journal article·2012-03

ITO-free inverted polymer solar cells with ZnO:Al cathodes and stable top anodes

Antonietta De Sio, Kambulakwao Chakanga, Oleg Sergeev, Karsten von Maydell, Jürgen Parisi, Elizabeth von Hauff

Publisher page

Abstract

We report on the application of ZnO:Al as the transparent conductive oxide in high performance inverted polymer solar cells. We show that the optimized inverted architecture, which does not contain low work function metals or water-based transport layers, can be employed without sacrificing device efficiency. The widely studied P3HT:PCBM donor–acceptor system was chosen for the active layer. ZnO:Al layers were produced by dc-magnetron sputtering on glass substrates and used as the cathode. The thickness of ZnO:Al was optimized to achieve a low sheet resistance while maintaining high transmission. The resulting ZnO:Al layers were smoother than the reference ITO samples, and the active layers could be processed directly onto ZnO:Al without employing additional buffer layers. The structure of the top anodic contact was also optimized. Initial devices with an Au layer demonstrated poor results, and device performance improved when a MoO3/Ag anode was used. Control devices in the standard forward structure using commercial ITO coated glass substrates were compared to the ZnO:Al based cells. Higher photocurrents were obtained in the inverted structures than in the ITO-based solar cells due to the higher transmittance of ZnO:Al in the spectral range where the blend absorbs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Analysis of the failure mechanism for a stable organic photovoltaic during 10 000h of testing10.1002/pip.794 ↗
2. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
3. Luminescence imaging of polymer solar cells: visualization of progressing degradation10.1063/1.3553864 ↗
4. Review of pulmonary toxicity of indium compounds to animals and humans10.1016/j.tsf.2009.10.123 ↗
5. Organic solar cells using inverted layer sequence10.1016/j.tsf.2005.06.006 ↗
6. Electrode grids for ITO free organic photovoltaic devices10.1002/adma.200602561 ↗
7. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
8. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
9. Longterm stability of efficient inverted P3HT:PCBM solarcells10.1016/j.solmat.2008.12.022 ↗
10. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
11. Li–Min Chen, Ziruo Hong, Gang Li, Yang Yang, Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells, Advanced Materials 21, (2009) 1434–1449.10.1002/adma.200802854 ↗
12. Improving the reproducibility of P3HT:PCBM solar cells by controlling the PCBM/cathode interface10.1021/jp9082163 ↗
13. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
14. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
15. Bulk heterojunction solar cells with NiO hole transporting layer based on AZO anode10.1016/j.solmat.2010.08.002 ↗
16. An Al-doped ZnO electrode grown by highly efficient cylindrical rotating magnetron sputtering for low cost organic photovoltaics10.1088/0022-3727/43/11/115101 ↗
17. Textured aluminium-doped zinc oxide thin films from atmospheric pressure chemical-vapor deposition10.1063/1.351309 ↗
18. Panchromatic conjugated polymers containing alternating donor/acceptor units for photovoltaic applications10.1021/ma062376o ↗
19. Inorganic solution-processed hole-injecting and electron-blocking layers in polymer light-emitting diodes10.1063/1.1522812 ↗
20. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
21. Effect of buffer layers on stability of polymer-based organic solar cells10.1143/JJAP.49.01AC02 ↗
22. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
23. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
24. Optimization of an inverted organic solar cell10.1016/j.solmat.2010.02.010 ↗