journal article·2013-10

Effect of the Ag deposition rate on the properties of conductive transparent MoO3/Ag/MoO3 multilayers

L. Cattin, Y. Lare, M. Makha, M. Fleury, F. Chandezon, T. Abachi, M. Morsli, K. Napo, M. Addou, J.C. Bernède

Publisher page

Abstract

Abstract The properties of molybdenum trioxide (20 nm)/silver (x nm)/molybdenum trioxide (35 nm) multilayer structures, deposited by simple vacuum evaporation, depend significantly on the deposition rate and on the thickness of the silver layer. If the presence of a commutation from an insulating state to a highly conductive state in these structures is usual, we show that, the thickness of the layer of Ag corresponding to the percolation of the metal paths, decreases from 8 nm to 4 nm when the Ag deposition rate increases from 0.2 nm/s to 0.4 nm/s. The transmission being optimum at 10–11 nm, the calculation of the factor of merit shows that the best structures are obtained for silver films approx. 10 nm thick deposited at a rate between 0.3 nm/s and 0.4 nm/s. When the optimal structures MoO3/Ag/MoO3 are used as anode in planar organic solar cells anode/CuI/CuPc/C60/Alq3/Al they allow achieving power conversion efficiency of the same order of magnitude than that achieved by reference cells using ITO as anode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Organic Electronics and Photovoltaics · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Highly flexible transparent electrodes for organic light-emitting diode-based displays10.1063/1.1806559 ↗
2. Polymer solar cells with poly(3,4-ethylenedioxythiophene) as transparent anode10.1016/j.orgel.2008.07.003 ↗
3. Multiwalled carbon nanotube sheets as transparent electrodes in high brightness organic light-emitting diodes10.1063/1.3006436 ↗
4. Organic solar cells using nanoimprinted transparent metal electrodes10.1002/adma.200800750 ↗
5. Metallic conductivity and the role of copper in ZnO/Cu/ZnO thin films for flexible electronics10.1063/1.3077184 ↗
6. Study of Ag nanoparticles incorporated SnO2 transparent conducting films by photochemical metal-organic deposition10.1016/j.tsf.2007.07.003 ↗
7. All solution processing ITO-free organic solar cell modules directly on barrier foil10.1016/j.solmat.2012.07.004 ↗
8. Round-robin studies as a method for testing and validating high-efficiency ITO-free polymer solar cells based on roll-to-roll-coated highly conductive and transparent flexible substrates10.1002/aenm.201200079 ↗
9. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
10. Transparent organic light emitting diodes using a multilayer oxide as a low resistance transparent cathode10.1063/1.2955528 ↗
11. Semitransparent inverted polymer solar cells using MoO3/Ag/WO3 as highly transparent anodes10.1016/j.solmat.2010.11.009 ↗
12. Influence of Ag thickness on electrical, optical and structural properties of nanocrystalline MoO3/Ag/ITO multilayer for optoelectronic applications10.1016/j.vacuum.2011.12.002 ↗
13. Highly flexible transparent and conductive ZnS/Ag/ZnS multilayer films prepared by ion beam assisted deposition10.1016/j.apsusc.2011.09.099 ↗
14. Design of transparent anodes for resonant cavity enhanced light harvesting in organic solar cells10.1002/adma.201104273 ↗
15. Cu-based multilayer transparent electrodes: a low cost alternative to ITO electrodes in organic solar cells10.1016/j.solmat.2012.01.016 ↗
16. Semitransparent inverted polymer solar cells using MoO3/Ag/V2O5 as transparent anodes10.1016/j.solmat.2011.09.004 ↗
17. Efect of the optical microcavity on the performance of ITO-free polymer solar cells with WO3/Ag/WO3 transparent electrode10.1016/j.solmat.2012.01.021 ↗
18. The efect of Ag layer thickness on properties of WO3/Ag/MoO3 multilayer film as anode in organic light emitting diodes10.1016/j.jlumin.2011.12.001 ↗
19. Investigation of low resistance transparent MoO3/Ag/MoO3 multilayer and application as anode in organic solar cells10.1016/j.tsf.2009.12.031 ↗
20. Effect of the thickness of the MoO3 layers on optical properties of MoO3/Ag/MoO3 multilayer structures10.1063/1.4751334 ↗
21. MoO3/Ag/MoO3 anode in organic photovoltaic cells: influence of the presence of a CuI buffer layer between the anode and the electron donor10.1063/1.4769808 ↗
22. WSXM: a software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
23. Ionization energy and energy gap structure of MoSI molecular wires: kelvin probe, ultraviolet photoelectron spectroscopy, and cyclic voltammetry measurements10.1021/la1050767 ↗
24. Standard reference surfaces for work function measurements in air10.1016/S0039-6028(01)01036-6 ↗
25. Efficient photon harvesting at high optical intensities in ultrathin organic double-heterostrucutre photovoltaic diodes10.1063/1.126433 ↗
26. MoO3 surface passivation of the transparent anode in organic solar cells using ultra-thin films10.1063/1.3077160 ↗
27. Bithiophene imide and benzodithiophene copolymers for efficient inverted polymer solar cells10.1002/adma.201103948 ↗
28. Bithiopheneimide-dithienosilole/dithienogermole copolymers for efficient solar cells: information from structure-property-device performance correlations and comparison to thieno[3,4-c] pyrrole-4,6 dione analogues10.1021/ja3081583 ↗
29. MoO3–Au composite interfacial layer for high efficiency and air-stable organic solar cells10.1016/j.orgel.2012.12.020 ↗
30. Organic solar cells with remarkable enhanced efficiency by using a CuI buffer to control the molecular orientation and modify the anode10.1063/1.3483159 ↗
31. Highly flexible, transparent, and low resistance indium zinc oxide–Ag–indium zinc oxide multilayer anode on polyethylene terephthalate substrate for flexible organic light light-emitting diodes10.1016/j.tsf.2008.06.025 ↗
32. New figure of merit for transparent conductors10.1063/1.323240 ↗
33. Study of optical and electrical properties of ZnO/Cu/ZnO multilayers deposited on flexible substrate10.1016/j.tsf.2012.10.064 ↗
34. Adhesion measurement of thin films, thick films and bulk coatings10.1155/APEC.3.21 ↗
35. Dielectric/Metal/Dielectric structures using copper as metal and MoO3 as dielectric for use as transparent electrode10.1016/j.tsf.2012.06.056 ↗
36. On the improvement of the anode/organic material interface in organic solar cells by the presence of an ultra-thin gold layer10.1002/pssa.200824343 ↗
37. Work function recovery of air exposed molybdenum oxide thin films10.1063/1.4748978 ↗
38. Enhanced photovoltaic response of organic solar cells using a crystalline molecular template10.1016/j.orgel.2011.10.016 ↗
39. Structural templating as a route to improved photovoltaic performance in copper phthalocyanine/fullerene (C60) heterojunctions10.1063/1.2821229 ↗
40. Influence of anode roughness and buffer layer nature on organic solar cells performance10.1016/j.tsf.2010.06.009 ↗
41. Au thin films deposited on SnO2:In and glass: Substrate effects on the optical and electrical properties10.1016/j.tsf.2010.09.048 ↗
42. Improved performance of organic solar cells by growth optimization of MoO3/CuI double-anode buffer10.1002/pssa.201228665 ↗
43. Molecular Orientation-dependent ionization potential of organic thin films10.1021/cm8016352 ↗