Evaluation and manipulation of the key emulsification factors toward highly stable PCM-water nano-emulsions for thermal energy storage
Source abstract
Abstract
Abstract PCM emulsions represent a common type of fluid media for thermal energy storage (TES) systems. However, a major challenge for their application is to maintain a stable homogeneous fluid. Reduction of the droplet size is one of the most effective approaches for improving stability, such as the preparation of nano-emulsions. This work aims to develop stable PCM-water nano-emulsions prepared with n-hexadecane by manipulating the key emulsification factors, particularly the emulsifier combinations and process conditions. Two low-energy emulsification methods, phase inversion temperature (PIT) and emulsion inversion point (EIP), were applied to prepare the nano-emulsions, using Brij L4 as the emulsifier. Several important properties of the emulsions were evaluated including droplet size distribution, conductivity, and rheological characteristics and the stability of emulsions over extended periods and multiple freeze-thaw cycles. Moreover, the thermal performance for their potential application in TES systems were examined. Eventually, nano-emulsions with small and uniform droplets were obtained by both PIT and EIP methods with suitable emulsifier concentrations. The smallest droplet size (~60 nm) was attained with 11% emulsifier and 30% PCM by the PIT method, and the most stable emulsion attained with 15% of emulsifier and 30% of PCM. The PCM nano-emulsions behaved as a Newtonian liquid with a good fluidity and a superior stability over long-time storage and freezing-cycles. The degree of supercooling was reduced with the addtion of nano SiO2 as a nucleating agent. The findings from the study are useful for better understanding of the controlling factors and further development of stable and effective nano-emulsions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Thermal energy storage: recent developments and practical aspects10.1016/j.pecs.2015.10.003 ↗
2. Energy storage: applications and challenges10.1016/j.solmat.2013.08.015 ↗
3. Advancement in phase change materials for thermal energy storage applications10.1016/j.solmat.2017.07.023 ↗
4. Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material10.1016/j.applthermaleng.2006.11.004 ↗
5. A comprehensive review on phase change material emulsions: fabrication, characteristics, and heat transfer performance10.1016/j.solmat.2018.11.016 ↗
6. Preparation of phase change material emulsions with good stability and little supercooling by using a mixed polymeric emulsifier for thermal energy storage10.1016/j.solmat.2017.10.025 ↗
7. Development and characterization of novel and stable silicon nanoparticles-embedded PCM-in-water emulsions for thermal energy storage10.1016/j.apenergy.2019.01.159 ↗
8. Nanoemulsions: formation, properties and applications10.1039/C5SM02958A ↗
9. Low-energy formation of edible nanoemulsions: factors influencing droplet size produced by emulsion phase inversion10.1016/j.jcis.2012.07.089 ↗
10. The influence of coemulsifier type on the stability of oil-in-water emulsions10.1016/0927-7757(95)03132-W ↗
11. A study of the relation between bicontinuous microemulsions and oil/water nano-emulsion formation10.1021/la0300737 ↗
12. Nano-emulsion formation by emulsion phase inversion10.1016/j.colsurfa.2004.09.029 ↗
13. Binks · 1998
14. Principles of emulsion formulation engineering
15. Formation and stability of paraffin oil-in-water nano-emulsions prepared by the emulsion inversion point method10.1016/j.jcis.2006.07.055 ↗
16. Influence of CTAB and SDS on the properties of oil-in-water nano-emulsion with paraffin and span 20/Tween 2010.1016/j.colsurfa.2012.10.065 ↗
17. Formation of tetradecane nanoemulsion by low-energy emulsification methods10.1016/j.ijrefrig.2010.09.002 ↗
18. Comparison of paraffin nanoemulsions prepared by low-energy emulsification method for latent heat storage10.1016/j.ijthermalsci.2012.12.007 ↗
19. PCM in water emulsions: supercooling reduction effects of nano-additives, viscosity effects of surfactants and stability10.1002/adem.201300575 ↗
20. Ultrasound assisted manufacturing of paraffin wax nanoemulsions: process optimization10.1016/j.ultsonch.2014.10.024 ↗
21. Thermophysical properties and thermal characteristics of phase change emulsion for thermal energy storage media10.1016/j.energy.2016.04.021 ↗
22. Preparation and characterization of nano-sized phase change emulsions as thermal energy storage and transport media10.1016/j.apenergy.2017.01.012 ↗
23. Synthesis and characterization of a narrow size distribution nano phase change material emulsion for thermal energy storage10.1016/j.solener.2017.03.056 ↗
24. Cabaleiro · 2019 · 113868
25. Review on phase change materials (PCMs) for cold thermal energy storage applications10.1016/j.apenergy.2012.03.058 ↗
26. Subcooling in PCM emulsions-Part 1: experimental10.1016/j.tca.2010.06.006 ↗
27. Subcooling in hexadecane emulsions10.1016/j.ijrefrig.2010.07.022 ↗
28. PCM-in-water emulsion for solar thermal applications: the effects of emulsifiers and emulsification conditions on thermal performance, stability and rheology characteristics10.1016/j.solmat.2015.12.022 ↗
29. Graphene oxide Pickering phase change material emulsions with high thermal conductivity and photo-thermal performance for thermal energy management10.1016/j.colsurfa.2019.05.007 ↗
30. Supercooling suppression and thermal behavior improvement of erythritol as phase change material for thermal energy storage10.1016/j.solmat.2017.06.027 ↗
31. Höhne · 2003
32. Crystallization in emulsions10.1016/S1359-0294(02)00080-8 ↗
33. Formation and stability of nano-emulsions10.1016/j.cis.2003.10.023 ↗
34. Rosen · 2012
35. Phase inversion emulsification: current understanding and applications10.1016/j.cis.2015.01.001 ↗
36. Molecular weight distribution of nonionic surfactants. I. Surface and interfacial tension of normal distribution and homogeneous p, t-octylphenoxyethoxyethanols (OPE'S)10.1021/j100804a010 ↗
37. Structure of adhesive emulsions10.1021/la00036a006 ↗
38. Subcooling in PCM emulsions – Part 2: interpretation in terms of nucleation theory10.1016/j.tca.2011.04.027 ↗
39. Tadros · 2004 · vols. 108–109 · 227
40. Formation and stability of nano-emulsions10.1016/j.cis.2003.10.023 ↗
41. Nano-emulsions and micro-emulsions: clarifications of the critical differences10.1007/s11095-010-0309-1 ↗
42. McClements · 2015
43. Colloidal behavior of nanoemulsions: interactions, structure, and rheology10.1016/j.cocis.2016.06.006 ↗
44. Nano-emulsions: formation, properties, and applications
45. Ostwald ripening in emulsions: estimation of solution thermodynamics of the disperse phase10.1016/S0001-8686(03)00113-1 ↗
46. Perrin · 2013
47. The physics of the colloidal glass transition10.1088/0034-4885/75/6/066501 ↗