journal article·2014-11

In-situ synthesis and thermal shock resistance of cordierite/silicon carbide composites used for solar absorber coating

Xiaohong XU, Zhenggang RAO, Jianfeng WU, Yonghua LI, Yaxiang ZHANG, Xinbin LAO

Publisher page

Abstract

Abstract Cordierite/silicon carbide (SiC) composite ceramics with 10, 20 and 30 wt% cordierite were in-situ prepared via pressureless firing technique using silicon carbide, alumina, Kaolin and talc as starting materials. The results show that the synthesized composites all exhibited the good physical and mechanical properties. Among those, A2 composite with 20 wt% in-situ cordierite fired at 1280 °C exhibited the better bending strength and thermal shock resistance. The improvement of thermal shock resistance could be attributed to the proper cordierite wrapped around SiC, the homogeneous distribution of pores, the well-grown grains, as well as the formation of some glass phase. During the thermal shock test, a small amount of glass phases generated from the oxidation of SiC could react with Al 2 O 3 and MgO, and then more cordierite was formed due to the incorporation of nucleating agent TiO 2 . With in-situ cordierite content rising, both absorptance and emittance of composite reduced, but A2 composite had the better absorbing ability for the solar energy. It is believed that these in-situ cordierite/SiC composites should be a promising candidate to apply in the field of solar absorber coating owing to the better thermal shock resistance and absorptance of solar energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Thermal properties of materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. C.E. Kennedy, H. Price, Progress in development of high-temperature solar-selective coatings, in: Proceeding of ISEC 2005, International Solar Energy Conference, ISEC 2005-76039, Orlando, USA, 2005.10.1115/ISEC2005-76039 ↗
2. Mechanical and thermal behaviour of cordierite–zirconia composites10.1016/S0272-8842(01)00061-X ↗
3. Liquid phase sintering and microstructure-property relationships of silicon carbide ceramics with oxynitride additives10.1016/S0254-0584(00)00437-5 ↗
4. Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming10.1016/j.matlet.2012.03.046 ↗
5. Effect of nano-ZrO2 on microstructure and thermal shock behaviour of Al2O3/SiC composite ceramics used in solar thermal power10.1007/s11595-011-0214-4 ↗
6. Characterization of thermal shock damage in cordierite-mullite refractory materials by non-destructive methods
7. Preparation and characterization of SiC/cordierite composite porous ceramics10.1016/j.ceramint.2005.07.006 ↗
8. Behavior of silicon carbide/cordierite composite material after cyclic thermal shock10.1016/j.ceramint.2008.04.029 ↗
9. Determination of thermal shock resistance of silicon carbide/cordierite composite material using nondestructive test methods10.1016/j.jeurceramsoc.2007.09.038 ↗
10. Synthesize of cordierite–Si3N4 composite using nano silicon particles and investigation of microstructural
11. In-situ synthesis of a cordierite–andalusite composite for solar thermal storage10.1016/j.solmat.2012.08.010 ↗
12. Figures-of-merit for the thermal stress resistance of high-temperature brittle materials: a review10.1016/0390-5519(78)90028-5 ↗
13. Thermal shock resistance and fatigue of zircon–mullite composite materials10.1016/j.ceramint.2011.01.004 ↗
14. Thermal shock resistance of KZr2P3O12–SrZr4P6O24 ceramics10.1016/0955-2219(95)00058-3 ↗
15. In-situ preparation and thermal shock behavior of corundum-mullite-magnesium aluminate spinel composite ceramic
16. The thermal shock resistance of solids10.1016/S1359-6454(98)00127-X ↗
17. Preparation and thermal properties of SiC based solar heat absorbing ceramic
18. Preparation and characterization of alumina–silicon carbide–zirconia thermal storage cermics
19. The crystallisation of cordierite glass10.1007/BF00552045 ↗
20. The sintering characteristics of Bi2O3 added MgO–CaO–Al2O3–SiO2 glass powder10.1016/S0272-8842(97)00043-6 ↗
21. Enhanced surfaced crystallization of glass by adding traditional oxide nucleating agents10.1016/j.ceramint.2013.06.022 ↗
22. Electrical properties and thermal expansion of cordierite and cordierite-mullite materials10.1016/S0955-2219(01)00219-9 ↗
23. Seraphin · 1979