Enhancing the performance of dye-sensitized solar cells by incorporating nanosilicate platelets in gel electrolyte
Source abstract
Abstract
Abstract Two kinds of gel-type dye-sensitized solar cells (DSSCs), composed of two types of electrolytes, were constructed and the respective cell performance was evaluated in this study. One electrolyte, TEOS-Triton X-100 gel, was based on a hybrid organic/inorganic gel electrolyte made by the sol–gel method and the other was based on poly(vinyidene fluoride-co-hexafluoro propylene) (PVDF-HFP) copolymer. TEOS-Triton X-100 gel was based on the reticulate structure of silica, formed by hydrolysis, and condensation of tetraethoxysilane (TEOS), while its organic subphase was a mixture of surfactant (Triton X-100) and ionic liquid electrolytes. Both DSSC gel-type electrolytes were composed of iodine, 1-propy-3-methyl-imidazolium iodide, and 3-methoxypropionitrile to create the redox couple of I 3 − /I − . Based on the results obtained from the I – V characteristics, it was found that the optimal iodine concentrations for the TEOS-Triton X-100 gel electrolyte and PVDF-HFP gel electrolyte are 0.05 M and 0.1 M, respectively. Although the increase in the iodine concentration could enhance the short-circuit current density ( J SC ), a further increase in the iodine concentration would reduce the J SC due to increased dark current. Therefore, the concentration of I 2 is a significant factor in determining the performance of DSSCs. In order to enhance cell performance, the addition of nanosilicate platelets (NSPs) in the above-mentioned gel electrolytes was investigated. By incorporating NSP-Triton X-100 into the electrolytes, the J SC of the cells increased due to the decrease of diffusion resistance, while the open circuit voltage ( V OC ) remained almost the same. As the loading of the NSP-Triton X-100 in the TEOS-Triton X-100 gel electrolyte increased to 0.5 wt%, the J SC and the conversion efficiency increased from 8.5 to 12 mA/cm 2 and from 3.6% to 4.7%, respectively. However, the J SC decreased as the loading of NSP-Triton X-100 exceeded 0.5 wt%. At higher NSP-Triton X-100 loading, NSPs acted as a barrier interface between the electrolyte and the dye molecules, hindering electron transfer, hence, reducing the cell's photocurrent density. The same behavior was also observed in the PVDF-HFP gel electrolyte DSSC system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. 19.8% efficient “honeycomb” textured multicrystalline and 24.4% monocrystalline silicon solar cells10.1063/1.122345 ↗
2. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
3. In situ preparation of poly(ethylene oxide)–SiO2 composite polymer electrolytes10.1016/j.jpowsour.2003.11.026 ↗
4. Poly(butyl acrylate)/NaI/I2 electrolytes for dye-sensitized nanocrystalline TiO2 solar cells10.1016/j.ssi.2004.10.002 ↗
5. A Solid State, dye sensitized photoelectrochemical cell10.1021/j100047a003 ↗
6. Gel polymer electrolytes based on polyacrylonitrile and a novel quaternary ammonium salt for dye-sensitized solar cells10.1016/j.materresbull.2004.07.004 ↗
7. A novel gel polymer electrolyte based on polyacrylonitrile (PAN) and its application in a solar cell10.1016/S0025-5408(02)00712-2 ↗
8. Dye-sensitised photoelectrochemical solar cells with polyacrylonitrile based solid polymer electrolytes10.1016/S0013-4686(02)00166-4 ↗
9. Photoelectrochemical solar cells with polyacrylonitrile-based and polyethylene oxide-based polymer electrolytes10.1016/j.solmat.2004.02.040 ↗
10. Gel polymer electrolytes based on a novel quaternary ammonium salt for dye-sensitized solar cells10.1023/B:JACH.0000015622.11471.41 ↗
11. Quasi-solid-state dye-sensitized solar cells with siloxane poly(ethylene glycol) hybrid gel electrolyte10.1088/0268-1242/21/5/023 ↗
12. Dye-sensitized solar cells employing a highly conductive and mechanically robust nanocomposite gel electrolyte10.1016/j.synthmet.2004.04.011 ↗
13. Integrated chemical systems: photocatalysis at titanium dioxide incorporated into Nafion and clay10.1021/j100267a003 ↗
14. Nafion modified TiO2 electrodes: photoresponse and sensitization by Ru(II)-bipyridyl complexes10.1016/0013-4686(89)85029-7 ↗
15. Polymer/layered silicate nanocomposites: a review frompreparation to processing10.1016/j.progpolymsci.2003.08.002 ↗
16. Exfoliation of montmorillonite clay by mannich polyamines with multiple quaternary salts10.1021/ma0503716 ↗
17. One-step exfoliation of montmorillonite via phase inversion of amphiphilic copolymer emulsion10.1021/ma047761x ↗
18. A quasi-solid-state dye-sensitized solar cell based on a sol–gel nanocomposite electrolyte containing ionic liquid10.1021/cm0213568 ↗
19. Influence of electrolytes on the photovoltaic performance of organic dye-sensitized nanocrystalline TiO2 solar cells10.1016/S0927-0248(01)00019-8 ↗
20. Photocurrent-determining processes in quasi-solid-state dye-sensitized solar cells using ionic gel electrolytes10.1021/jp034248x ↗
21. High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyte10.1039/B209322G ↗