Enhancement of electrothermal performance in single-walled carbon nanotube transparent heaters by room temperature post treatment
Source abstract
Abstract
Abstract High-performance transparent heaters were fabricated on glass substrate using spray coating the solution processed single walled carbon nanotubes (SWCNT). Transparent heaters were treated with acid and alcohol mixture (10:1) to display high heating performance. The post treated SWCNT heater with 81% transmittance at 550 nm reached a steady-state temperature of 424 K with a heating rate of 0.6 K/s when 60 V is applied. The enhancement of electrothermal performance was studied in terms of heating rate, input power density and applied voltage. The enhanced heating performance attributed due to the effective wetting of the SWCNT network which intern reduce the sheet resistance of the conducting films. Defrosters realized using the post treated heater able to remove frost within a minute when 30 V was applied. The excellent power dependent heating performance with high stability indicates that the SWCNT heaters can be used in the temperature controlled heaters, smart windows and defrosters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Advanced Sensor and Energy Harvesting Materials · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Highly flexible transparent film heaters based on random networks of silver nanowires10.1007/s12274-012-0225-2 ↗
2. Influence of temperature and layers on the characterization of ITO films10.1016/j.jmatprotec.2008.09.016 ↗
3. Heat dissipation of transparent graphene defoggers10.1002/adfm.201201155 ↗
4. Uniformly interconnected silver-nanowire networks for transparent film heaters10.1002/adfm.201202013 ↗
5. Large-size graphene microsheets as a protective layer for transparent conductive silver nanowire film heaters10.1016/j.carbon.2013.12.046 ↗
6. Heat pipes in modern heat exchangers10.1016/j.applthermaleng.2003.12.004 ↗
7. Miniaturized PCR chips for nucleic acid amplification and analysis: latest advances and future trends10.1093/nar/gkm389 ↗
8. A thermopneumatic dispensing micropump10.1016/j.sna.2004.05.015 ↗
9. A self-heating gas sensor with integrated NiO thin-film for formaldehyde detection10.1016/j.snb.2006.06.018 ↗
10. Predicting efficiency of solar cells based on transparent conducting electrodes10.1063/1.4973117 ↗
11. Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates10.1063/1.126052 ↗
12. Transparent film heater using single-walled carbon nanotubes10.1002/adma.200701173 ↗
13. Metallic nanowire-based transparent electrodes for next generation flexible devices: a review10.1002/smll.201602581 ↗
14. High-performance graphene-based transparent flexible heaters10.1021/nl202311v ↗
15. Fabrication of large area, high-performance, transparent conducting electrodes using a spontaneously formed crackle network as template10.1002/admi.201400090 ↗
16. Rapid electrothermal response of high-temperature carbon nanotube film heaters10.1016/j.carbon.2013.03.039 ↗
17. Visibly Transparent Heaters10.1021/acsami.5b11026 ↗
18. Preparation of large-area double-walled carbon nanotube films and application as film heater10.1016/j.physe.2009.09.003 ↗
19. Thermal behavior of transparent film heaters made of single-walled carbon nanotubes10.1021/jp910799a ↗
20. The manufacture of a transparent film heater by spinning multi-walled carbon nanotubes10.1016/j.carbon.2010.08.049 ↗
21. Highly efficient CNT functionalized cotton fabrics for flexible/wearable heating applications10.1039/C4RA10667A ↗
22. Thickness-dependent thermal resistance of a transparent glass heater with a single-walled carbon nanotube coating10.1016/j.carbon.2010.11.012 ↗
23. Doping and de-doping of carbon nanotube transparent conducting films by dispersant and chemical treatment10.1039/b717387c ↗
24. Effect of chemical treatment on electrical conductivity, infrared absorption, and raman spectra of single-walled carbon nanotubes10.1021/jp044741o ↗
25. Electronic properties of single-walled carbon nanotube networks10.1021/ja043153l ↗
26. Stability of doped transparent carbon nanotube electrodes10.1002/adfm.200800324 ↗
27. Using oxidation to increase the electrical conductivity of carbon nanotube electrodes10.1016/j.carbon.2009.03.005 ↗
28. Highly transparent and conductive thin films fabricated with nano-silver/double-walled carbon nanotube composites10.1016/j.jcis.2011.08.029 ↗
29. 2D graphene oxide nanosheets as an adhesive over-coating layer for flexible transparent conductive electrodes
30. Fabrication and effect of post treatment on flexible single-walled carbon nanotube films10.1007/s10854-009-9963-7 ↗
31. Reduced diameter distribution of single-wall carbon nanotubes by selective oxidation10.1016/S0009-2614(02)01253-8 ↗
32. Plasma etching for purification and controlled opening of aligned carbon nanotubes10.1021/jp014047y ↗
33. Purification of single-walled carbon nanotubes synthesized by the hydrogen arc-discharge method10.1557/JMR.2001.0346 ↗
34. Transparent heaters based on solution-processed indium tin oxide nanoparticles10.1016/j.tsf.2009.10.164 ↗
35. Flexible and transparent electrothermal film heaters based on graphene materials10.1002/smll.201101305 ↗
36. Extreme thermal stability of carbon nanotubes10.1002/pssb.200776148 ↗
37. Ignition of carbon nanotubes using a photoflash10.1016/j.carbon.2006.12.033 ↗
38. Experimental observation of an extremely dark material made by a low-density nanotube array10.1021/nl072369t ↗
39. Effective medium theory of the optical properties of aligned carbon nanotubes10.1103/PhysRevLett.78.4289 ↗