journal article·2006-01

Investigation of various surface passivation schemes for silicon solar cells

Ji Youn Lee, S.W. Glunz

Publisher page

Abstract

Abstract In this work, we have investigated three different surface passivation technologies: classical thermal oxidation (CTO), rapid thermal oxidation (RTO) and silicon nitride by plasma enhanced chemical vapor deposition (PECVD). Eight different passivation properties including SiO 2 /SiN x stacks on phosphorus diffused (100 and 40 Ω/Sq) and non-diffused 1 Ω cm FZ silicon were compared. Both types of SiO 2 layers, CTO and RTO, yield a higher effective lifetime on the emitter surface than on the non-diffused surface. For the SiN x layers the situation is reverted. On the other hand, with SiO 2 /SiN x stacks high lifetimes are obtained not only non-diffused surface but also on the diffused surface. Thus, we have chosen the RTO/SiN x stack layers as front and rear surface passivation in solar cells, which passivate relatively good on the surface and has very low-weighted reflection. On planar cells passivated with RTO/SiN x a very high V oc of 675.6 mV and a J sc of 35.1 mA/cm 2 was achieved. Compared to a planar cell using CTO the efficiency of RTO/SiN x cell is 0.8% higher (4.5% relative). It can be concluded that the RTO/SiN x layers are the optimal passivation for the front and rear surface. On the other hand, for textured cells, the J sc and FF of RTO/SiN x cells are lower than those of CTO cells. The main reasons of these J sc and FF losses were also discussed systematically.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. J. Knobloch, S.W. Glunz, D. Biro, W. Warta, E. Schäffer, W. Wettling, Solar cells with efficiencies above 21% processed from Czochralski grown silicon, Proceedings of the 25th IEEE PVSC, 1996, pp. 405–408.10.1109/PVSC.1996.564029 ↗
2. J. Zhao, A. Wang, P. Campbell, M.A. Green, 22.7% efficient PERL silicon solar cell module with a textured front surface, Proceedings of the 26th IEEE PVSC, 1997, pp. 1133–1136.10.1109/PVSC.1997.654288 ↗
3. Rapid thermal processing of high-efficiency silicon solar cells with controlled in situ annealing10.1109/16.704369 ↗
4. Highest-quality surface passivation of low-resistivity p-type silicon using stoichiometric PECVD silicon nitride10.1016/S0927-0248(00)00145-8 ↗
5. Impact of illumination level and oxide parameters on Shockley–Read–Hall recombination at the Si–SiO2 interface10.1063/1.350782 ↗
6. S. Schaefer, Plasmaätzen für die Photovoltaik: Plasmasysteme und-prozesse für die Herstellung von kristallinen Siliziumsolarzellen, Ph.D. Thesis, Konstanz, 2000.
7. J. Schumacher, Diploma Thesis, Universität Freiburg, 1994.
8. S. Dauwe, A. Metz, R. Hezel, A novel mask-free low-temperature rear surface passivation scheme based on PECVD silicon nitride for high-efficiency silicon solar cells, Proceedings of the 16th EC PVSEC, Glasgow, UK, 2000, pp. 1747–1750.
9. R.A. Sinton, A. Cuevas, M. Stuckings, Quasi-steady-state photoconductance, a new method for solar cell material and device characterization, Proceedings of the 25th IEEE PVSC, 1996, pp. 457–460.10.1109/PVSC.1996.564042 ↗
10. S.R. Wenham, S.J. Robinson, Rear surface effects in high efficiency silicon solar cells, Proceedings of the First WCPEC, 1994, pp. 1278–2482.10.1109/WCPEC.1994.519963 ↗
11. C.B. Honsberg, S.B. Ghozati, A.U. Ebong, Elimination of parasitic effects in floating junction rear surface passivation for solar cells, Proceedings of the 25th IEEE PVSC, 1996, pp. 401–404.10.1109/PVSC.1996.564028 ↗
12. S. Dauwe, L. Mittelstädt, A. Metz, R. Hezel, Loss mechanisms in silicon nitride rear surface passivation for silicon solar cells, Proceedings of the 17th EC PVSEC, 2001, pp. 339–342.