journal article·2019-10Open access

Frost and High-temperature resistance performance of a novel dual-phase change material flat plate solar collector

Dengjia Wang, Hui Liu, Yanfeng Liu, Tao Xu, Yingying Wang, Hu Du, Xiaowen Wang, Jiaping Liu

Abstract

In order to overcome the freezing and overheating problems of solar collectors, a novel dual-phase change material (PCM) flat plate collector was proposed in this research. There were two layers of PCMs in the solar collector, one layer material with a phase change temperature of 70 °C and another with a phase change temperature of 15 °C, respectively. They were placed in the space under the absorber plate in the dual-PCM collector. Frost and High-temperature resistance performance of the novel dual-phase change material solar collector was tested systematically in a laboratory. The experimental results showed that the time taken for the temperature of the absorber plate to increase from 60 °C to 78 °C could be prolonged by 1.6 h under high temperature conditions. Furthermore, the low-melting point PCM can substantially slow the temperature decrease of the collector by solidifying and releasing heat under the low-temperature conditions. And the time taken for the temperature of the absorber plate to decrease from 19 °C to 10 °C could be prolonged by 6.4 h and 3.1 h when low-melting PCM placed below high-melting PCM and the high-melting PCM placed below low-melting PCM. Thus it can be seen that the dual-PCM collector can be used to overcome the phenomenon of overheating and freezing. In addition, compared with an ordinary flat plate collector, the efficiency of the dual-PCM collector was increased by 24.1% and 19.6% when placing low-melting PCM below high-melting PCM and in the opposite condition respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Heat Transfer Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Comparison of support vector machine and copula-based nonlinear quantile regression for estimating the daily diffuse solar radiation: a case study in China10.1016/j.renene.2019.07.053 ↗
2. Experimental study on heating characteristics and parameter optimization of transpired solar collectors10.1016/j.apenergy.2019.01.004 ↗
3. A review of strategies for the control of high temperature stagnation in solar collectors and systems10.1016/j.egypro.2012.11.090 ↗
4. Freeze protection for flat-plate collectors using heating10.1016/0038-092X(77)90038-X ↗
5. Performance evaluation of a liquid desiccant solar air conditioning system10.1016/j.egypro.2012.11.064 ↗
6. Development of flat plate collector with plastic transparent insulation and low-cost overheating protection system10.1016/j.apenergy.2014.07.093 ↗
7. Experimental and numerical investigations of passive air cooling of a residential flat-plate solar collector under stagnation conditions10.1016/j.solener.2015.10.029 ↗
8. Evaluation of thermal characteristics of a flat plate Solar Collector with a back mounted air channel10.1016/j.applthermaleng.2017.05.121 ↗
9. Selection of thermotropic materials for overheat protection of polymer absorbers10.1016/j.solener.2013.10.026 ↗
10. Thermotropic layers for flat-plate collectors—a review of various concepts for overheating protection with polymeric materials10.1016/j.solmat.2008.09.004 ↗
11. Property and performance requirements for thermotropic layers to prevent overheating in an all polymeric flat-plate collector10.1016/j.solmat.2007.12.005 ↗
12. Koenigshofer · 1977
13. The antifreeze mechanism of flat plate-type solar collector and material characteristics of absorber plate//the New Solar Energy Technology in the 21st Century
14. Theoretical and experimental studies on sequential freezing solar water heater10.1016/0038-092X(94)90474-X ↗
15. An experimental study on double-glazed flat plate solar water heating system in Turkey10.4028/www.scientific.net/AMM.564.204 ↗
16. Comparative study of transparent insulation materials cover systems for integrated-collector-storage solar water heaters10.1016/S0927-0248(99)00018-5 ↗
17. Experimental and numerical study of the freezing process of flat-plate solar collector10.1016/j.applthermaleng.2017.02.111 ↗
18. Flat-plate solar collector/storage system
19. Experimental investigation of thermal performance of flat and v-corrugated plate solar air heaters with and without PCM as thermal energy storage10.1016/j.enconman.2016.01.068 ↗
20. Heat transfer performance analysis of a solar flat-plate collector with an integrated metal foam porous structure filled with paraffin10.1016/j.applthermaleng.2010.04.031 ↗
21. The design and research of anti-freezing solar flat plate collector with phase change energy storage layer
22. A storage domestic solar hot water system with a back layer of phase change material10.1016/j.expthermflusci.2012.05.017 ↗
23. Experimental study of a compact PCM solar collector10.1016/j.energy.2005.11.019 ↗
24. Thermal conductivity enhancement in a latent heat storage system10.1016/j.solener.2006.11.009 ↗
25. Forecasting of thermal energy storage performance of Phase Change Material in a solar collector using soft computing techniques10.1016/j.eswa.2009.08.007 ↗
26. General Administration of Quality Supervision · 2007
27. Study on the PCM flat-plate solar collector system with antifreeze characteristics10.1016/j.ijheatmasstransfer.2018.09.114 ↗
28. Solar air collector with the solar absorber plate containing a PCM – environmental chamber experiments and computer simulations10.1016/j.renene.2019.05.049 ↗