journal article·2019-08

Tantalum carbide based spectrally selective coatings for solar thermal absorber applications

P. Kondaiah, K. Niranjan, Siju John, Harish C. Barshilia

Publisher page

Abstract

Abstract Tantalum carbide (TaC) based tandem coatings for selective absorption of solar radiation were fabricated by magnetron sputtering technique. Tandem structure of Ti/TaC/Al2O3 coating was deposited on a stainless steel substrate in which Ti acts as back reflection layer, TaC acts as main absorber layer and Al2O3 acts as an antireflection layer. The composition and thicknesses of the individual component layers have been optimized by adjusting the sputtering process parameters. Reactively sputtered TaC coating deposited at 85 W of sputtering power and 8 sccm of C2H2 flow rate showed an absorptance of 0.845 and emissivity of 0.14. After depositing approximately 50 nm thick Al2O3 on Ti/TaC, the absorptance increased to 0.957 and emissivity increased to 0.15. The refractive indices and extinction coefficients of each layer were used to simulate the reflectance spectra of the deposited tandem stack using SCOUT simulation software. For individual layer thicknesses of Ti, TaC and Al2O3 of 15, 55 and 50 nm, respectively a good match was obtained with the experimental and simulated reflectance spectra. The layer thicknesses were consistent with the thickness data of the tandem stack obtained from cross-sectional field emission scanning electron microscope image. The thermal stability of the tandem stack was examined in vacuum at different temperatures for a short duration. The results showed that the tandem stack is stable up to 500 °C for 2 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Kennedy · 2002
2. Review of physical vapor deposited (PVD) spectrally selective coatings for mid-and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
3. Optically selective coatings10.1007/BF02846338 ↗
4. Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
5. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
6. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
7. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1−y(OxN1−x). Part 1: advanced microstructural characterization and optical simulation10.1016/j.solmat.2017.10.015 ↗
8. Optical characterization of hafnium boride and hafnium carbide-based ceramics for solar energy receivers10.1016/j.solener.2018.04.036 ↗
9. Hafnium carbide based solar absorber coatings with high spectral selectivity10.1016/j.solmat.2018.05.005 ↗
10. Structure, optical properties and thermal stability of TiC- based tandem spectrally selective solar absorber coating10.1016/j.solmat.2016.06.050 ↗
11. Optical properties and failure analysis of ZrC-ZrOx ceramic based spectrally selective solar absorbers deposited at a high substrate temperature10.1016/j.solmat.2017.11.018 ↗
12. Stacked sputtering process for Ti, Ta, and W carbide formation for gate metal application10.1063/1.4821134 ↗
13. Trends in electrochemical stability of transition metal carbides and their potential use as supports for low-cost electrocatalysts10.1021/cs500182h ↗
14. Pulsed laser deposited hard TiC, ZrC, HfC and TaC films on titanium: hardness and an energy- dispersive X-ray diffraction study10.1016/j.surfcoat.2007.06.060 ↗
15. Elastic properties of tantalum carbide (TaC)10.1016/j.ssc.2005.01.036 ↗
16. Optical properties of tantalum carbide from the infrared to the near ultraviolet10.1103/PhysRevB.29.836 ↗
17. Variation of electrical resistivity of cubic tantalum carbide with composition10.1063/1.1734024 ↗
18. Electronic structure and optical properties of TaC from the first principles calculation10.1140/epjb/e2005-00127-2 ↗
19. Electronic structure, Compton profiles and optical properties of TaC and TaN10.1016/j.radphyschem.2010.06.009 ↗
20. Spectrally selective surfaces and their impact on photothermal solar energy conversion
21. Epitaxy and recrystallization kinetics of TaC thin films on SiC for high temperature processing of semiconductor devices10.1063/1.2748858 ↗
22. Coatings made of tungsten carbide and tantalum carbide for machine tools10.1016/j.vacuum.2009.10.032 ↗
23. Tantalum carbide films synthesized by hot-filament chemical vapor deposition technique10.1016/j.surfcoat.2011.12.002 ↗
24. Formation of thin carbide films of titanium and tantalum by methane plasma immersion ion implantation10.1016/j.nimb.2007.01.076 ↗
25. Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings10.1016/j.surfcoat.2016.11.073 ↗
26. J.A. Duffie, W.A. Beckman Solar Engineering of Thermal Process, Wiley Publications, third ed. ISBN 0-471-69867-9.
27. Kittel · 2005
28. Influence of deposition parameters on the composition and structure of reactively sputtered nanocomposite TaC/a-C:H thin films10.1557/jmr.2005.0324 ↗
29. XPS investigation of monatomic and cluster argon ion sputtering of tantalum pentoxide10.1016/j.apsusc.2017.02.006 ↗
30. Formulation for XPS spectral change of oxides by Ar ion bombardment: application of the formulation to Ta2O5 system
31. Defect states in substoichiometric tantalum carbide10.1103/PhysRevB.34.3841 ↗
32. Control of thermal emittance of stainless steel using sputtered thin films for solar thermal power applications10.1016/j.solmat.2014.11.002 ↗
33. Antireflective coatings: conventional stacking layers and ultrathin plasmonic metasurfaces a mini-review10.3390/ma9060497 ↗
34. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
35. Dielectric properties of DC magnetron sputtered Al2O3 films10.1016/j.tsf.2011.11.040 ↗
36. Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3 based nanostructured multilayered absorber coating through graded optical spectra10.1016/j.solmat.2017.11.013 ↗
37. W. Thesis, in Scout Thin Film Analysis Software Handbook, Hard and Software. ed. by M. Thesis (Aachen, Germany) (www.mthesis.com).
38. Thin film of aluminum oxide through pulsed laser deposition: a micro-Raman study10.1016/S0921-5107(00)00554-7 ↗
39. Laser ablation synthesis of tantalum carbide particles with specific phase assemblage and special interface10.1007/s00339-015-9171-7 ↗
40. A study on the oxidation and carbon diffusion of TiC in alumina–titanium carbide ceramics using XPS and Raman spectroscopy10.1016/S0254-0584(98)00187-4 ↗
41. Carbon diffusion in alumina from carbon and Ti2AlC thin films10.1063/1.3573490 ↗