journal article·2016-08

Influence of annealing temperature on structural, optical and electrical properties of AZO/Pd/AZO films

Weihai Zhang, Juan Xiong, Lei Liu, Xianghui Zhang, Haoshuang Gu

Publisher page

Abstract

Abstract A novel triple-layered transparent conductive film, AZO/Pd/AZO (APA), was deposited via magnetron sputtering on glass substrate at room temperature. The structural, morphological, electrical and optical properties of the APA films were systematically investigated with various Pd layer thicknesses and annealing temperatures in hydrogen atmosphere. The experiment results show that APA films are polycrystalline with a preferred (002) orientation. Comparing with that for the un-annealed films, the resistivity of APA film annealed in hydrogen atmosphere rapidly decreases from 1.84×10 −3 Ω cm to 4.8×10 −4 Ω cm, while the transmittance decreased slightly with increasing annealing temperature to 400 °C. Optical measurements indicated that the optical band gap ( E g ) of APA films varies from 3.37 eV to 3.69 eV with adjusting annealing temperature from 200 °C to 500 °C. The very low resistivity of 4.8×10 −4 Ω cm with a sheet resistance of 45 Ω/sq, a transmittance of 83.2% and a figure of merit value of 3.53×10 −3 Ω −1 were obtained by AZO (50 nm)/Pd (7 nm)/AZO (50 nm) structure after hydrogen annealing at 400 °C. These results support that the use of Pd insertion in transparent metal oxide electrode for its hydrogen sensitive property.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Advanced Memory and Neural Computing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors10.1038/nature03090 ↗
2. Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cells10.1038/nnano.2009.226 ↗
3. Fabrication of flexible conductive graphene/Ag/Al-doped zinc oxide multilayer films for application in flexible organic light-emitting diodes10.1016/j.orgel.2013.05.023 ↗
4. Improved performance of organic light-emitting diodes fabricated on Al-doped ZnO anodes incorporating a homogeneous Al-doped ZnO buffer layer grown by atomic layer deposition10.1021/am400140c ↗
5. High surface area transparent conducting oxide electrodes with a customizable device architecture10.1021/cm402551m ↗
6. Nano-sized indium-free MTO/Ag/MTO transparent conducting electrode prepared by RF sputtering at room temperature for organic photovoltaic cells10.1016/j.solmat.2014.08.025 ↗
7. Silver nanowire-conducting polymer-ITO hybrids for flexible and transparent conductive electrodes with excellent durability10.1021/acsami.5b03855 ↗
8. Fluorine doped zinc tin oxide multilayer transparent conducting oxides for organic photovoltaic׳s cells10.1016/j.solmat.2014.11.021 ↗
9. Efficient inverted polymer solar cells based on surface modified FTO transparent electrodes10.1016/j.solmat.2015.01.001 ↗
10. Improved chemical stability of ITO transparent anodes with a SnO2 buffer layer for organic solar cells10.1016/j.solmat.2015.08.039 ↗
11. Invisible Ag grid embedded with ITO nanoparticle layer as a transparent hybrid electrode10.1016/j.solmat.2014.03.003 ↗
12. Influence of annealing treatments on solution-processed ZnO film deposited on ITO substrates as electron transport layer for inverted polymer solar cells10.1016/j.solmat.2015.05.038 ↗
13. Structural and electrical properties of atomic layer deposited Al-doped ZnO films10.1002/adfm.201001342 ↗
14. Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures10.1002/adma.201003188 ↗
15. Metal nanowire networks: the next generation of transparent conductors
16. AZO/Au/AZO tri-layer thin films for the very low resistivity transparent electrode applications10.1016/j.mseb.2014.03.016 ↗
17. Structural and optoelectronic properties of AZO/Mo/AZO thin films prepared by rf-magnetron sputtering10.1016/j.matlet.2013.04.017 ↗
18. Characteristic of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
19. HAZO/AZO structure with improved full spectrum performance for high-efficiency thin-film solar cells10.1016/j.solmat.2014.12.025 ↗
20. Transparent conductive Mg and Ga co-doped ZnO thin films for solar cells grown by magnetron sputtering: H2 induced changes10.1016/j.solmat.2014.02.028 ↗
21. Al-doped ZnO for highly sensitive CO gas sensors10.1016/j.snb.2014.01.068 ↗
22. Fabrication of high performance carbon-supported ternary Pd–Cu–Fe electrocatalysts for formic acid electrooxidation via partly galvanic sacrifice of tunable binary Cu–Fe alloy templates10.1016/j.electacta.2016.02.130 ↗
23. Preparation and characterization of osmium films on quartz substrate by magnetron sputtering method10.1016/j.surfcoat.2015.10.010 ↗
24. Infrared reflective properties of AZO/Ag/AZO trilayers prepared by RF magnetron sputtering10.1016/j.ceramint.2014.04.139 ↗
25. Thickness study of AZO films by RF sputtering in Ar+H2 atmosphere at room temperature10.1002/pssa.201228014 ↗
26. New figure of merit for transparent conductors10.1063/1.323240 ↗
27. Temperature-resistant high-infrared transmittance indium molybdenum oxide thin films as an intermediate window layer for multi-junction photovoltaics10.1016/j.solmat.2014.04.029 ↗
28. Effect of heat treatment on infrared reflection property of Al-doped ZnO films10.1016/j.solmat.2014.04.030 ↗
29. Effects of film thickness and thermal treatment on the structural and opto-electronic properties of Ga-doped ZnO films deposited by sol–gel method10.1016/j.solmat.2015.02.016 ↗
30. Optical property and cycling durability of polytetrafluoroethylene top-covered and metal buffer layer inserted Mg–Ni switchable mirror10.1016/j.solmat.2009.05.002 ↗
31. Influence of hydrogen introduction on structure and properties of ZnO thin films during sputtering and post-annealing10.1016/j.tsf.2011.01.187 ↗
32. Effect of annealing temperature and atmosphere on aluminum-doped ZnO/Au/aluminum-doped ZnO thin film properties
33. Effects of annealing conditions and film thickness on electrical and optical properties of epitaxial Al-doped ZnO films10.1016/j.tsf.2015.12.050 ↗
34. Resistivity of atomic layer deposition grown ZnO: the influence of deposition temperature and post-annealing10.1016/j.tsf.2016.02.060 ↗
35. Enhanced gas sensing by individual SnO2 nanowires and nanobelts functionalized with Pd catalyst particles10.1021/nl050082v ↗
36. Effect of annealing temperature on properties of ZnO:Al thin films prepared by pulsed DC reactive magnetron sputtering10.1016/j.matlet.2014.10.106 ↗
37. Mechanism of conductivity degradation of AZO thin film in high humidity ambient10.1016/j.apsusc.2013.04.167 ↗
38. XPS study of the surface chemical state of a Pd/(SiO2+TiO2) catalyst after methane oxidation and SO2 treatment10.1016/j.jcat.2014.01.008 ↗
39. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
40. The interpretation of the properties of indium antimonide10.1088/0370-1301/67/10/306 ↗
41. Band-gap narrowing in heavily doped many-valley semiconductors10.1103/PhysRevB.24.1971 ↗
42. Band-gap shrinkage of semiconductors10.1103/PhysRevB.11.2251 ↗
43. Theory of the band structure of very degenerate semiconductors10.1103/PhysRev.126.405 ↗
44. Effect of thickness on structural, electrical, and optical properties of ZnO:Al films deposited by pulsed laser deposition10.1063/1.2437572 ↗
45. Flexible transparent conductive films on PET substrate with an AZO/AgNW/AZO sandwich structure10.1039/C3TC32554G ↗