journal article·2008-10

Electro deposited In2S3 buffer layers for CuInS2 solar cells

T. Todorov, J. Carda, P. Escribano, A. Grimm, J. Klaer, R. Klenk

Publisher page

Abstract

Abstract We report the electro deposition of In 2 S 3 buffer layers for CuInS 2 solar cells. All materials and deposition conditions were selected taking into account environmental, economic and technological aspects of a potential transfer to large volume industrial production. Different bath compositions and electro deposition parameters were studied. The obtained films exhibited complete substrate coverage, confirmed by SEM and XPS. In/S ratio close to 2/3 was obtained. XPS measurements detected the presence of indium hydroxide, transforming into oxide upon anneal at 200 °C. Maximum photoelectric conversion efficiency of 7.1% was obtained, limited mainly by a low fill factor (51%). Further process optimization is expected to lead to efficiencies comparable to CdS buffers. So far, open-circuit voltages as high as 660 mV were demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. In-line deposited Cu(In,Ga)Se2 solar cells: influence of deposition temperature and Na co-evaporation on carrier collection10.1016/j.tsf.2003.10.107 ↗
2. Second generation CIS solar modules10.1016/j.solener.2004.05.011 ↗
3. Solar cells based on CuInS2—an overview10.1016/j.tsf.2004.11.042 ↗
4. Characterisation and modelling of chalcopyrite solar cells10.1016/S0040-6090(00)01736-3 ↗
5. Spray-ILGAR indium sulfide buffers for Cu(In, Ga)(S, Se)2 solar cells10.1002/pip.655 ↗
6. Buffer layers in Cu(In,Ga)Se2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
7. Ch. Kaufmann, Chemical bath deposition of thin semiconductor films for use as buffer layers in CuInS2 thin film solar cells, Ph.D. Thesis, Queen's College Oxford, Hilary, 2002.
8. High-efficiency cadmium-free Cu(In,Ga)Se2 thin-filmsolar cells with chemically deposited ZnS buffer layers10.1109/16.792002 ↗
9. The electronic structure of the [Zn (S, O)/ZnS]/CuInS2 heterointerface—impact of post-annealing10.1016/j.cplett.2006.11.022 ↗
10. Admittance spectroscopy of cadmium free CIGS solar cells heterointerfaces10.1016/j.tsf.2005.11.087 ↗
11. Alternative buffers for chalcopyrite solar cells10.1016/j.solener.2004.06.018 ↗
12. US patents: electrolytic apparatus and process, 4687554, Dip type surface treatment apparatus and dip type surface treatment method 6610187, Apparatus for continuously producing a base for a printed circuit board 4883575.
13. Size-quantized CdS films in thin film CuInS2 solar cells10.1063/1.122697 ↗
14. Preparation of CuInS2 thin films by electrodeposition and sulphurisation for applications in solar cells10.1016/j.solmat.2003.09.002 ↗
15. Quartz crystal microbalance study of the growth of indium(III) sulphide films from a chemical solution10.1016/j.tsf.2004.11.023 ↗
16. Preparation of CuInS2 films with sufficient sulfur content and excellent morphology by one-step electrodeposition10.1016/S0927-0248(97)00122-0 ↗
17. Importance of the density gradient effects in modelling electro deposition process at a rotating cylinder electrode10.1016/j.electacta.2005.11.029 ↗
18. J. Klaer, R. Klenk, D. Abou-Ras, R. Scheer, H.W. Schock, Progress in mini-modules from a CuInS2 baseline process, in: Proceedings of the 21st European PVSEC, Dresden, 4–8 September 2006, p. 1801.
19. I. Lauermann, P. Pistor, I. Kötschau, M. Bär: Synchrotron-Based Spectroscopy for the Characterisation of Surfaces and Interfaces in Chalcopyrite Solar Cells, in Thin-Film Compound Semiconductor Photovoltaics, edited by W. Shafarman, T. Gessert, S. Niki, S. Siebentritt (Mater. Res. Soc. Symp. Proc. 865, Warrendale, PA, 2005), F2.1.10.1557/PROC-865-F2.1 ↗
20. Inducing and monitoring photoelectrochemical reactions at surfaces and buried interfaces in Cu(In,Ga)(S,Se)2 thin-film solar cells10.1063/1.1906309 ↗
21. Zn(O,OH) layers in chalcopyrite thin-film solar cells: valence-band10.1063/1.2034650 ↗
22. Structural and optical studies on thermal-annealed In2S3 films prepared by the chemical bath deposition technique10.1016/j.tsf.2004.05.096 ↗
23. Structural, optical and electrical properties of β-In2S3−3xO3x thin films obtained by PVD10.1016/S0040-6090(01)01512-7 ↗