Highly passivating and blister-free hole selective poly-silicon based contact for large area crystalline silicon solar cells
Source abstract
Abstract
Abstract Passivating the contacts of crystalline silicon (c-Si) solar cells with a poly-crystalline silicon (poly-Si) layer on top of a thin silicon oxide (SiOx) is currently sparking interest for reducing recombination at the interface between the metal electrode and the c-Si substrate. Hole-selective poly-Si/SiOx structures could be particularly relevant to passivate the rear side of mass-produced p-type c-Si solar cells (i.e. PERC solar cells). In this study, we elaborate on the optimization of a hole-selective passivating structure consisting of a boron-doped poly-Si layer on top of a chemically grown thin SiOx. The poly-Si layer is prepared by Plasma Enhanced Chemical Vapor Deposition, which enables single-side deposition. However, if not optimized, this deposition technique leads to degradation of the poly-Si layer through a “blistering” phenomenon due to high hydrogen incorporation in the layer. To tackle this, a study of the interplay between process parameters and blistering is undertaken in order to obtain highly passivating and blister-free poly-Si/SiOx structures. By addition of a hydrogenation step, the implied open circuit voltage (iVoc) provided by the structure is further improved, leading to a maximum value of 734 mV demonstrated on symmetrical samples made from large area wafers. We also conduct a Conductive-Atomic Force Microscopy (C-AFM) study with the aim of investigating the pinholes formation in the SiOx interfacial layer that could explain the transport of free charge carriers within the poly-Si/SiOx structure. We show that the current levels detected by C-AFM are affected by an oxide layer that grows at the poly-Si top surface. We also demonstrate that conductive spots detected by C-AFM are not likely to mirror conductive pinholes within the SiOx layer but are rather linked to the poly-Si layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Industrial silicon solar cells applying the passivated emitter and rear cell (PERC) concept—a review10.1109/JPHOTOV.2016.2571627 ↗
2. The irresistible charm of a simple current flow pattern - 25% with a solar cell featuring a full-area back contact
3. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
4. High-efficiency silicon heterojunction solar cells: a review
5. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
6. The application of poly-Si/SiO x contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
7. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells10.1016/j.egypro.2017.09.250 ↗
8. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
9. On the recombination behavior of p + -type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces: on the recombination behavior of p + -type polysilicon on oxide junctions10.1002/pssa.201700058 ↗
10. Carrier selective tunnel oxide passivated contact enabling 21.4% efficient large-area n-type silicon solar cells
11. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
12. Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films10.1016/j.solmat.2017.06.039 ↗
13. Approaching 23% with large‐area monoPoly cells using screen‐printed and fired rear passivating contacts fabricated by inline PECVD
14. 23% efficient p-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
15. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
16. Low-cost plasma immersion ion implantation doping for Interdigitated back passivated contact (IBPC) solar cells10.1016/j.solmat.2016.05.044 ↗
17. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
18. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
19. Haase · 2018
20. Crystalline silicon solar cells with coannealed electron- and hole-selective SiC $_\text{x}$ passivating contacts
21. Metallisation of boron-doped polysilicon layers by screen printed silver pastes10.1002/pssr.201700334 ↗
22. Mewe · 2018 · 40014
23. Gallium-doped poly-Si:Ga/SiO2 passivated emitters to n-cz wafers with iV oc >730 mV10.1109/JPHOTOV.2017.2748422 ↗
24. Bias temperature instability in scaled p/sup+/polysilicon gate p-MOSFET’s10.1109/16.760398 ↗
25. Physical models of boron diffusion in ultrathin gate oxides10.1149/1.1837473 ↗
26. Properties of mixed phase silicon-oxide-based passivating contacts for silicon solar cells10.1016/j.solmat.2017.12.030 ↗
27. Charge carrier transport mechanisms of passivating contacts studied by temperature-dependent J-V measurements10.1016/j.solmat.2018.01.008 ↗
28. Temperature-dependent contact resistance of carrier selective Poly-Si on oxide junctions10.1016/j.solmat.2018.05.046 ↗
29. A study on the charge carrier transport of passivating contacts
30. SiO2 surface passivation layers – a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
31. Understanding the charge transport mechanisms through ultrathin SiO x layers in passivated contacts for high-efficiency silicon solar cells10.1063/1.5081832 ↗
32. Numerical simulation of carrier-selective electron contacts featuring tunnel oxides10.1109/JPHOTOV.2015.2455346 ↗
33. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
34. Study of pinhole conductivity at passivated carrier-selected contacts of silicon solar cells10.1016/j.egypro.2016.07.040 ↗
35. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
36. Optical functions of chemical vapor deposited thin‐film silicon determined by spectroscopic ellipsometry10.1063/1.109067 ↗
37. Measurement of the emitter saturation current by a contactless photoconductivity decay method (silicon solar cells)
38. Atomic scale understanding of poly-Si/SiO 2/c-Si passivated contacts: passivation degradation due to metallization
39. Nature of doped a-Si:H/c-Si interface recombination10.1063/1.3129578 ↗
40. Street · 1991
41. Optimisation of doped microcrystalline silicon films deposited at very low temperatures by hot-wire CVD10.1016/S0921-5107(99)00308-6 ↗
42. In situ photoluminescence study of plasma-induced damage at the a -Si:H/c-Si interface10.1063/1.4941298 ↗
43. The current understanding of charges in the thermally oxidized silicon structure10.1149/1.2402380 ↗
44. Contact selectivity and efficiency in crystalline silicon photovoltaics10.1109/JPHOTOV.2016.2598267 ↗
45. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
46. An investigation of the thermal stability of the interfacial oxide in polycrystalline silicon emitter bipolar transistors by comparing device results with high‐resolution electron microscopy observations10.1063/1.338861 ↗
47. Structural evolution of tunneling oxide passivating contact upon thermal annealing10.1038/s41598-017-13180-y ↗
48. A simple method for pinhole detection in carrier selective POLO-junctions for high efficiency silicon solar cells10.1016/j.solmat.2017.05.041 ↗
49. Electrical characterization of thin silicon films produced by metal-induced crystallization on insulating substrates by conductive AFM10.1384/jsa.17.260 ↗