Towards ink-jet printed fine line front side metallization of crystalline silicon solar cells
Source abstract
Abstract
Abstract An ink-jet method for fabrication of fine and smooth front side highly conductive silver lines on crystalline Silicon substrate is described. The fabricated conductive silver lines on different substrates are characterized by means optical microscope, optical profilometers, scanning electron microscope (SEM), and electrical measurements. The coffee-ring effect is controlled by increasing the solid loading of the ink from 20 W% to 40 W% and printing at optimum substrate temperature (90–100 °C) and optimum printing parameters. Smooth printed conductive silver lines, with line thickness ranges from 0.8∼0.9 μm for single pass, are obtained. When increased substrate temperature, a significant reduction of spreading of ink was observed. And conductive silver lines obtained at optimum substrate temperature (90–100 °C), free of periodic wrinkles and line bleeding, are produced. The influence of annealing temperature on line resistance, the morphology and functionality of the printed conductive silver lines is optically and electrically analyzed. To deposit thicker lines multiple passes of ink-jet printing were done on polished single crystalline silicon (sc-Si) and standard alkaline (NaOH) textured n + /p single crystalline silicon (n + /p sc-Si). Moreover, the printed conductive silver lines are characterized optically and electrically. And, promising results in terms of printed line thickness and electrical property are achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Simple integral screenprinting process for selective emitter polycrystalline silicon solar cells10.1063/1.106291 ↗
2. C.J. Curtis, M. van Hest, A. Miedaner, T. Kaydanova, L. Smith, d. s. ginley, multi-layer inkjet printed contacts for silicon solar cells, presented at the 2006 IEEE 4th world conference on photovoltaic energy conversion (wcpec-4), waikoloa, Hawaii, May 7-12, 2006.10.1109/WCPEC.2006.279711 ↗
3. High-efficiency (19%) screen-printed textured cells on low-resistivity float-zone silicon with high sheet-resistance emitters10.1002/pip.688 ↗
4. Development of screen-srinted silicon solar cells with high fill factors on 100 Ω /sq emitters10.1109/TED.2004.828280 ↗
5. Contacts to silicon using a silver paste containing a phosphorus source10.1109/PVSC.2010.5616902 ↗
6. High throughput via-metallization technique for multi-crystalline metal wrap through (MWT) silicon solar cells exceeding 16% efficiency10.1016/j.solmat.2009.06.020 ↗
7. fine line printed and plated contacts on high ohmic emitters enabling 20% cell efficiency10.1109/PVSC.2009.5411742 ↗
8. Analysis of series resistance of crystalline silicon solar cell with two-layer front metallization based on light-induced plating10.1016/j.solmat.2010.04.065 ↗
9. Jet printing flexible displays10.1016/S1369-7021(06)71445-6 ↗
10. U.S. Schubert, Inkjet printing of polymers: State of the art and future developments10.1002/adma.200300385 ↗
11. Inkjet printing-process and its applications
12. Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing10.1021/la053450j ↗
13. A low curing temperature silver ink for use in ink-jet printing and subsequent production of conductive tracks10.1002/marc.200400445 ↗
14. Marangoni effects in the spreading of liquid mixtures on a solid10.1021/la00076a013 ↗
15. Experimental study of the impact of an ink-jet printed droplet on a solid substrate10.1063/1.1773551 ↗
16. Capillary flow as the cause of ring strains from dried liquid drops10.1038/39827 ↗
17. Formation of crystalline ring patterns on extremelyhydrophobic supersmooth substrates: Extension of ring formation paradigms10.1021/cg0496989 ↗
18. writing of copper conductive patterns by ink-jet printing10.1016/j.tsf.2006.11.142 ↗
19. Inkjet-Printed line morphologies and temperature control of the coffee ring effect10.1021/la7026847 ↗
20. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
21. Using convective flow splitting for the direct printing of fine copper lines10.1063/1.1311954 ↗
22. Direct ink-jet printing and low temperature conversion of conductive silver patterns10.1007/s10853-006-6653-1 ↗
23. Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions10.1063/1.2424671 ↗
24. Inkjet Printing of Well-Defined Polymer Dots and Arrays10.1021/la049469o ↗
25. an ink-jet-deposited passive component process for RFID10.1109/TED.2004.838451 ↗
26. Ink-jet printing and microwave sintering of conductive silver tracks10.1002/adma.200502422 ↗
27. Time evolution of liquid drop impact onto solid, dry surfaces10.1007/s00348-002-0431-x ↗
28. Experimental study of the impact of an ink-jet printed droplet on a solid substrate10.1063/1.1773551 ↗
29. Drop impact on microwetting patterned surfaces10.1063/1.3460353 ↗
30. Inkjet-printed silver tracks: low temperature curing and thermal stability investigation10.1039/b720032c ↗
31. Fabrication and sintering effect on the morphologies and conductivity of nano-Ag particle films by the spin coating method10.1088/0957-4484/16/6/027 ↗
32. J. Martín, C. Montalbán, A. Apraiz, J.P. Aguerre, J.C. Jimeno, R. Gutiérrez, Y.T. Gizachew, L. Escoubas, J.J. Simon, M. Pasquinelli, J. Loiret, P.Y. Leguen, Silicon Solar Cells metallization by inkjet printing, 25th European Photovoltaic Solar Energy Conference and Exhibition, 6-10 September 2010, Valencia, Spain.
33. J. Martín, C. Montalbán, A. Apraiz, J.P. Aguerre, J.C. Jimeno, R. Gutiérrez, Y.T. Gizachew, L. Escoubas, J.J. Simon, M. Pasquinelli, J. Loiret, P.Y. Leguen, Silicon Solar Cells metallization by inkjet printing, 25th European Photovoltaic Solar Energy Conference and Exhibition, 6-10 September 2010, Valencia, Spain.
34. Low-cost industrial technologies of crystalline silicon solar cells10.1109/5.588971 ↗
35. S.W. Glunz, A. Grohe, M. Hermle, M. Hofmann, S. Janz, T. Roth, O. Schultz, M. Vetter, I. Martin, R. Ferré, S. Bermejo, W. Wolke, W. Warta, R. Preu, G. Willeke, Comparison of Different Dielectric Passivation Layers for Application in Industrially Feasible High-Efficiency Crystalline Silicon Solar Cells, Proceeding of 20th European Photovoltaic Solar Energy Conference, Spain, Barcelona, June 6-10 (2005).
36. J. Hoornstra, G. Schubert, K. Broek, F. Granek, C. Le Prince, Lead free metallisation paste for crystalline silicon solar cells: from model to results, in: Proceedings of the 31st IEEE Photovoltaic Specialists Conference, Orlando, FL, 2005, 1293–1296.10.1109/PVSC.2005.1488377 ↗
37. Physical understanding of printed thick- film front contacts of crystalline Si solar cells—review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
38. Effect of the Thermal Properties of Frits on the Electrical Properties of Screen-Printed Silicon Solar Cells10.3938/jkps.55.1046 ↗
39. Understanding and Use of IR Belt Furnace for Rapid Thermal Firing of Screen-Printed Contacts to Si Solar Cells10.1109/LED.2010.2044363 ↗
40. Contact Formation on n-Type Silicon: Basic Reactions and Contact Model for Seed-Layer Contacts10.1002/adfm.200901305 ↗
41. M. Bähr, S. Kim, S. Sridharan, C. Khadilkar, A. Shaikh, I. Köhler, M. Reichardt, M. Kumar, A new approach for front side metallisation of industrial type silicon solar cells using a structurization by etching, presented at Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, 1015–1019.
42. Beneficial and constraining effects of laser scribing in buried contact solar cells10.1002/(SICI)1099-159X(199703/04)5:2<131::AID-PIP162>3.0.CO;2-N ↗
43. Forming openings to semiconductor layers of silicon solar cells by inkjet printing10.1016/j.solmat.2008.05.018 ↗
44. J. Specht, D. Biro, N. Mingirulli, M. Aleman, U. Belledin, R. Efinger, D. Erath, L. Gautero, A. Lemke, D. Stüwe, J. Rentsch, R. Preu, Using hotmelt-inkjet as a structuring method for higher efficiency industrial silicon solar cells, presented at Proceedings of the Digital Fabrication Conference, Pittsburgh, USA, 6–11 September 2008, 912–917.10.2352/ISSN.2169-4451.2008.24.1.art00116_2 ↗