journal article·2022-05

Fabrication and characteristics of eutectic hydrated salts/fumed silica composite as form-stable phase change materials for thermal energy storage

Rongda Ye, Hong Jiang, Jun Wang, Xunan Yang, Xugang Shu

Publisher page

Abstract

In this research, a novel form-stable composite phase change material (PCM) for building envelopes was prepared and evaluated. Calcium chloride hexahydrate (CCH) and magnesium nitrate hexahydrate (MNH) were dissolved and mixed uniformly to obtain the binary eutectic hydrated salt (BEHS) with adjustable phase change temperature. With the increase of MNH content, the phase change temperature and latent heat of BEHS gradually decreased. The BEHS with the onset temperature and peak temperature of 21.26 °C and 27.51 °C and corresponding latent heat of 142.4 J/g was selected as the PCM and combined with the support material SiO 2 to obtain BEHS/SiO 2 composite PCMs,where the minimum SiO 2 content to prevent BEHS from leaking was 25 wt%. The characterization results of SEM, XRD and FT-IR indicated that BEHS was successfully filled into the pore structure of SiO 2 , and there was good compatibility between them. By adding 2.5 wt% strontium chloride hexahydrate as a nucleating agent, the supercooling degree of BEHS/SiO 2 composite PCMs was eliminated. The onset temperature and peak temperature of BEHS/SiO 2 composite PCMs were measured to be 17.85 °C and 27.28 °C, respectively, and the corresponding latent heat was 97.3 J/g. A 300 melting and solidification cycles test proved that it possessed good thermal reliability. Moreover, the numerical simulation was performed to evaluate the effect of BEHS/SiO 2 composite PCMs on the thermal performance and energy performance of the building. The obtained results showed that composite PCMs could effectively reduce room temperature fluctuations and energy consumption.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Analysis of the embodied carbon dioxide in the building sector: a case of China10.1016/j.jclepro.2020.122438 ↗
2. Spatial disparity and hierarchical cluster analysis of final energy consumption in China10.1016/j.energy.2020.117195 ↗
3. Residential net-zero energy buildings: review and perspective10.1016/j.rser.2021.110859 ↗
4. Xu · 2020 · 110398
5. Phase change material thermal energy storage systems for cooling applications in buildings: a review10.1016/j.rser.2019.109579 ↗
6. Investigation of heat transfer of a building wall in the presence of phase change material (PCM)10.1016/j.enbenv.2020.01.002 ↗
7. Experimental study on thermal performance improvement of building envelopes by integrating with phase change material in an intermittently heated room10.1016/j.scs.2018.01.040 ↗
8. Thermal reliability of typical fatty acids as phase change materials based on 10,000 accelerated thermal cycles10.1016/j.scs.2018.12.008 ↗
9. Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes10.1016/j.enconman.2016.12.053 ↗
10. Sun · 2020
11. Flame-retardancy and thermal properties of a novel phosphorus-modified PCM for thermal energy storage10.1016/j.cej.2019.122500 ↗
12. Development of polyurethane acrylate coated salt hydrate/diatomite form-stable phase change material with enhanced thermal stability for building energy storage10.1016/j.conbuildmat.2020.119714 ↗
13. Development of a stable inorganic phase change material for thermal energy storage in buildings10.1016/j.solmat.2020.110420 ↗
14. Experimental investigation on the thermal performance of double-layer PCM radiant floor system containing two types of inorganic composite PCMs10.1016/j.enbuild.2020.109806 ↗
15. Enhanced thermal properties of hydrate salt/poly (acrylate sodium) copolymer hydrogel as form-stable phase change material via incorporation of hydroxyl carbon nanotubes10.1016/j.solmat.2019.110387 ↗
16. Phase change behavior of latent heat storage media based on calcium chloride hexahydrate composites containing strontium chloride hexahydrate and oxidation expandable graphite10.1016/j.applthermaleng.2016.03.098 ↗
17. Tuning of thermal properties of sodium acetate trihydrate by blending with polymer and silver nanoparticles10.1016/j.applthermaleng.2013.09.049 ↗
18. Use of nano-α-Al2O3 to improve binary eutectic hydrated salt as phase change material10.1016/j.solmat.2016.09.050 ↗
19. Salt hydrate/expanded vermiculite composite as a form-stable phase change material for building energy storage10.1016/j.solmat.2018.09.016 ↗
20. Hydrated salts/expanded graphite composite with high thermal conductivity as a shape-stabilized phase change material for thermal energy storage10.1016/j.enconman.2015.05.006 ↗
21. Experimental study on thermal properties and thermal performance of eutectic hydrated salts/expanded perlite form-stable phase change materials for passive solar energy utilization10.1016/j.solmat.2018.08.012 ↗
22. Thermal properties enhancement and application of a novel sodium acetate trihydrate-formamide/expanded graphite shape-stabilized composite phase change material for electric radiant floor heating10.1016/j.applthermaleng.2019.01.069 ↗
23. The preparation, characterization and modification of a new phase change material: CaCl2·6H2O–MgCl2·6H2O eutectic hydrate salt10.1016/j.solmat.2014.03.031 ↗
24. Corrosion assessment of promising hydrated salts as sorption materials for thermal energy storage systems10.1016/j.renene.2020.01.001 ↗
25. Microinfiltration of Mg (NO3) 2· 6H2O into g-C3N4 and macroencapsulation with commercial sealants: a two-step method to enhance the thermal stability of inorganic composite phase change materials10.1016/j.apenergy.2019.113540 ↗
26. Fabrication and characteristics of composite phase change material based on Ba(OH)2·8H2O for thermal energy storage10.1016/j.solmat.2017.12.032 ↗
27. Supercooling suppression and thermal conductivity enhancement of Na2HPO4·12H2O/expanded vermiculite form-stable composite phase change materials with alumina for heat storage10.1021/acssuschemeng.8b00631 ↗
28. Preparation and properties of phase change temperature-tuned composite phase change material based on sodium acetate trihydrate–urea/fumed silica for radiant floor heating system10.1016/j.applthermaleng.2019.114253 ↗
29. MgCl2· 6H2O-Mg (NO3) 2· 6H2O eutectic/SiO2 composite phase change material with improved thermal reliability and enhanced thermal conductivity10.1016/j.solmat.2017.07.019 ↗
30. Preparation of hydrophobic lauric acid/SiO2 shape-stabilized phase change materials for thermal energy storage10.1016/j.est.2018.12.022 ↗
31. Preparation and properties of capric-stearic acid/White Carbon Black composite for thermal storage in building envelope10.1016/j.enbuild.2017.09.076 ↗
32. Shape-stabilized phase change composite by impregnation of octadecane into mesoporous SiO210.1016/j.solmat.2015.07.028 ↗
33. Thermal properties and thermal conductivity enhancement of composite phase change material using sodium acetate trihydrate–urea/expanded graphite for radiant floor heating system10.1016/j.applthermaleng.2018.04.102 ↗
34. Preparation and thermal energy storage studies of CH3COONa·3H2O–KCl composites salt system with enhanced phase change performance10.1016/j.applthermaleng.2016.04.029 ↗
35. Preparation and thermal properties of NaOAc· 3H2O-CO (NH2) 2 non-eutectic binary mixture PCM for radiant floor heating system10.1016/j.applthermaleng.2019.114820 ↗