journal article·2017-11

Optimized multicrystalline silicon for solar cells enabling conversion efficiencies of 22%

Florian Schindler, Bernhard Michl, Patricia Krenckel, Stephan Riepe, Jan Benick, Ralph Müller, Armin Richter, Stefan W. Glunz, Martin C. Schubert

Publisher page

Abstract

Abstract Multicrystalline (mc) n-type silicon has proven to be a suitable substrate for the fabrication of highly efficient mc-Si solar cells. In this paper, we elaborate the impact of base material parameters on the efficiency potential of n-type mc-Si solar cells featuring a boron-diffused front side emitter and a full-area passivating rear contact (TOPCon). The electrical material quality can be significantly improved by replacing the standard crystallization process with a seed-assisted growth for crystallization of high-performance (HP) mc silicon. Using high-purity quartz crucibles or larger crucibles in combination with an optimization of the grain boundary area fraction with an adapted seed structure leads to further improvements of the material quality in terms of charge carrier lifetimes. However, not only the charge carrier lifetime, but also the base resistivity is of crucial importance for the efficiency potential depending on the cell concept. Based on experimental data and simulations, we assess the optimal range for the base resistivity and the wafer thickness for n-type mc-Si TOPCon solar cells. With the optimal material parameters, an “efficiency limiting bulk recombination analysis” (ELBA) reveals an efficiency potential in the range of 22.5% for n-type mc-Si TOPCon solar cells. Finally, we fabricated TOPCon solar cells based on optimized n-type HP mc-Si substrate and demonstrate a certified efficiency of 21.9%, which is the highest efficiency reported for multicrystalline silicon solar cells so far.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Development of high-performance multicrystalline silicon for photovoltaic industry10.1002/pip.2437 ↗
2. Trina Solar Press Release, Trina Solar Announces New Efficiency Record of 21.25% Efficiency for Multi-crystalline Silicon Solar Cell (accessed on 9 November 2015).
3. Solar cell efficiency tables (Version 47)10.1002/pip.2728 ↗
4. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
5. S.W. Glunz, F. Feldmann, A. Richter, M. Bivour, C. Reichel, H. Steinkemper, J. Benick, M. Hermle, The irresistible charm of a simple current flow pattern – 25% with a solar cell featuring a full-area back contact, in: Proceedings of the 31st EU PVSEC, Hamburg, Germany, 2015, pp. 259–263.
6. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
7. Structure and transformation of the metastable boron- and oxygen-related defect center in crystalline silicon10.1103/PhysRevB.69.024107 ↗
8. J. Schmidt, A.G. Aberle, R. Hezel, Investigation of carrier lifetime instabilities in Cz-grown silicon, in: Proceedings of the 26th IEEE Photovoltaic Specialists Conference Anaheim, Anaheim, USA, 1997, pp. 13–18.10.1109/PVSC.1997.653914 ↗
9. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
10. High-efficiency multicrystalline silicon solar cells: potential of n-Type doping10.1109/JPHOTOV.2015.2466474 ↗
11. High-Efficiency n-Type HP mc silicon solar cells10.1109/JPHOTOV.2017.2714139 ↗
12. Impact of impurities from crucible and coating on mc-silicon quality—the example of iron and cobalt10.1109/JPHOTOV.2013.2279116 ↗
13. Minority carrier lifetime imaging of silicon wafers calibrated by quasi-steady-state photoluminescence10.1016/j.solmat.2010.12.016 ↗
14. D.A. Clugston, P.A. Basore, PC1D version 5: 32-bit solar cell modeling on personal computers, in: Proceedings of the 26th IEEE Photovoltaic Specialists Conference Anaheim, Anaheim, USA, 1997, pp. 207–210.
15. PC1Dmod 6.1 – state-of-the-art models in a well-known interface for improved simulation of Si solar cells10.1016/j.solmat.2015.05.047 ↗
16. Efficiency limiting bulk recombination in multicrystalline silicon solar cells10.1016/j.solmat.2011.11.047 ↗
17. Solar cell efficiency losses due to impurities from the crucible in multicrystalline silicon10.1109/JPHOTOV.2013.2284060 ↗
18. Carrier recombination at metallic precipitates in p- and n-type silicon10.1109/JPHOTOV.2015.2438634 ↗
19. Comprehensive simulation study of industrially relevant silicon solar cell architectures for an optimal material parameter choice10.1002/pip.2790 ↗
20. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
21. Wafer thickness optimization for silicon solar cells of heterogeneous material quality10.1002/pssr.201308090 ↗
22. F. Feldmann, M. Bivour, C. Reichel, M. Hermle, S.W. Glunz, A passivated rear contact for high-efficiency n-type Si solar cells enabling high Voc's and FF > 82%, in: Proceedings of the 28th EU PVSEC, Paris, 2013, pp. 988–992.