journal article·2015-01Open access

Wire-sawing processes: parametrical study and modeling

A. Bidiville, K. Wasmer, M. Van der Meer, C. Ballif

Abstract

Reducing the wafer breakage rate without changing the wafer thickness and sawing thinner wafers while maintaining constant breakage rate are two possibilities to decrease the costs of solar cells. They are similar in the sense that both require stronger wafers. To achieve this goal, it is important to gain insight into the wire-sawing process, its underlying defect creation mechanisms and the impact of sawing parameters on wafer strength. Consequently, a series of bricks were sawn with different slurry densities, wire tensions and feed rates, and the results were analyzed in terms of the wafer strength measured by bending tests. Roughness and wafer thickness were also measured. It is found that the strongest wafers were obtained by using a low abrasive volume fraction in the slurry, a low wire tension and a slow feed rate. From the analyses, we provide a qualitative interpretation of the effects of the processes at work in slurry-based wafering that explains, for instance, the wafer thickness and roughness variations. Based on physical arguments about the interaction between the wire, the silicon carbide particles and the silicon wafer, a semi-empirical model relating defect creation to the sawing parameters is developed. With this model, the wafer strength distribution can be predicted, thus simplifying optimization of the sawing process. (C) 2014 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Vibration and Dynamic Analysis · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Wafering of silicon crystals10.1002/pssa.200564508 ↗
2. The impact of silicon feedstock on the PV module cost10.1016/j.solmat.2009.10.011 ↗
3. Strength of silicon wafers: fracture mechanics approach10.1007/s10704-009-9324-9 ↗
4. Modeling the tensile strength and crack length of wire-sawn silicon wafers
5. T. Wagner, H.J. Möller, A 3D wire saw model of the slurry flow to predict forces exerted upon silicon ingots during cutting, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain (2008) pp. 1315–1320, DOI: 10.4229/23rdEUPVSEC2008-2CV.3.46.
6. C. Bierwisch, B. Weber, R. Kübler, M. Moseler, G. Kleer, Contact regimes in the wire sawing process: explicit 3D modeling of PEG/SiC slurry, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain (2008) pp. 1104–1108, DOI: 10.4229/23rdEUPVSEC2008-2BO.2.6.
7. Rietzschel R, Wagner T, Funke C, Möller HJ. Optimization of the wire sawing process using force- and temperature- measurements, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain (2008) pp. 1301–1304, DOI: 10.4229/23rdEUPVSEC2008-2CV.3.42.
8. B. Weber, C. Bierwisch, R. Kübler, G. Kleer, Investigation on the sawing of solar silicon by application of wires of 100μm diameter, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain (2008) pp. 1285–1288, DOI: 10.4229/23rdEUPVSEC2008-2CV.3.33.
9. Basic mechanisms and models of multi-wire sawing10.1002/adem.200400578 ↗
10. Bidiville · 2010
11. Mechanisms of wafer sawing and impact on wafer properties10.1002/pip.972 ↗
12. Effect of debris on the silicon wafering for solar cells10.1016/j.solmat.2011.04.038 ↗
13. Norm ISO 4287, Geometrical Product specifications (GPS) – surface texture: profile method – terms, definitions and surface texture parameters, International Organization for Standardization, 1997.
14. K. Wasmer, A. Bidiville, F. Janneret, J. Michler, C. Ballif, M. van der Meer, P.M. Nasch, Effects of edges defects due to multi-wire sawing on the wafer strength, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain (2008) pp. 1305–1310, DOI: 10.4229/23rdEUPVSEC2008-2CV.3.43.
15. K. Wasmer, A. Bidiville, J. Michler, C. Ballif, M. Van der Meer, P.M. Nasch, Effect of strength test methods on silicon wafer strength measurements, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007.
16. W. Weibull, A Statistical Theory Of The Strength Of Materials, Ingeniörsvetenskapsakademiens Handlingar Nr 151, 1939, Generalstabens Litografiska Anstalts Förlag, Stockholm. (this publication can be downloaded at: 〈http://www.barringer1.com/wa.htm〉)
17. 3-body abrasion of brittle materials as studied by lapping10.1016/0043-1648(93)90267-P ↗
18. Vibration analysis of wire and frequency response in the modern wiresaw manufacturing process10.1006/jsvi.1999.2471 ↗
19. Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness plate10.1016/0013-7944(79)90139-5 ↗
20. Slip control using particle-size analysis and specific surface area
21. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
22. The phenomena of rupture and flow in solids10.1098/rsta.1921.0006 ↗