journal article·2019-09Open access

Implementing transparent conducting oxides by DC sputtering on ultrathin SiOx / poly-Si passivating contacts

Leonard Tutsch, Frank Feldmann, Jana Polzin, Christoph Luderer, Martin Bivour, Anamaria Moldovan, Jochen Rentsch, Martin Hermle

Abstract

This work addresses the development of transparent conductive oxides (TCOs) for Si solar cells featuring SiOx/poly-Si based passivating contacts. Minimizing the thickness of the parasitically absorbing poly-Si layer is essential to reduce losses in the generation of current. However, as the poly-Si shields the critical absorber surface region during the sputter process of an overlying TCO film, the degradation in passivation quality is more severe for poly-Si films below 20 nm. For a thermal annealing of this sputter damage, a trade-off between improved surface passivation and the formation of a transport barrier exists, which needs to be considered for contact engineering. By adjusting the DC sputter process and the subsequent curing procedure, effective passivation recovery of textured samples featuring ultrathin (<15 nm) n-type poly-Si carrier selective layers (iVoc of 735 mV) and a low ρc of 50 mΩcm2 of the c-Si/SiOx/poly-Si/TCO contact could be achieved simultaneously. Combining this process with a highly conductive and broadband transparent cerium and hydrogen co-doped indium oxide film, opens the door for the application of ultrathin poly-Si layers on the front side of silicon solar cells using exclusively industrially established processes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Polysilicon emitters for bipolar transistors: a review and Re-evaluation of theory and experiment10.1109/16.141239 ↗
2. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
3. Laser contact openings for local poly-Si-metal contacts enabling 26.1%- efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
4. Development of silicon heterojunction solar cell technology for manufacturing10.7567/JJAP.57.08RB15 ↗
5. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions10.1016/j.egypro.2016.07.057 ↗
6. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
7. High and low work function materials for passivated contacts10.1016/j.egypro.2015.07.037 ↗
8. Integrating transparent conductive oxides to improve the infrared response of silicon solar cells with passivating rear contacts10.1063/1.5049286 ↗
9. Hard x-ray photoelectron spectroscopy study of the buried Si/ZnO thin-film solar cell interface: direct evidence for the formation of Si–O at the expense of Zn-O bonds10.1063/1.3644084 ↗
10. Cerium oxide and hydrogen co-doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
11. In2O3-Based transparent conducting oxide films with high electron mobility fabricated at low process temperatures10.1002/pssa.201700506 ↗
12. The evolution of silicon wafer cleaning technology10.1149/1.2086825 ↗
13. Excellent surface passivation quality on crystalline silicon using industrial-scale direct-plasma TOPCon deposition technology10.1002/solr.201800068 ↗
14. Plasma hydrogen passivation for crystalline silicon thin-films
15. Quasi-steady-state photoconductance, a new method for solar cell material and device characterization
16. Chapman · 1980
17. Damage at hydrogenated amorphous/crystalline silicon interfaces by indium tin oxide overlayer sputtering10.1063/1.4764529 ↗
18. Degradation of hydrogenated amorphous silicon passivation films caused by sputtering deposition10.1002/pssa.201431923 ↗
19. Influence of the transparent electrode sputtering process on the interface passivation quality of silicon heterojunction solar cells
20. Optical constants of silicon in the region 1 to 10 ev10.1103/PhysRev.120.37 ↗
21. Silicon-hydrogen bonding and hydrogen diffusion in amorphous silicon10.1103/PhysRevB.51.10615 ↗
22. Energies of various configurations of hydrogen in silicon10.1103/PhysRevB.49.4579 ↗
23. Bond dissociation energy values in silicon-containing compounds and some of their implications10.1021/ar00068a004 ↗
24. Effect of ion bombardment on the a-Si: H based surface passivation of c-Si surfaces10.1063/1.3601485 ↗
25. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
26. Exact analytical solutions of the parameters of different generation real solar cells using Lambert W-function: a review article
27. High temperature annealing of ZnO: Al on passivating POLO junctions: impact on transparency, conductivity, junction passivation, and interface stability10.1109/JPHOTOV.2018.2878337 ↗