A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell
Source abstract
Abstract
Abstract We developed a new wet-chemical method to grow the high-quality tunnel silicon oxide (SiOx) layer by using a strong-oxidizing mixed acid, which consists of three volumes of HNO3 (68 wt%) and one volume of H2SO4 (98 wt%), named as the CNS (concentrated nitric and sulfuric) acid for short. In comparison with the HNO3 acid, the CNS acid grows high-quality SiOx layer with the higher oxidized state at 60 °C, where the relatively low temperature avoids the significant volatilization of acid and remains the quality of acid during the extending process. The results prove that the SiOx grown in the CNS acid benefits for the surface passivation of the n-type polysilicon passivated contact structure. An average gain of implied open circuit voltage (iVoc) by 2–10 mV and a reduction of single-side surface saturated dark current (J0) by 1–7 fA/cm2 are obtained by using the 60 °C CNS-acid grown SiOx to replace the 60 °C HNO3-acid grown one. Also, in comparison with the 90 °C HNO3 acid, the 60 °C CNS acid exhibits improved stability and repeatability for preparing the SiOx during the extending process. The CNS-acid grown SiOx helps the polysilicon passivated contact solar cell to raise the efficiency by ~ 0.15% on average. In summary, the CNS acid has shown the potential for industrial application, which improves not only the manufacturing process but also the device performances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. n-type Si solar cells with passivating electron contact: Identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
2. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
3. Industrial high performance crystalline silicon solar cells and modules based on rear surface passivation technology10.1016/j.solmat.2013.06.025 ↗
4. F. Feldmann, M. Bivour, C. Reichel, M. Hermle, S. Glunz, A passivated rear contact for high-efficiency n-type silicon solar cells enabling high Vocs and FF> 82%, in: Proceedings of the 28th European PV Solar Energy Conference and Exhibition, 2013.
5. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
6. Improvement of the SRH bulk lifetime upon formation of n-type POLO junctions for 25% efficient Si solar cells10.1016/j.solmat.2017.05.055 ↗
7. Large area tunnel oxide passivated rear contact n‐type Si solar cells with 21.2% efficiency10.1002/pip.2739 ↗
8. Poly-SiOx passivating contacts for high-efficiency c-Si IBC solar cells10.1016/j.egypro.2017.09.257 ↗
9. R. Goslich, 26.1% record efficiency for p-type crystalline Si solar cells, by ISFH 〈https://idw-online.de/en/news688784〉, 2018.
10. F. Feldmann, B. Steinhauser, V. Arya, A. Büchler, A.A. Brand, S. Kluska, M. Hermle, S.W. Glunz, Evaluation of TOPCon technology on large area solar cells, in: Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition, 2017, pp. 465–467.
11. J. Krügener, F. Haase, M. Rienäcker, R. Brendel, R. Peibst, H.J. Osten, Improvement of the SRH bulk lifetime upon formation of n-type POLO junctions for 25% efficient Si solar cells, in: Proceedings of International Conference on Silicon Photovoltaics, 2017.10.1016/j.solmat.2017.05.055 ↗
12. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
13. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers grown by photo-oxidation or wet-chemical oxidation in ozonized water10.1016/j.solmat.2015.06.048 ↗
14. Simple cleaning and conditioning of silicon surfaces with UV/ozone sources10.1016/j.egypro.2014.08.067 ↗
15. Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide10.1063/1.4986924 ↗
16. Study of pinhole conductivity at passivated carrier-selected contacts of silicon solar cells10.1016/j.egypro.2016.07.040 ↗
17. Theoretical exploration towards high-efficiency tunnel oxide passivated carrier-selective contacts (TOPCon) solar cells10.1016/j.solener.2017.07.014 ↗
18. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗