journal article·2017-12Open access

Corrosion of Inconel 601 in molten salts for thermal energy storage

Madjid Sarvghad, Geoffrey Will, Theodore A. Steinberg

Abstract

Inconel 601 superalloy was examined for compatibility with the eutectic mixtures of NaCl + Na2SO4 and NaCl + Na2CO3 at 700 °C and Li2CO3 + K2CO3 + Na2CO3 at 450 °C in air for thermal energy storage. Electrochemical measurements combined with advanced microscopy and microanalysis techniques were employed. Oxidation was the primary attack leading to the development of oxide deposits on the alloy surface. The deposit was not stable in NaCl + Na2CO3 because of the fluxing action and high solubility of chromium in the salt leading to very high corrosion current density values. De-alloying threatened the material at 700 °C while the availability of oxygen controlled its rate. The availability of oxygen was seen to limit the corrosion rate in NaCl + Na2SO4 and NaCl + Na2CO3. De-alloying also appeared as pits on the metal surface at 700 °C. For the metal in contact with NaCl + Na2SO4 an additional layer attacked by sulfur was found under the pitting corroded layer. The attack morphology on the metal surface in contact with Li2CO3 + K2CO3 + Na2CO3 at 450 °C was found to be uniform.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Molten salt chemistry and electrochemical processes · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Numerical simulation of the simultaneous precipitation of δ and γ′ phases in the Ni-base superalloy ATI Allvac®718Plus™
2. Microstructure evolution during dynamic recrystallisation in polycrystalline nickel superalloys10.1016/j.msea.2015.03.121 ↗
3. Infrared brazing Inconel 601 and 422 stainless steel using the 70Au-22Ni-8Pd braze alloy10.1007/s10853-005-0446-9 ↗
4. Pitting characteristics of alloy 600 and alloy 601 in a chloride-containing acidic environment10.5006/1.3290372 ↗
5. 1 – Introduction to concentrating solar power (CSP) technology
6. Gomez · 2011
7. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
8. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
9. Lithium in thermal energy storage: a state-of-the-art review10.1016/j.rser.2014.10.096 ↗
10. 20 – high-temperature molten salts for solar power application
11. Stress assisted oxidative failure of Inconel 601 for thermal energy storage10.1016/j.solmat.2016.10.008 ↗
12. A comparative study of cyclic oxidation and sulfates-induced hot corrosion behavior of arc-sprayed Ni-Cr-Ti coatings at moderate temperatures10.1007/s11666-015-0222-6 ↗
13. The effect of structural evolution in INCONEL 601 on intergranular corrosion10.1016/S0254-0584(98)00149-7 ↗
14. Boundary carbides in cracking behavior of Ni base alloys10.5516/NET.07.2012.013 ↗
15. Stress corrosion cracking behavior at Inconel and low alloy steel weld interfaces10.1007/s11661-014-2560-2 ↗
16. Comparative interaction of cold-worked versus annealed Inconel 601 with molten carbonate salt at 450°C10.1016/j.corsci.2017.01.004 ↗
17. Ground-state properties and relative stability between the L12 and DO a phases of Ni3Al by Nb substitution10.1103/PhysRevB.53.1129 ↗
18. Oxidation induced intergranular cracking and Portevin–Le Chatelier effect in nickel base superalloy 71810.1016/S0921-5093(01)01224-2 ↗
19. Oxygen-induced intergranular cracking of a Ni-base alloy at elevated temperatures—an example of dynamic embrittlement10.1016/S1359-6454(01)00005-2 ↗
20. Surface enrichment and grain boundary segregation of niobium in Inconel 718 single- and poly-crystals10.1016/0956-716X(94)90294-1 ↗
21. Environmental enhancement of creep crack growth in Inconel 718 by oxygen and water vapor10.1016/0956-716X(94)90257-7 ↗
22. Lai · 1990
23. 12 – corrosion in molten salts
24. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
25. Chapter 5 oxidation of alloys I: single phase scales10.1016/S1875-9491(08)00005-7 ↗
26. Reference electrodes for ionic liquids and molten salts
27. Pseudo-reference electrodes
28. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride10.1038/35030069 ↗
29. Pinpoint and bulk electrochemical reduction of insulating silicon dioxide to silicon10.1038/nmat900 ↗
30. Corrosion of steel alloys in eutectic NaCl + Na2CO3 at 700°C and Li2CO3 + K2CO3 + Na2CO3 at 450°C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
31. Sabharwall · 2010
32. Kinetics and mechanism of the sulfidation of Fe-Mo alloys10.1007/BF00666462 ↗
33. Chapter 8 corrosion by sulfur10.1016/S1875-9491(08)00008-2 ↗
34. A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts10.1016/j.corsci.2014.03.012 ↗
35. Electrochemistry of Molten-Salt Corrosion10.1016/0921-5093(91)90265-O ↗
36. Corrosion in molten Na2CO3-K2CO3 at 800°C—I. Effect of oxygen partial pressure on iron corrosion10.1016/0010-938X(84)90114-8 ↗
37. Solubility of NiO in molten Li2CO3, Na2CO3, K2CO3, and Rb2CO3 at 910°C10.1149/1.2096093 ↗
38. Electrochemical studies of the corrosion of Ni and Fe in molten carbonate10.2320/jinstmet1952.48.7_720 ↗
39. Kruizenga · 2012
40. A surface analytical approach to the high temperature chlorination behaviour of Inconel 600 at 700°C10.1016/S0010-938X(96)00112-6 ↗
41. Electrochemical impedance models for molten salt corrosion10.1016/S0010-938X(00)00108-6 ↗
42. Hot corrosion behaviour and its mechanism of a new alumina-forming austenitic stainless steel in molten sodium sulphate10.1016/j.corsci.2013.08.003 ↗
43. Corrosion of nickel, iron, cobalt and their alloys in molten salt electrolytes10.1007/BF00356688 ↗
44. Molten-salt corrosion of silicon nitride: II, sodium sulfate10.1111/j.1151-2916.1988.tb05829.x ↗
45. E. Mohammadi Zahrani, Hot corrosion of wrought and weld overlay alloy 625 in molten salts environments, in, 2013.
46. Corrosion behavior of alloy 625 in PbSO4-Pb3O4-PbCl2-ZnO-10 Wt Pct CdO molten salt medium10.1007/s11661-011-0996-1 ↗
47. Molten salt induced corrosion of Inconel 625 superalloy in PbSO4–Pb3O4–PbCl2–Fe2O3–ZnO environment10.1016/j.corsci.2012.08.035 ↗
48. High temperature corrosion and electrochemical behavior of INCONEL 625 weld overlay in PbSO4–Pb3O4–PbCl2–CdO–ZnO molten salt medium10.1016/j.corsci.2014.03.034 ↗
49. A thermodynamic analysis and calculation of the Fe-Ni-Cr phase diagram10.1007/BF02646915 ↗
50. A reassessment of the Cr-Fe-Ni system10.1007/BF02672583 ↗
51. Application of dual-anneal diffusion multiples to the effective study of phase diagrams and phase transformations in the Fe–Cr–Ni system10.1016/j.actamat.2014.12.027 ↗
52. Cr-Fe-Ni (chromium-iron-nickel)10.1007/s11669-008-9449-y ↗