“Green” polymer solar cell based on water-soluble poly [3-(potassium-6-hexanoate) thiophene-2, 5-diyl] and aqueous-dispersible noncovalent functionalized graphene sheets
Source abstract
Abstract
Aqueous-dispersible graphene (a-dG) sheets were fabricated by reducing the graphite oxide (GO) nanosheets in water in the presence of poly [3-(potassium-6-hexanoate) thiophene-2, 5-diyl] (P3KT) through noncovalent functionalization. The successful reduction of GO was confirmed by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The obvious fluorescence quenching of P3KT by a-dG in the solid films due to the efficient charge transfer between P3KT and a-dG demonstrated that a-dG could be expected to be used as the electron acceptor in the polymer solar cell (PSC) devices. “Green” PSCs with the structure of ITO/PEDOT: PSS/P3KT: a-dG/ZnO/Al, where P3KT acts as donor, aqueous-dispersible noncovalent functionalized graphene sheets as acceptor and ZnO as both electron transporting and hole blocking layer, have been fabricated using water as the solvent for the active layer. The short-circuit current (Jsc), open circuit voltage (Voc) and power conversion efficiency (PCE) of the devices with P3KT: a-dG composite film as the active layer increased compared with those of the devices with P3KT pure film as the active layer, which indicated that a-dG can be used as the electron acceptor in PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Nanostructured organic and hybrid solar cells10.1002/adma.201003991 ↗
2. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
3. Manufacture, integration and demonstration of polymer solar cells in a lamp for the ‘‘Lighting Africa’’ initiative10.1039/b918441d ↗
4. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
5. Low band gap polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
6. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗
7. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
8. Polyphenylene-based materials for organic photovoltaics10.1021/cr100052z ↗
9. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
10. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
11. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
12. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
13. A thieno[3.4-c]pyrrole-4.6-dione-based copolymer for efficient solar cells10.1021/ja101888b ↗
14. Development of a new s-tetrazine-based copolymer for efficient solar cells10.1021/ja106052e ↗
15. Effect of carbon chain length in the substituent of PCBM-like molecules on their photovoltaic properties10.1002/adfm.200902447 ↗
16. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene–C60 bisadduct by device optimization10.1002/adma.201001339 ↗
17. Development of new conjugated polymers with donor–π-bridge–acceptor side chains for high performance solar cells10.1021/ja9066139 ↗
18. Interfacial modification to improve inverted polymer solar cells10.1039/b808004f ↗
19. Fabrication of polymer solar cells using aqueous processing for all layers including the metal back electrode10.1002/aenm.201000007 ↗
20. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
21. Effect of annealing on the characteristics of organic solar cells: polymer blends with a 2-vinyl-4, 5-dicyanoimidazole derivative10.1021/ma0706273 ↗
22. Synthesis of high-quality graphene with a pre-determined number of layers10.1016/j.carbon.2008.10.031 ↗
23. Anchoring hydrous RuO2 on graphene sheets for high-performance electrochemical capacitors10.1002/adfm.201001054 ↗
24. Optically transparent cathode for dye-sensitized solar cells based on graphene nanoplatelets10.1021/nn102353h ↗
25. Controllable synthesis of graphene and its applications10.1002/adma.200904144 ↗
26. Soluble P3HT-grafted graphene for efficient bilayer heterojunction photovoltaic devices10.1021/nn101671t ↗
27. Organic photovoltaic devices based on a novel acceptor material: graphene10.1002/adma.200800366 ↗
28. Organic photovoltaic cells based on an acceptor of soluble graphene10.1063/1.2938865 ↗
29. Polymer photovoltaic cells based on solution-processable graphene and P3HT10.1002/adfm.200800954 ↗
30. Solution-processable functionalized graphene in donor/acceptor-type organic photovoltaic cells10.1016/j.solmat.2010.03.004 ↗
31. Improving photovoltaic properties by incorporating both SPF graphene and functionalized multiwalled carbon nanotubes10.1016/j.solmat.2010.07.001 ↗
32. Fluorescence and electroluminescence quenching evidence of interfacial charge transfer in poly (3-hexylthiophene): graphene oxide bulk heterojunction photovoltaic devices10.1021/nn1022457 ↗
33. Non-covalent functionalization of graphene sheets by sulfonated polyaniline10.1039/b821805f ↗
34. Solution properties of graphite and graphene10.1021/ja060680r ↗
35. Flexible graphene films via the filtration of water-soluble noncovalent functionalized graphene sheets10.1021/ja800745y ↗
36. Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate)10.1039/B512799H ↗
37. Stable, conductive supramolecular composite of graphene sheets with conjugated polyelectrolyte10.1021/la100365z ↗
38. Composites of graphene with large aromatic molecules10.1002/adma.200803808 ↗
39. Preparation of graphene oxide10.1021/ja01539a017 ↗
40. Donor–acceptor molecule as the acceptor for polymer-based bulk heterojunction solar cells10.1021/jp811522p ↗
41. Designing acceptor polymers for organic photovoltaic devices10.1021/jp110990w ↗
42. All-spin-coating vacuum-free processed semi-transparent inverted polymer solar cells with PEDOT: PSS anode and PAH-D interfacial layer10.1016/j.orgel.2010.04.012 ↗
43. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
44. Efficient bulk heterojunction solar cells with poly[2,7-(9.9-dihexylfluorene)-alt-bithiophene] and 6,6-phenyl c61 butyric acid methyl ester blends and their application in tandem cells10.1021/am900823b ↗
45. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
46. Polymer solar cells that use self-assembled-monolayer-modified ZnO/metals as cathodes10.1002/adma.200703050 ↗