10.1016/0169-4332(95)00236-7 ↗
31. Native oxidation and Cu-poor surface structure of thin film Cu2ZnSnS4 solar cell absorbers10.1063/1.3637574 ↗
32. Impact of environmental conditions on the chemical surface properties of Cu(In,Ga)(S,Se)2 thin-film solar cell absorbers10.1063/1.4876257 ↗
33. Nelson · 2003
34. Influence of the thickness on structural, optical and electrical properties of chemical bath deposited CdS thin films10.1016/S0927-0248(02)00283-0 ↗
35. Temperature dependent conductivity of polycrystalline Cu2ZnSnS4 thin films10.1063/1.4731875 ↗
36. Structure and electronic properties of grain boundaries in earth-abundant photovoltaic absorber Cu2ZnSnSe410.1021/nn203230g ↗
37. Engineering grain boundaries in Cu2ZnSnSe4 for better cell performance: a first-principle study10.1002/aenm.201300712 ↗
38. T. Gershon, B. Shin, N. Bojarczuk, M. Hopstaken, D.B. Mitzi, S. Guha, The role of sodium as a surfactant and suppressor of non-radiative recombination at internal surfaces in Cu2ZnSnS4, Advanced Energy Materials. doi: 10.1002/aenm.20140084910.1002/aenm.201400849 ↗
39. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
40. Surface potential on grain boundaries and intragrains of highly efficient Cu2ZnSn(S,Se)4 thin-films grown by two-step sputtering process10.1016/j.solmat.2014.04.019 ↗
41. Investigation of micro-electrical properties of Cu2ZnSnSe4 thin films using scanning probe microscopy10.1016/j.solmat.2014.08.046 ↗
42. Symmetry-dependence of electronic grain boundary properties in polycrystalline CuInSe2 thin films10.1063/1.3652915 ↗
43. Kesterite successes, ongoing work, and challenges: a perspective from vacuum deposition10.1109/JPHOTOV.2012.2215842 ↗