Optimal geometric design of monolithic thin-film solar modules: Architecture of polymer solar cells
Source abstract
Abstract
Abstract In this study the geometrical optimization of monolithically integrated solar cells into serially connected solar modules is reported. Based on the experimental determination of electrodes′ sheet and intermittent contact resistances, the overall series resistance of individual solar cells and interconnected solar modules is calculated. Taking a constant photocurrent generation density into account, the total Joule respectively resistive power losses are determined by a self-consistent simulation according to the 1-diode model. This method allows optimization of the solar module geometry depending on the material system applied. As an example, polymer solar modules based on ITO-electrodes and ITO-free electrodes were optimized with respect to structuring dimensions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Transparent semiconducting oxides: Materials and devices10.1002/pssa.200983771 ↗
2. Area-scaling of organic solar cells10.1063/1.3211850 ↗
3. Influence of polymer solar cell geometry on series resistance and device efficiency10.1002/pssa.200925315 ↗
4. Solar cell efficiency tables (version 37)10.1002/pip.1088 ↗
5. Outlook Brightens for Plastic Solar Cells10.1126/science.332.6027.293 ↗
6. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
7. Area dependent efficiency of organic solar cells10.1063/1.2998540 ↗
8. Variations of cell performance in ITO-free organic solar cells with increasing cell areas10.1088/0268-1242/26/3/034010 ↗
9. Choice of electrode geometry for accurate measurement of organic photovoltaic cell performance10.1063/1.2895058 ↗
10. Transparent electrode requirements for thin film solar cell modules10.1039/C0EE00373E ↗
11. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
12. R. Rösch, B. Muhsin, M. Bärenklau, A. Schoonderbeek, G. Gobsch, L. Richter, R. Kling, D. Teckhaus and H. Hoppe, Towards Roll-To-Roll Processing of Flexible Polymer Solar Cell Modules, presented at: 24th EUPVSEC, Hamburg, Germany, p. 672-675
13. A. Schoonderbeek, M. Bärenklau, R. Rösch, D. Teckhaus, B. Muhsin, O. Haupt, H. Hoppe and U. Stute, Laser structuring for monolithic series connection of organic thin-film solar cells, presented at: 25th EUPVSEC, Valencia, Spain, p. 319-324
14. Potential of amorphous and microcrystalline silicon solar cells10.1016/j.tsf.2003.11.014 ↗
15. Technological aspects of flexible CIGS solar cells and modules10.1016/j.solener.2004.04.010 ↗
16. Comparative investigation of solar cell thin film processing using nanosecond and femtosecond lasers10.1088/0022-3727/39/3/005 ↗
17. Efficient polymer solar cell modules10.1016/j.synthmet.2009.10.015 ↗
18. T. Petsch, J. Haenel, M. Clair, B. Keiper and C. Scholz, Laser Processing of Organic Photovoltaic Cells with a Roll-To-Roll Manufacturing Process, Proceedings of the SPIE - The International Society for Optical Engineering p. 79210U (7 pp.) (2010)10.1117/12.876245 ↗
19. Inverse relation between photocurrent and absorption layer thickness in polymer solar cells10.1002/pssr.200600011 ↗
20. Multiparametric optimization of polymer solar cells: A route to reproducible high efficiency10.1016/j.solmat.2008.11.001 ↗
21. A method of measuring the resistivity and hall coefficient on lamellae of arbitrary shape
22. W. Shockley, Report no. Al-TOR-64-207, Air Force Atomic Laboratory, Wright-Patterson Air Force Base, Ohio, 1964.