journal article·2014-01

Effect of light induced degradation on electrical transport and charge extraction in polythiophene:Fullerene (P3HT:PCBM) solar cells

S. Khelifi, E. Voroshazi, D. Spoltore, F. Piersimoni, S. Bertho, T. Aernouts, J. Manca, J. Lauwaert, H. Vrielinck, M. Burgelman

Publisher page

Abstract

We investigate the photodegradation in inert atmosphere of (poly 3-hexylthiophene:[6,6]-phenyl-C61-butyric acid methyl ester) (P3HT:PCBM) heterojunction solar cells under continuous illumination using advanced electrical characterization and a device modeling tool. Our results indicate that different failure mechanisms contribute to the performance loss. The first 250 h of illumination induced p-type doping and recombination related to traps in the blend which mainly decreases the short-circuit current and the efficiency of the cells. Device modeling and simulation allowed us to prove that increased p-type doping of the blend provoke the loss in the short-circuit current and the quantum efficiency by simultaneous reduction of charge carrier mobility and the electric field together with a shrink of the space charge region. Transmission electron microscopy (TEM) measurements reveal a change in the blend morphology upon long illumination times manifested by phase segregation in the blend. The reduction in the open-circuit voltage is reported to be related to a slight reduction of the charge transfer energy (CT) upon 700 h of illumination aging. The final failure mechanism was a rapid drop in the fill factor which occurs upon 1000 h of illumination and manifested by the appearance of an S-shape J–V characteristic. This failure mechanism is linked to the reduction of charge extraction caused by a reduced surface recombination velocity at the contacts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Stability of polymer solar cells10.1002/adma.201104187 ↗
2. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene)(P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
3. Wavelength-dependent pathway of poly-3-hexylthiphene photo-oxidation
4. Defect engineering in π-conjugated polymers
5. Influence of moisture on device characteristics of polythiophene-based field-effect transistors10.1063/1.1691190 ↗
6. Interaction of oxygen with conjugated polymers: charge transfer complex formation with poly (3-alkylthiophenes)10.1021/ja964229j ↗
7. Photoimpedance spectroscopy of poly (3-hexylthiophene) metal–insulator–semiconductor diodes10.1016/j.synthmet.2003.07.006 ↗
8. Dopant density determination in disordered organic field-effect transistors
9. Dynamics and reversibility of oxygen doping and de-doping for conjugated polymer
10. Hole doping by molecular oxygen in organic semiconductors: band-structure calculations10.1103/PhysRevB.75.235206 ↗
11. Photoinduced degradation of polymer and polymer–fullerence active layers: experiment and theory10.1002/adfm.201001079 ↗
12. Long-term operational lifetime and degradation analysis of P3HT:PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
13. Light-induced degradation of P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗
14. Investigation of defects by admittance spectroscopy measurements in poly(3-hexylthiophene)(6:6)-phenyl C61-butyric acid methyl ester organic solar cells degraded under air exposure10.1063/1.3658023 ↗
15. Modeling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
16. Electron–hole recombination statistics in semiconductors through flaws with many charge conditions10.1103/PhysRev.109.1103 ↗
17. Modeling multivalent defects in thin film solar cells10.1016/j.tsf.2010.12.039 ↗
18. Recombination via tail states in polythiophene: fullerene solar cells10.1103/PhysRevB.83.115209 ↗
19. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
20. Fourrier-transform photocurrent spectroscopy for a fast and highly sensitive spectral characterization of organic and hybrid solar cells10.1016/j.tsf.2007.12.056 ↗
21. Influence of fullerene ordering on the energy of the charge-transfer state and open-circuit voltage in polymer: fullerene solar cells10.1021/jp110982m ↗
22. A review of charge transport and recombination in polymer/fullerene organic solar cells10.1002/pip.791 ↗
23. Effect of polymer cristallinity in P3HT:PCBM solar cells on band gap trap states and apparent recombination order10.1002/aenm.201200674 ↗
24. Characterization of flexible thin film CIGSe solar cells grown on different metallic foil substrates10.1016/j.egypro.2010.07.017 ↗
25. S. Khelifi, J. Marlein, M. Burgelman, A. Belghachi, Electrical characteristics of Cu(In,Ga)Se2 thin films solar cells on metallic foil substrates, in: Proceeding of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain, 2008, pp. 2165-2169.
26. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunction10.1063/1.363401 ↗
27. Degradation and failure of MEH-PPV light-emitting diodes10.1063/1.361096 ↗
28. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
29. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
30. Exciton diffusion measurements in poly(3-hexylthiophene)10.1002/adma.200800982 ↗
31. Diffusion-limited recombination in polymer-fullerene blends and its influence on photocurrent collection10.1103/PhysRevB.67.155209 ↗
32. Bimolecular recombination losses in polythiophene:fullerene solar cells10.1103/PhysRevB.78.113201 ↗
33. Device modeling of nanostructured solar cells
34. Schropp · 1998
35. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
36. Dipole induced anomalous S-shape I–V curves in polymer solar cells10.1063/1.3117513 ↗
37. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I–V curves of organic solar cells10.1002/adfm.201002669 ↗
38. S-shaped current–voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗