Improving Wall Slip Behavior of Silver Pastes on Screen Emulsions for Fine Line Screen Printing
Source abstract
Abstract
Abstract The ongoing demand for a further reduction of electrode width for solar cell metallization by flatbed and rotary screen printing is one of the main challenges in recent years. The main focus was on the improvement of silver paste printability which is strongly influenced by its rheological behavior. Furthermore, the impact of slip behavior in contact with smooth surfaces e.g. mesh wires and emulsion plays an important role when printing of small electrode width is desired. Therefore, four types of coatings for screen emulsions are investigated in terms of their wall slip behavior with commercial available silver pastes. For this reason, a novel parameter slip efficiency β is introduced which enables the prediction of potential improvements in fine line screen printing by slip effects at the paste-emulsion interface. Furthermore, contact angles on coated surfaces with respective paste solvents are measured and an exponential correlation between both is discovered. Finally, metallization results of a PERC solar cell batch for the two best coating candidates are presented and a correlation between printed electrode width and slip efficiency during screen printing is given. For the best coating, an average finger resistance of 99 Ω/m at an average finger width of 26.2 μm was demonstrated which shows a significant improvement compared to the reference with a finger resistance of 164 Ω/m for 27.7 μm finger width.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Nanomaterials and Printing Technologies · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
2. Paste rheology correlating with dispensed finger geometry10.1109/JPHOTOV.2013.2278657 ↗
3. High-throughput front and rear side metallization of silicon solar cells using rotary screen printing10.1016/j.egypro.2017.09.343 ↗
4. Influence of silver paste rheology and screen parameters on the front side metallization of silicon solar cell10.1016/j.mssp.2014.08.023 ↗
5. Investigations of thick-film-paste rheology for dispensing applications10.1016/j.egypro.2011.06.164 ↗
6. Optimization of lead- and cadmium-free front contact silver paste formulation to achieve high fill factors for industrial screen-printed Si solar cells10.1016/j.solmat.2009.01.003 ↗
7. Pospischil · 2017
8. Enhancement of fine line print resolution due to coating of screen fabrics10.4071/1551-4897-6.1.13 ↗
9. Impact of wall slip on screen printing of front-side silver pastes for silicon solar cells10.1109/JPHOTOV.2016.2626147 ↗
10. The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes10.1016/j.matdes.2009.09.051 ↗
11. Koenen GmbH
12. D. Schwanke (Koenen GmbH) EP 1 967 363 B1, 2008.
13. Lorenz · 2018
14. 2018
15. 2011
16. Pospischil · 2012
17. Pospischil · 2016
18. A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure10.1016/0377-0257(94)01282-M ↗
19. Slip and flow in pastes of soft particles: direct observation and rheology10.1122/1.1795171 ↗
20. Challenges in rheological characterization of highly concentrated suspensions - a case study for screen-printing silver pastes
21. Slip behavior in liquid films on surfaces of patterned wettability: comparison between continuum and molecular dynamics simulations10.1103/PhysRevE.71.041608 ↗
22. Numerical study of the relationship between apparent slip length and contact angle by lattice Boltzmann method10.1016/S1001-6058(11)60275-8 ↗
23. Review of fluid slip over superhydrophobic surfaces and its dependence on the contact angle10.1021/ie0712941 ↗
24. Effects of temperature and surface roughness on time‐dependent development of wall slip in steady torsional flow of concentrated suspensions10.1122/1.550537 ↗
25. Mezger · 2014
26. How do soft particle glasses yield and flow near solid surfaces?10.1039/C1SM06074K ↗
27. The effect of nanometre-scale structure on interfacial energy10.1038/nmat2534 ↗
28. The rheology of concentrated dispersions of weakly attracting colloidal particles with and without wall slip10.1122/1.550387 ↗
29. Geometrical Product Specifications · 1996
30. Dispersion-polar surface tension properties of organic solids10.1080/0021846708544582 ↗
31. Apparent slip and viscoplasticity of concentrated suspensions10.1122/1.1879043 ↗
32. Plasma-enhanced chemical vapor deposition of functional coatings
33. 2010
34. Application of plasma enhanced chemical vapor deposition silicon nitride as a double layer antireflection coating and passivation layer for polysilicon solar cells10.1116/1.580509 ↗
35. Macosko · 1994
36. Wall slip and yielding in pasty materials10.1122/1.1595098 ↗
37. Hoornstra · 1997